Attachment 0004 12977454 REV K 120MM DRAWING.pdf
PDF 239 KB Posted
- Attached to
- Obturating Rings (60MM, 81MM, & 120MM) Federal contract opportunity
- Solicitation number
- W519TC-25-R-2003
About this file
This document is a technical drawing for an Obturating Ring (120MM), which is part of a federal contract opportunity issued by the Department of the Army Materiel Command Contracting Command Rock Island Arsenal. The drawing, Revision K dated August 10, 2016, provides detailed specifications for the 120MM Obturating Ring, including material requirements, mechanical properties, dimensions, and manufacturing tolerances. The related federal contract opportunity, Solicitation Number W519TC-25-R-2003, is for Obturating Rings in 60MM, 81MM, and 120MM sizes, to be used on various weapons systems including the M930, M983, and M929. The contract is set aside for the Department of Defense and DoD contractors, and the government has unlimited rights in the technical data. No award date is provided, but the drawing and solicitation indicate the government's ongoing requirement for these Obturating Ring components.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B08 - Solicitation - W519TC25R2003 P00002.pdf | ||
| B08 - Solicitation - W519TC25R2003 P00001.pdf | ||
| B08 - W519TC-25-R-2003_Obturating Rings_Solicitation.pdf | ||
| B08 - Attachment 0001_Drawing Request Instructions.pdf | ||
| B08 - Attachment 0001_Drawing Request Instructions.pdf | ||
| B08 - W519TC-25-R-2003_Obturating Rings_Solicitation.pdf | ||
| Attachment 0003 9310339 REV AB 81MM DRAWING.pdf | ||
| Attachment 0002 13005177 REV G 60MM DRAWING.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
C
D
E
F
A
B
C
D
E
F
8 7 6 5 4 3 2 1DRAWING SIZE F
SIZE CAGE CODE
SCALE SHEET
FORMAT: F_TACOM_ENG_1_0
UNIT WT.
DESIGN ACTIVITYCONTRACT NUMBER
CONTRACTOR
DRAWN BY DATE (YEAR-MO-DA)
CHECKER ENGINEER
ENGINEER QUALITY ENGINEER
DRAWNG APPROVAL
DESIGN APPROVAL
THIRD ANGLE PROJECTION
MATL ENGR MODELED BY
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES ON ANGLES �#� �$�
2 PLACE DECIMALS �#�
3 PLACE DECIMALS �#�
PMIC
12345678
DWG NO.
0.152 0.005
2X 45�$�1�$�
MAX0.295
4.265 0.002
2X 0.08 0.02
140�$�5�$�
2X
0.096 0.001
0.187 0.005
120.00�$�
0.035 0.010
4X 0.140 +0.000 -0.015
4X 0.07 +0.01 -0.00
4X 0.084 +0.000 -0.012
2X 0.084 +0.000 -0.012
6X 60�$�1�$�
.283�#�.007 MAX REF.0.295
6X 0.055 0.006
.140�#�.002
.03 MAX
REVISIONS
APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REV
BAC2010-04-01
REDRAWN WITH CHANGE
NOR R09J2035 / 2010-03-15
H
AMW2011-09-26NOR R11J2007 / 2011-09-22J
BMG2016-08-10NOR R16J2008 / 2016-08-04K
1 OF 10.000 2.000
1297745419200F
OBTURATING RING
US ARMY
ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER
PICATINNY ARSENAL, NEW JERSEY 07806-5000
V. DANTON 2000-10-10
J. SMITH 2010-03-15
R. COLON 2010-03-15
DO NOT SCALE DRAWING
V. DANTON
12577503 M930
12967862 M983
13013454 M933A1
13010093 M934A2
12977141 M934A1
12983040 M931
12957039 M931
NEXT ASSY USED ON
APPLICATION
MECHANICAL
PROPERTIES
YP
TS
EL2
RA
BH
RH
PART NO. 12977454
THIS DRAWING WAS GENERATED FROM A SOLID MODEL
AND IS CAD MAINTAINED. CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
NSN
NOTES:
1. APPLICABLE STANDARDS/SPECIFICATIONS:
A. ASME Y14.100
B. MIL-STD-100E
C. ANSI Y14.5M-1982
D. MIL-A-002550
E. DTL12977454
2. MATERIAL: POLYCARBONATE PER ASTM D3935-PC 110G10A99990
(LEXAN 500R, OR PC MATERIAL WITH COMPARABLE PROPERTIES, 10%
GLASS ENFORCED).
MECHANICAL & PHYSICAL PROPERTIES
2.1 MELT FLOW RATE-4 TO 13 G/10 MINUTES (METHOD ASTM D1238)
2.2 TENSILE YIELD STRENGTH-56 MPA MIN. (METHOD ASTM D638)
2.3 FLEXURAL MODULUS-3000 MPA MIN (MEHTOD ASTM D790)
2.4 IZOD IMPACT STRENGTH - 95 J/M MIN. (METHOD ASTM D256)
2.5 DEFLECTION TEMPERATURE UNDER 1820 KPA LOAD, 130 DEGREES
C MIN. (METHOD ASTM D648)
3. SURFACE FINISH ALL OVER.
END OF TAPERED SECTION.
APPLIES WHEN PART IS PLACED ON A 4.378" DIA. PLUG.
6. TIGHT FLASH AND MOLD MARKS WITHIN
TOLERANCE PERMITTED.
APPLIES WHEN PART IS PLACED ON A 4.370" DIA. PLUG.
8. BONDED OBTURATING RING SHALL BREAK APART IN NOTCHED AREA(S) WHEN PULL TESTED IAW DTL12977454.
BREAK FORCE SHALL NOT EXCEED 280 POUNDS (127 KG) NOR SHALL BE LESS THAN 178.5 POUNDS (81KG)
9. WHEN PART IS PLACED ON A 4.382" DIA PLUG, MAXIMUM ALLOWABLE O.D. OF OBTURATOR IS 4.704".
DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE (DOD) AND DOD CONTRACTORS ONLY.
THIS TECHNICAL DATA PACKAGE CONTAINS SENSITIVE TECHNOLOGY ON A NEW WEAPONS SYSTEM.
THIS DETERMINATION WAS MADE ON 23 MAY 96. OTHER REQUESTS SHALL BE REFERRED TO
COMMANDER, ARDEC, ATTN: RDAR-MEM-M, PICATINNY ARSENAL, NJ 07806-5000.
THE UNITED STATES GOVERNMENT HAS UNLIMITED RIGHTS
IN THE TECHNICAL DATA IN THIS DOCUMENT. ANY COPY
OR MODIFICATION OF THIS DOCUMENT, OR ANY DERIVATIVE
WORK CREATED THEREFROM, IN WHOLE OR IN PART,
MUST INCLUDE THIS LEGEND. ANY CLAIM BY ANOTHER TO
THE RIGHTS OF THE UNITED STATES GOVERNMENT IN THIS
DATA IS A VIOLATION OF FEDERAL LAWS AND REGULATIONS.
DISTRIBUTION STATEMENT D:
SEE DETAIL A
DENOTES SPLIT
FULL DEPTH
AS SHOWN
DETAIL A
SCALE 2.000
SEE DETAIL C
SECTION A-A
DENOTES SPLIT
FULL LENGTH
SECTION B-B
DENOTES SPLIT
FULL DEPTH
SECTION C-C
DENOTES SPLIT
FULL DEPTH
SECTION D-D
DETAIL C
SCALE 2.000
SECTION E-E
| Sheet 1 |
| Views |
| new_view_1 |
| right_2 |
| A |
| bottom_5 |
| new_view_7 |
| new_view_8 |
| new_view_10 |
| C |
| new_view_13 |
File details come from the government source that posted it. Updated .