Attachment 0002 - Certified Material analysis.pdf
PDF 167 KB Posted
- Attached to
- Compression Pads
- Solicitation number
- W519TC-24-Q-67CP
About this file
This document contains a certified material test report and certificate of analysis for silicone sponge rubber compression pads, as well as details for a related federal contract opportunity with the Department of the Army Materiel Command Contracting Command at Rock Island Arsenal. The material test report provides specifications for the silicone sponge rubber, including requirements for compression deflection, compression set, density, and service temperature. Documentation of test results from the manufacturer will be required to show that the raw materials used meet these specifications. The federal contract opportunity solicitation seeks these silicone sponge rubber compression pads for the 67/B Program, with a solicitation number of W519TC-24-Q-67CP and a response date of September 22, 2023.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 0005 - FAR 52.212-3 Alt 1.docx | DOCX document | |
| Attachment 0003 - Price Sheet.xlsx | XLSX spreadsheet | |
| Attachment 0004 - FAR 52.204-24.pdf | ||
| Attachment 0006 - Technical Data Package Information.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFIED MATERIAL TEST REPORT / CERTIFICATE OF ANALYSIS
For those material(s) identified below, a Certificate of Analysis (C of A) test report shall be provided to the government at time of delivery to CAAA (Crane Army Ammunition Activity).
The test results contained on the Certificate of Analysis report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the Certificate of Analysis may be in addition to other Purchase requirements and does not reduce or prejudice the Government’s right to inspect supplies under other provisions of this contract.
The test report(s) shall contain the following:
a. Name and address of Manufacturer and Supplier when *applicable.
(*If not manufactured by the Supplier.)
b. Purchase order number.
c. Identification of material by specification, revision, amendment and dates, together with type, grade, size etc. number.
d. Quantity of material.
e. Material testing results shall address drawing specifications.
Item Description: Silicone Sponge Rubber (Compression Pad).
Drawing: 3306AS119 Rev. H Dimensions: Ø 1.000” + .00 - .07 x (3/8).
Material: Silicone Spong Rubber, ASTM D6576 Type II-C, 3/8” Thick Sheet or Strip.
Further Material Requirements are as follows:
Compression Deflection (psi) ……. (ASTM D1056)…. 6–14.
Compression Set (%) ………………(ASTM D1056)…. 25 Max (< 5 Preferred).
Density (lb/ft³) …………………….…(ASTM D1056)…. 7.280-41.472.
Service Temperature (°F)………………………………...-65/ +300.
Item shall be in accordance with above Description, Drawing, Dimensions, and Material, Documentation to support Raw Material requirements due upon delivery to CAAA. Silicone sponge rubber cannot be accepted without documentation to support the required material was used to produce.
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Item: Silicone Spong Rubber.
Requirements for: - 67/B Program
22 September, 2023.
jacqueline.harper Jackie's
File details come from the government source that posted it. Updated .