Attachment 0002 - Quality Requirements.pdf

QUALITY REQUIREMENTS: INSPECTION, ACCEPTANCE, QUALITY ASSURANCE,

AND RELIABILITY

INSPECTION AND ACCEPTANCE:

Inspection and acceptance will be at destination, unless otherwise provided herein. Until delivery and acceptance, and after any rejections, risk of loss will be on the contractor, unless loss results from negligence of the United States Government.

CERTIFIED MATERIAL TEST REPORTS:

For those material(s) identified below, a certified test report shall be made available to the Government Quality Assurance Representative (QAR). The test results contained on the certified test report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s). Availability of the certified test reports are in addition to other contract requirements and does not reduce or prejudice the Government's right to inspect supplies under other provisions of this contract. The test report(s) shall contain the following:

a. Name and address of supplier.

b. Purchase Order/Contract Number.

c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc.

d. Quantity of material.

e. Test results identified by reference to the applicable requirements.

f. Quantity tested, sample size, and specimen type as applicable.

g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of the test report content.

PACKAGING (PRESERVATION/PACKING/MARKING):

Containers shall be clearly marked, at a minimum, with the information as follows:

a. Name of contractor

b. Contract / Purchase Order Number

c. Description of items contained therein

d. Lot / Batch Number(s)

For packing requirements, see the Engineering Release Record.