Attachment 0001 - Statement of Work.pdf

Major Overhauls of Four (4) C32 Gensets

Scope of Work The Mat Sinking Unit requires an inframe major overhaul of four (4) Caterpillar C32 marine generator set engines. Two of the gensets are on Mooring Barge 7403 and two are on Power Barge 5014. The contractor will be required to disassemble, make repairs, and reassemble onsite on the barges at the Mat Sinking Unit. All aspects of the major overhauls shall be performed and completed in accordance with the manufacturer’s specifications/maintenance manual for a Caterpillar C32 marine genset. All parts to be replaced shall be new OEM Caterpillar parts or Caterpillar reconditioned parts where allowed. All reconditioned parts shall meet Caterpillar specifications. All new or reconditioned parts replaced shall have no less than a one-year factory Caterpillar warranty. All work shall be completed by technicians familiar with Caterpillar marine equipment.

Requirements

• Perform inframe major overhaul of four (4) Caterpillar C32 marine genset engines

• Two C32 gensets located on mooring barge 7403

• Arrangement number: 342-0538

• Serial numbers: G2M00081 & G2M00082

• Two C32 gensets located on power barge 5014

• Arrangement number: 342-0536

• Serial numbers: G2K00097 & G2K00098

• Perform in accordance with Caterpillar maintenance manual for major overhaul

• All parts shall be new or reconditioned (where specified in the manual)

• Perform all requirements no later than June 30, 2022

• Part List is attached at the end of this scope of work

Period and Location of Performance All work shall be completed no later than June 30, 2022.

All work will be completed onboard the Mat Sinking Unit at the following address:

2577 Haining Rd Vicksburg, MS, 39183

Payment and Invoicing Payment will only be given for work/requirements that are completed. The invoice(s) shall be sent to the following email addresses:

CEFC-B4invoices@usace.army.mil mailto:CEFC-B4invoices@usace.army.mil mailto:Nathanael.j.jabour@usace.army.mil

Security Requirements Access and General Protection/Security Policy and Procedures. All contractor and all associated sub-contractor employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

For contractors who do not require CAC but require access to a DoD facility or installation.

Contractor and all associated sub-contractor employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

Suspicious Activity Reporting Training (e.g. iWATCH, CorpsWatch, or See Something, Say Something). The contractor and all associated sub-contractors shall receive a brief/training (provided by the RA) on the local suspicious activity reporting program. This locally developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the project manager, security representative or law enforcement entity. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the COR NLT 5 calendar days after the completion of the training.

Will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas. All contract employees, including sub-contractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

Pre-screen candidates using E-Verify Program. The Contractor must pre-screen Candidates using the E-Verify Program (http://www.uscis.gov/e-verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-Verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award.

*When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, with the designated Government representative. This Form will be provided to the Contracting Officer and shall become part of the official contract file.

Veterans Employment Emphasis for U.S. Army Corps of Engineers Contracts:

In addition to complying with the requirements outlined in FAR Part 22.13, FAR Provision 52.222-38, FAR Clause 52.222-35, FAR Clause 52.222-37, DFARS 222.13 and Department of Labor regulations, U.S. Army Corps of Engineers (USACE) contractors and subcontractors at all tiers are encouraged to promote the training and employment of U.S. veterans while performing under a USACE contract. While no setaside, evaluation preference, or incentive are encouraged to seek out highly qualified veterans to perform services under this contract.

The following resources are available to assist USACE contractors in their outreach efforts:

Federal Veteran employment information at http://www.fedshirevets.gov/index.aspx Department of Labor Veterans Employment Assistance http://www.dol.gov/vets/ Department of Veterans Affairs-VOW to Hire Heros Act http://benefits.va.gov/vow/ Army Wounded Warriors Program- http://wtc.army.mil/modules/employers/index.html U.S. Chamber of Commerce Foundation-Hiring Our Heros http://www.hiringourheroes.org/

Guide to Hiring Veterans-Reference Material http://www.whitehouse.gov/sites/default/files/docs/ white_house_business_council_-_guide_to_hiring_veterans_0.pd

Parts List Per Engine

Line No Part Number & Description Quantity

0001 4289129 - GASKET 2

0002 1090076 - SEAL O RING 4

0003 7J2036 - SEAL-O-RING 2

0004 7C0307 - GASKET 4

0005 2P3760 - GASKET 1

0006 1090078 - SEAL O RING 2

0007 7W5648 - GASKET 1

0008 9N3040 - HOSE A 1

0009 1367227 - SEAL O RING 1

0010 6V5048 - SEAL-O-RING 1

0011 2287090 - SEAL-O-RING 2

0012 2385080 - SEAL-O-RING 2

0013 2287091 - SEAL-O-RING 2

0014 1P0436 - GASKET 1

0015 3770775 - SEAL O RING 1

0016 2147566 - SEAL-O-RING 1

0017 2287091 - SEAL-O-RING 1

0018 2385080 - SEAL-O-RING 4

0019 1367227 - SEAL O RING 2

0020 2287090 - SEAL-O-RING 2

0021 2385084 - SEAL-O-RING 1

0022 3H3385 - SEAL O RING 1

0023 6V6228 - SEAL O RING 1

0024 9X7385 - SEAL 1

0025 1R0755 - FUEL FILTER-S 2

0026 2147568 - SEAL-O RING 8

0027 2385080 - SEAL-O-RING 1

0028 2287090 - SEAL-O-RING 1

0029 6V5064 - SEAL O RING 2

0030 2H3935 - SEAL 1

0031 5B9169 - PLUG 2

0032 6L2280 - ZINC ROD 2

0033 2027530 - SEAL 4

0034 2147568 - SEAL-O RING 2

0035 3S9643 - LIP SEAL-REGULATOR 2

0036 6V9027 - SEAL-O-RING 1

0037 8T9588 - SEAL 1

0038 2485513 - WATER REGULATOR 2

0039 1R1808 - ENGINE OIL FILTER 2

0040 2P4305 - GASKET 4

0041 6N0824 - GASKET 1

0042 2348937 - SEAL-INTEGRA 1

0043 2395571 - SEAL-INTEGRA 1

0044 2147566 - SEAL-O-RING 1

0045 6V5048 - SEAL-O-RING 3

0046 3438888 - GASKET 2

0047 4N1946 - GASKET 1

0048 1090074 - SEAL O RING 1

0049 3J7354 - SEAL O RING 1

0050 6V1585 - SEAL O RING 1

0051 6V5063 - SEAL O RING 2

0052 6V6609 - SEAL 1

0053 8T1703 - SEAL-O-RING 1

0054 6V3250 - SEAL O RING 1

0055 9X7378 - SEAL 1

0056 8B6283 - GASKET 1

0057 2647811 - HOSE ELBOW-COOLING 1

0058 1121102 - SEAL O RING 2

0059 1090077 - SEAL O RING 2

0060 3421725 - FUMES FILTER 2

0061 3355870 - SEAL-RECTANG 2

0062 7W7778 - CLAMP-TURBO 2

0063 5S4517 - CLAMP-TURBO 2

0064 2W0482 - STUD 24

0065 5F3999 - SEAL 1

0066 1090076 - SEAL O RING 2

0067 2314708 - SEAL-O-RING 2

0068 6V3250 - SEAL O RING 1

0069 8T1703 - SEAL-O-RING 2

0070 1299452 - GASKET-EXHAUST 12

0071 2226456 - SEAL 1

0072 2253100 - SPACER PLATE 2

0073 3548484 - GASKET-PLATE 2

0074 5P8356 - SEAL 4

0075 2255966 - CAM BEARING/SLEEVE 2

0076 4N0685 - CAM BEARING 2

0077 4N6658 - CAM BEARING 2

0078 2253099 - GASKET-CYL HEAD 2

0079 2147568 - SEAL-O RING 1

0080 6V6609 - SEAL 1

0081 3487743 - BRIDGE-VALVE 24

0082 3134085 - SHAFT AS-RKR 1

0083 1924151 - BUTTON 12

0084 1965070 - NUT - JAM 12

0085 2588721 - ROCKER ARM BUTTON 12

0086 2744491 - SCREW-ROCKER 12

0087 8L2777 - O RING 12

0088 1501156 - BOLT-PIST OIL TUBE 12

0089 3556043 - PISTON OIL TUBES 12

0090 3591439 - SEAL AS-WATE 48

0091 6V6609 - SEAL 2

0092 2323226 - ROD BEARING-STD 12

0093 2829105 - BREATHER AS 2

0094 336031 - O-RING 2

0095 2247506 - SEAL-VALVE COVER 6

0096 3718950 - HOSE-BULK-CM 9

0097 3718950 - HOSE-BULK-CM 6

0098 3718119 - HOSE-BULK-CM 13

0099 3718946 - HOSE-CM-BULK 11

0100 3604171 - GASKET KIT-REAR 1

0101 4503022 - KIT-GASKET(W 1

0102 4806702 - GASKET KIT-FRONT 1

0103 4806705 - GASKET KIT-TRBINST 2

0104 5269671 - GASKET KT 1

0105 11R1279 - AUX WATER PUMP GRP 1

0106 0R4680 - WATER PUMP GROUP - not need for Power Barge Engines 1

0107 0R5513 - ENGINE OIL COOLER 1

0108 0R7242 - TURBO CARTRIDGE GP 2

0109 20R3929 - CYLINDER HEAD GRP 2

0110 20R0193 - CYLINDER PACK 12

0111 0R8210 - OIL PUMP GROUP 1

0112 20R2284 - FUEL INJECTOR GRP 12

0113 20R0967 - FUEL TRANSFER PUMP 1

0114 1U5516 - DISC 25

0115 6078034 - WIPER 1

0116 51147 - C5A CO SE A/S 8OZ 1

0117 30545 - CLEANER/BRAKE 12

0118 4526011 - GREASE CARTRIDGE 2

0119 30540 - CEMENT 2

0120 1522029 - AVIATION GSKT SEAL 1

0121 2436718 - MAIN BRG KIT-STD 1

0122 1135304 - SEAL 3

0123 8L2777 - O RING 12

0124 2588721 - ROCKER ARM BUTTON 12

0125 2744492 - SCREW-ROCKER 12

0126 20R3319 - ROCKER AS-INJECTOR 12

0127 3S2713 - NUT 12

0128 20R3317 - ROCKER AS-VALVE 12