Attachment 01 - Certificates of Analysis.pdf

CERTIFICATE OF ANALYSIS

For those material(s) identified below, a Certificate of Analysis (C of A) shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).

The information contained on the Certificate of Analysis shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below.

Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.

The certificate of analysis shall contain the following:

a. Name and address of Manufacturer and Supplier when *applicable.

(*If not manufactured by the Supplier.)

b. Purchase order number.

c. Identification of material by Drawings, Revisions and Part Number.

d. Quantity of material.

e. Material results shall address drawing specifications.

Item: 57A/B Body Top, IAW Dwg. 3928AS122 Rev. C Made from Material: PPE + PS Blend - 20%

Glass Reinforced IAW Dwg. 3928A132 Rev. C Part No.: NORYL, GFN2 – 701 20% Glass Fiber.

Color: Black.

Note: Body Top shall be identified with a traceable lot number at time of delivery.

Lot number shall include traceability of Tungsten Ballast.

Note: Body Top shall be Identifiable / Traceable to Individual Cavities of Mold.

Item(s) cannot be accepted without documentation to support the above material was used to produce.

f. Quantity tested, sample size, and specimen type as applicable.

g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.

03 March, 2021.

CERTIFICATE OF ANALYSIS

For those material(s) identified below, a Certificate of Analysis (C of A) shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).

The information contained on the Certificate of Analysis shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below.

Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.

The certificate of analysis shall contain the following:

a. Name and address of Manufacturer and Supplier when *applicable.

(*If not manufactured by the Supplier.)

b. Purchase order number.

c. Identification of material by Drawings, Revisions and Part Number.

d. Quantity of material.

e. Material results shall address drawing specifications.

Item: 57A/B Body Bottom, IAW Dwg. 3928AS120 Rev. E Made from Material: PPE + PS Blend - 20%

Glass Reinforced IAW Dwg. 3928A132 Rev. C Part No.: NORYL, GFN2 – 701 20% Glass Fiber.

Color: Black.

Note: Body Bottom shall be identified with a traceable lot number at time of delivery.

Lot number shall include traceability of Nozzle.

Note: Body Bottom shall be Identifiable / Traceable to Individual Cavities of Mold.

Item(s) cannot be accepted without documentation to support the above material was used to produce.

f. Quantity tested, sample size, and specimen type as applicable.

g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.

03 March, 2021