Attachment 0007 MO AED REQUIREMENTS DATA.pdf

11/04/2021

M361-01PRID 114P4111-3Part Number

2915-00-852-6813NSN CH-47System

PUMP, SUBMERGED, AIRCRAFTNomenclature

YAdequate DMWR Available?

DMWR-55-2915-296DMWR ID

09/02/2014DMWR Date

DMWR Chg #

YPre-Award Survey Recommended?

NCorrelation Performance Study Required ? YPVA Recommended?

Approved source(s) will identify all inspection measurement procedures and equipment, including nondestructive testing (NDT) procedures, if required, to perform overhaul.

The overhaul facility is responsible for acquisitions, maintenance, calibration, and disposition of all Test, Measurement, and Diagnostic Equipment (TMDE). TMDE shall be maintained and controlled in accordance with MIL-I-45607, ISO10012, NCSL Z540.3, or AMCOM-R 702-7. Calibration documents for all TMDE shall be traceable to the National Institute of Standards and Technology (NIST).

Identify Any Special Processes, Test Procedures, and/or Instructions

NCritical Safety Item?

The Systems Readiness Directorate (SRD), Cargo Airworthiness Division has reviewed the subject request from an airworthiness and engineering perspective. SRD research concluded there are not any emerging airworthiness issues, new Engineering Change Proposals (ECPs) affecting Critical Safety Items (CSIs), and/or concerns over reliability, durability, etc. for the subject part.

Special Airworthiness Considerations

FCDD-AMR-M Sustainment verified the CSI/NST status through the ARISE CIM database on 29 October 2020 and the part is Non-CSI and Non-NST.JC

Other Requirements / Comments

If the item is not a CSI and no adequate DMWR is available, approved sources, if any, are listed by CAGE as follows:

NSpecial Post-Contract Award Requirements?

Special Post-Contract Award Requirements

DMWR -55-2915-296 does not contain detailed IUID requirements for this component. The PM has not tasked SRD to update this DMWR to incorporate IUID detailed procedures. Recommend contacting the CH-47 PM IUID Office, Jennifer Bishop (256) 876-8526, for any updates and/or waiver/deviation of IUID Contracting DFAR clauses on the IUID marking of the Pump, Submerged, Aircraft.

Other Requirements / Comments (Part II)

FCDD-AMR-MS- Quality Requirements Branch has reverified the CSI/NST status through the ARISE CIM on 28 October 2021 and the Part is Non-CSI and Non-NST. There were no required changes.JC

Other Requirements / Comments (Part III)

Other Requirements / Comments (Part IV)

Other Requirements / Comments (Part V)

NDoes QE-STD-2 Apply?

N

Additional CSI Requirements

CSI Contains CSI Replacement Parts? NEngineering Testing Required?

The solicitation/RFP shall require that all proposals/responses include a special tooling and test equipment section that addresses the contractor's plan to meet all government special tooling and test equipment requirements with either:

1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools.

RStatus

YTDPL?

Approved Date

M&O AED REQUIREMENTS DATA

Correlation Performance Study Requirements

Commerciality Determination

Commercial Item? N NBest Commercial Practice Acceptable?

11/04/2021

M361-01PRID 114P4111-3Part Number

2915-00-852-6813NSN CH-47System

D1268 Approved Source(s) will identify critical tools and test/inspection equipment required to perform overhaul.

Critical Tools and Test and Inspection Equipment Requiring AED Approval for Substitutes

MEOs Required for Competitive Contract?

RStatus