Attachment 0001 SPI AK16572667.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

JS

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 12578067 (19207) GRILLE ASSEMBLY, METAL-AIR CLEANER 19207 AK16572667

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2510-01-657-2667 August 31, 2018

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 105.0 2.749 34.8 X 13.0 X 10.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 20

13. CLEANING 1-B AR PRESERVATIVE: MIL-PRF-16173, GR 4

MIL-STD-2073-1

14. DRYING 2-C - BLOCKING/BRACING: SEE NOTE

MIL-STD-2073-1

15. PACKING

3-D AR BARRIER MATERIAL: MIL-PRF-121,TY II

A. LEVEL A

4-E 2 CUSHIONING: A-A-59135, CL 2, GR A,

MIL-STD-2073-1 & NOTE G SIZE: 11 X 8 X 1/4

B. LEVEL B

NOT APPLICABLE 5-G 1 CONTAINER: ASTM D6880, CL 2, ST 1,

16. MARKING SIZE: 31-3/4 X 11-1/2 X 5-1/2

MIL-STD-129

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. APPLY PRESERVATIVE TO ALL UNPAINTED METAL SURFACES OF THE GRILLE ASSEMBLY.

C. FABRICATE BLOCKS “A”, “B”, AND “C” IN ACCORDANCE WITH CHART ON PAGE 2. SECURE BLOCKS “A”

AND “B” TO CONTAINER USING ASTM F1667 NAILS AS SHOWN IN SKETCH ON PAGE 2.

D. APPLY BARRIER MATERIAL BETWEEN ALL SECTIONS OF THE GRILLE ASSEMBLY THAT COME IN DIRECT

CONTACT WITH THE INTERIOR OF THE CONTAINER AND/OR BLOCKING/BRACING.

E. PLACE THE GRILLE ASSEMBLY INTO CONTAINER AS SHOWN IN SKETCH ON PAGE 3. APPLY A SINGLE

LAYER OF CUSHIONING WRAP (11 X 8 X 1/4) TO THE UNDERSIDE OF BLOCKS “C” (QTY 2). PLACE

BLOCKS “C” (QTY 2) LOOSELY INTO CONTAINER AS SHOWN IN SKETCH ON PAGE 3. SECURE

CONTAINER LID USING WOOD SCREWS.

F. CONTAINER IS CONSTRUCTED OF 1-INCH THICK NOMINAL LUMBER WITH 2 INCH THICK ONE PIECE

ENDS AND INCLUDES BEVELED SKIDS.

G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12578067 (19207) GRILLE ASSEMBLY, METAL-AIR CLEANER 19207 AK16572667

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2510-01-657-2667 August 31, 2018

17. NOTES/DRAWING (CONTINUED)

17.

BLOCK DESCRIPTION QTY NOTE

A

LUMBER: 3-1/4 X 1-1/2 X 31-5/8 (ACT)

LUMBER SHALL BE IN ACCORDANCE WITH

ASTM D6199, GROUP I OR II.

B

LUMBER: 2-3/4 X 1-1/2 X 31-5/8 (ACT)

LUMBER SHALL BE IN ACCORDANCE WITH

ASTM D6199, GROUP I OR II.

C

LUMBER: 2 X 4 (NOM) X 11-3/8

LUMBER SHALL BE IN ACCORDANCE WITH

ASTM D6199, GROUP I OR II.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages

A ( X 2 )

B ( X 2 )

FRONT AND SIDE OF CONTAINER

REMOVED FOR CLARITY

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12578067 (19207) GRILLE ASSEMBLY, METAL-AIR CLEANER 19207 AK16572667

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2510-01-657-2667 August 31, 2018

17. NOTES/DRAWING (CONTINUED)

18.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages

FRONT AND SIDE OF CONTAINER

REMOVED FOR CLARITY

C

( 2 PLACES )

CUSHIONING NOT SHOWN

FOR CLARITY