Attachment 0001 SPI AK15881669_A.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3871997C91 (338X5) LOCK,DRIVE SHAFT 19207 AK15881669

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-588-1669 11/15/2017 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 5.1 0.462 10.1 X 9.4 X 8.4

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, SEE NOTES C – D

13. CLEANING 1 A/R ITEM CONTENTS: SEE NOTE B

MIL-STD-2073-1 2 A/R ITEM PREPARATION: SEE NOTE C

14. DRYING 3 A/R ITEM CONSOLIDATION: SEE NOTE D

MIL-STD-2073-1

15. PACKING

a. LEVEL A

MIL-STD-2073-1 & NOTE F

b. LEVEL B

MIL-STD-2073-1 & NOTE F

16. MARKING

MIL-STD-129 & NOTE E

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PART NUMBER 3871997C91 (338X5) LOCK,DRIVE SHAFT, QTY 1, CONSISTS OF THE FOLLOWING:

TABLE 1 – ITEM CONTENTS

SEGREGATED

PACK NUMBER PART NUMBER CAGE DESCRIPTION QUANTITY

1 3871999C91 338X5 CYLINDER,DIFFERENTIAL 1

2 3872000C1 338X5 SHIM,ADJUSTING SHIM KIT 1

2.1 E75503136 3D6E9 1.1 WIDTH SHIM 1

2.2 E75503137 3D6E9 1.5 WIDTH SHIM 1

2.3 E75503342 3D6E9 2.0 WIDTH SHIM 1

2.4 E75503420 3D6E9 2.9 WIDTH SHIM 1

2.5 E75503422 3D6E9 3.2 WIDTH SHIM 1

2.6 E75503423 3D6E9 3.6 WIDTH SHIM 1

2.7 E75503138 3D6E9 3.9 WIDTH SHIM 1

2.8 E75503421 3D6E9 4.2 WIDTH SHIM 1

3 3871998C1 338X5 BOLT,CAPSCREW M10 X 1.5 95MM GR 10.9 2

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3871997C91 (338X5) LOCK,DRIVE SHAFT 19207 AK15881669

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-588-1669 11/15/2017 A

C. PREPARE SEGREGATED PACK NUMBERS 1 – 3 IN ACCORDANCE WITH THE FOLLOWING:

SEGREGATED PACK NUMBER: 1 PART NUMBER: 3871999C91

DESCRITION: CYLINDER,DIFFERENTIAL QUANTITY: 1

1. SEAL ALL OPENINGS WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.

2. WRAP: MIL-PRF-121, TY II, SIZE: 18 X 18, WRAP ITEM ENTIRELY, SECURE WITH TAPE

3. CUSHIONING: A-A-59135, CL 1, GR A, SIZE: 66 X 24, WRAP ITEM IN FOAM, SECURE WITH TAPE.

4. INNER CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 8 X 7 X 7, CLOSE

INNER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

5. BAG: MIL-DTL-117, TY I, CL E, ST 1, CLOSE BAG BY HEAT SEAL.

6. OUTER CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR, GR W5c, VR SW, SIZE: 8-1/2 X 7-1/2 X 7-

3/4, CLOSE OUTER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

7. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 1”.

8. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 42.

SEGREGATED PACK NUMBER: 2 PART NUMBER: 3871999C91

DESCRITION: SHIM,ADJUSTING SHIM KIT QUANTITY: 1

NOTE: SEGREGATED PACK NUMBER 2 CONSISTS OF SEGREGATED PACK NUMBERS 2.1 – 2.8, SEE

TABLE 1. PACKAGE EACH ITEM INDIVIDUALLY IN ACCORDANCE WITH THE FOLLOWING:

1. BAG: MIL-DTL-22020, TY I, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH ITS SEGREGATED PACK NUMBER AS ASSIGNED IN

TABLE 1.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

4. PRESERVATION, METHOD 20.

CONSOLIDATE INDIVIDUAL BAGS IN ACCORDANCE WITH THE FOLLOWING:

5. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 4 X 6, CLOSE BAG BY HEAT SEAL OR TAPE.

6. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 2”.

7. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 10.

SEGREGATED PACK NUMBER: 3 PART NUMBER: 3871999C91

DESCRITION: BOLT,CAPSCREW M10 X 1.5 95MM GR 10.9 QUANTITY: 2

1. BAG: MIL-DTL-22020, TY I, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 2”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION, METHOD 20.

D. CONSOLIDATION: CONSOLIDATE SEGREGATED PACK NUMBERS 1 – 3 IN ACCORDANCE WITH THE

FOLLOWING:

1. CUSHIONING: A-A-59136, CL1, GR A, SIZE 5 X 8 X 1” THICKNESS, POSITION AS SHOWN IN

FIGURE 2, SECURE IN PLACE USINGTAPE.

2. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR, GR W5C, VR SW, SIZE: 9 X 8 X 9-1/4, PLACE

ITEMS IN CONTAINER AS SHOWN IN FIGURES 1 & 2, CLOSE CONTAINER IN ACCORDANCE WITH

ASTM-D1974, METHOD 2B6.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

4. PRESERVATION, METHOD 20.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3871997C91 (338X5) LOCK,DRIVE SHAFT 19207 AK15881669

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

EE.. PPRROOVVIIDDEE AA PPAACCKKIINNGG LLIISSTT WWIITTHH TTHHEE UUNNIITT PPAACCKK IINN AACCCCOORRDDAANNCCEE WWIITTHH MMIILL--SSTTDD--112299 IIDDEENNTTIIFFYYIINNGG TTHHEE IINNCCLLUUDDEEDD IITTEEMMSS.. OONN TTHHEE PPAACCKKIINNGG LLIISSTT,, IIDDEENNTTIIFFYY TTHHEE IITTEEMMSS WWIITTHHIINN EEAACCHH SSEEGGRREEGGAATTEEDD PPAACCKK TTOOGGEETTHHEERR WWIITTHH TTHHEEIIRR SSEEGGRREEGGAATTEEDD PPAACCKK NNUUMMBBEERR..

FF.. PPAACCKKIINNGG::

LLEEVVEELL AA PPAACCKKIINNGG SSHHAALLLL BBEE AACCCCOOMMPPLLIISSHHEEDD UUSSIINNGG WWOOOODD--CCLLEEAATTEEDD PPAANNEELLBBOOAARRDD SSHHIIPPPPIINNGG BBOOXXEESS,, CCOONNFFOORRMMIINNGG TTOO AASSTTMM--DD 66225511,, TTYYPPEE IIIIII,, CCLLAASSSS 22 OORR NNAAIILLEEDD WWOOOODD BBOOXXEESS CCOONNFFOORRMMIINNGG TTOO AASSTTMM--DD

66888800,, CCLLAASSSS 22..

LLEEVVEELL BB PPAACCKKIINNGG SSHHAALLLL BBEE AACCCCOOMMPPLLIISSHHEEDD UUSSIINNGG FFIIBBEERRBBOOAARRDD BBOOXXEESS,, WWEEAATTHHEERR RREESSIISSTTAANNTT,, CCOONNFFOORRMMIINNGG TTOO AASSTTMM--DD 55111188 OORR TTRRIIPPLLEEWWAALLLL,, CCOORRRRUUGGAATTEEDD FFIIBBEERRBBOOAARRDD BBOOXXEESS,, CCLLAASSSS 22,, CCOONNFFOORRMMIINNGG TTOO AASSTTMM--DD 55116688.. CCLLOOSSUURREE,, SSEEAALLIINNGG,, AANNDD RREEIINNFFOORRCCEEMMEENNTT SSHHAALLLL BBEE IIAAWW SSPPEECCIIFFIICC,, AAPPPPLLIICCAABBLLEE MMEETTHHOODDSS OOFF AASSTTMM--DD 11997744,, OORR AASS RREEFFEERREENNCCEEDD IINN TTHHEE CCOONNTTAAIINNEERR SSPPEECCIIFFIICCAATTIIOONN..

WWHHEENN TTOOTTAALL QQUUAANNTTIITTYY TTOO BBEE SSHHIIPPPPEEDD TTOO TTHHEE SSAAMMEE DDEESSTTIINNAATTIIOONN EEXXCCEEEEDDSS 112255 PPOOUUNNDDSS,, EEXXTTEERRIIOORR PPAACCKKSS WWIITTHHOOUUTT SSKKIIDDSS SSHHAALLLL BBEE PPAALLLLEETTIIZZEEDD IINN AACCCCOORRDDAANNCCEE WWIITTHH MMIILL--SSTTDD--114477..

FIGURE 1 – SEGREGATED PACK NUMBER 1 LOCATION IN CONSOLIDATION CONTAINER

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3871997C91 (338X5) LOCK,DRIVE SHAFT 19207 AK15881669

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

FIGURE 2 – CUSHIONING AND SEGREGATED PACK NUMBERS 2 AND 3 LOCATION IN CONSOLIDATION

CONTAINER

SPECIAL PACKAGING INSTRUCTION