Attachment 0011 AED Requirments.pdf
PDF 5 KB Posted
- Attached to
- IFB for Overhaul of the CH-47 Steering Unit
- Solicitation number
- W58RGZ-21-B-0005
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
10/25/2021
M555PRID 414L2410-1Part Number
1620-01-350-4882NSN CH-47System
STEERING UNITNomenclature
YAdequate DMWR Available?
DMWR-55-1620-224DMWR ID
02/06/2015DMWR Date
DMWR Chg #
YPre-Award Survey Recommended?
NCorrelation Performance Study Required ? YPVA Recommended?
Approved source(s) will identify all inspection measurement procedures and equipment, including nondestructive testing (NDT) procedures, if required, to perform overhaul.
The overhaul facility is responsible for acquisitions, maintenance, calibration, and disposition of all Test, Measurement, and Diagnostic Equipment (TMDE). TMDE shall be maintained and controlled in accordance with MIL-I-45607, ISO10012, NCSL Z540.3, or AMCOM-R 702-7. Calibration documents for all TMDE shall be traceable to the National Institute of Standards and Technology (NIST).
Identify Any Special Processes, Test Procedures, and/or Instructions
NCritical Safety Item?
No recent AED review of issues impacting airworthiness. However, historical AED review did not identify any airworthiness issues, or concerns of reliability or durability.
Special Airworthiness Considerations
FCDD-AMR-AM Sustainment verified the CSI/NST status through the ARISE CIM database on 24 November 2020 and the part is Non-CSI and Non-NST. JC
Other Requirements / Comments
If the item is not a CSI and no adequate DMWR is available, approved sources, if any, are listed by CAGE as follows:
YSpecial Post-Contract Award Requirements?
The Prime or OEM is required to submit an M&O plan to the Maintenance Engineering Division, FCDD-AMR-AM, for review and approval 30-days after contract award.
Special Post-Contract Award Requirements
The applicable DMWR contains detailed procedures regarding IUID requirements for this component. These procedures can be found in MEOs D1919, D1920, and D1921.
Other Requirements / Comments (Part II)
AMR-AM Sustainment has reverified the CSI/NST status through the ARISE CIM and the part is still Non-CSI and Non-NST, There are no required changes. DEM
Other Requirements / Comments (Part III)
FCDD-AMR-MS Quality Requirements Branch has reverified the CSI/NST status through the ARISE CIM on 20 October 2021 and the part is still Non-CSI and Non-NST. There were no required changes.JC
Other Requirements / Comments (Part IV)
Other Requirements / Comments (Part V)
NDoes QE-STD-2 Apply?
N
Additional CSI Requirements
CSI Contains CSI Replacement Parts? NEngineering Testing Required?
The solicitation/RFP shall require that all proposals/responses include a special tooling and test equipment section that addresses the contractor's plan to meet all government special tooling and test equipment requirements with either:
1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools.
RStatus
YTDPL?
Approved Date
M&O AED REQUIREMENTS DATA
Correlation Performance Study Requirements
Commerciality Determination
Commercial Item? N NBest Commercial Practice Acceptable?
10/25/2021
M555PRID 414L2410-1Part Number
1620-01-350-4882NSN CH-47System
C4598
D1642B
D1657A
D1919
D1920
D1921
Approved Source(s) will identify critical tools and test/inspection equipment required to perform overhaul.
Critical Tools and Test and Inspection Equipment Requiring AED Approval for Substitutes
MEOs Required for Competitive Contract?
RStatus
File details come from the government source that posted it. Updated .