Attachment 0003 - Maintenance and Overhaul Guidance.pdf

07/10/2019

M639-01PRID 145H7300-31Part Number

1650-01-548-6686NSN CH-47System

CYLINDER ASSEMBLYNomenclature

YAdequate DMWR Available?

DMWR-1-1650-397DMWR ID

09/06/2011DMWR Date

DMWR Chg #

NPre-Award Survey Recommended?

NCorrelation Performance Study Required ? YPVA Recommended?

Modification procedure, final test procedure is a critical characteristic, plating and NDI process.

Identify Any Special Processes, Test Procedures, and/or Instructions

YCritical Safety Item?

There are no emerging airworthiness issues, no issues related to ECPs affecting the CSI status, and no concerns over reliability/durability for the CH-47 Cylinder Assembly at the time of this review

Special Airworthiness Considerations

AED Notes: FCDD-AMA-M-Sustainment has confirmed the CSI/NST status through the ARISE CIM database on 23 May 2019.

The part is a CSI and NST item. The Subcomponents are CSI and NST.Updated NHA table in CIM. DEM

Other Requirements / Comments

If the item is not a CSI and no adequate DMWR is available, approved sources, if any, are listed by CAGE as follows:

NSpecial Post-Contract Award Requirements?

Special Post-Contract Award Requirements

The Prime or OEM is required to submit a Frozen Plan 30 days after contract award to Engineering Directorate (ED) and Aviation Engineering Directorate (AED). The Frozen Plan will be reviewed and require approval by ED and AED prior to government acceptance of contract deliverable assets.

Other Requirements / Comments (Part II)

The applicable DMWR contains detailed procedures regarding IUID requirements for this component. These procedures can be found in MEO D2524, D2525, D2526, D2527.

Other Requirements / Comments (Part III)

1) End item is CSI and contains CSI; QE-STD 2 is required for frozen planning

2) Incorporation of WP0026 along with MEO E1869A are imperative to capture critical characteristics in the frozen planning.

3) CSI/CC warnings and QA inspection points for CCs shall be clearly labeled and legible in the frozen planning.

Other Requirements / Comments (Part IV)

AED Notes: FCDD-AMA-M-Sustainment has re-confirmed the CSI/NST status through the ARISE CIM database on 20 June 2019. The NHA part is still CSI and NST item. The Subcomponents are still CSI and NST. Engineering testing like Fatigue, Endurance, and interchange are not require for overhaul. There were no required changes.JC

Other Requirements / Comments (Part V)

YDoes QE-STD-2 Apply?

Y

Additional CSI Requirements

CSI Contains CSI Replacement Parts? YEngineering Testing Required?

The Contractor shall flow down the Critical Characteristics and QE-STD-1 to all Suppliers of CSIs.

The solicitation/RFP shall require that all proposals/responses include a special tooling and test equipment section that addresses the contractor's plan to meet all government special tooling and test equipment requirements with either:

1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools.

RStatus

YTDPL?

01/13/2007Approved Date

M&O AED REQUIREMENTS DATA

Correlation Performance Study Requirements

Commerciality Determination

Commercial Item? N NBest Commercial Practice Acceptable?

07/10/2019

M639-01PRID 145H7300-31Part Number

1650-01-548-6686NSN CH-47System

D1159D

D1250

D1583A

D1654E

D1669

D1734

D1796

D1869A

D2190

D2210

D2524

D2525

D2526

D2527

D2536

D2636

D2643

Critical Tools and Test and Inspection Equipment Requiring AED Approval for Substitutes

MEOs Required for Competitive Contract?

RStatus