Attachment 0001 - Purchase Description.pdf

Purchase Description

1. The following is a list of possible dimensional soft lumber required for PBA.

2. All lumber needs to be #2 or greater with no bark or wane on any edges , no holes in larger than a pencil lead and requires a HT treated stamp on all lumber. All shipments must come with a letter of compliance stating that all lumber meets these requirements and has a HT stamp.

3. The Treated & Softwood Lumber desired may include, but is not limited to:

Dimensional Treated Lumber

1” X 4” 2” X 4” 4” X 4” 1” X 4” 2” X 4” 4” X 4”

1” X 6” 2” X 6” 5” X 5” 1” X 6” 2” X 6” 5” X 5”

1” X 8” 2” X 8” 6” X 6” 1” X 8” 2” X 8” 6” X 6”

1” X 10” 2” X 10” 1” X 10” 2” X 10”

1” X 12" 2” X 12" 1” X 12" 2” X 12"

1” X 4” 2” X 4” 4” X 4” 1” X 4” 2” X 4” 4” X 4”

1” X 6” 2” X 6” 5” X 5” 1” X 6” 2” X 6” 5” X 5”

1” X 8” 2” X 8” 6” X 6” 1” X 8” 2” X 8” 6” X 6”

1” X 10” 2” X 10” 1” X 10” 2” X 10”

1” X 12" 2” X 12" 1” X 12" 2” X 12"

8' Length

12' Length

10' Length

16' Length

Dimensional Softwood Lumber

1” X 4” 2” X 4” 4” X 4” 1” X 4” 2” X 4” 4” X 4”

1” X 6” 2” X 6” 1” X 6” 2” X 6”

1” X 8” 2” X 8” 1” X 8” 2” X 8”

1” X 10” 2” X 10” 1” X 10” 2” X 10”

1” X 12" 2” X 12" 1” X 12" 2” X 12"

1” X 4” 2” X 4” 4” X 4” 1” X 4” 2” X 4” 4” X 4”

1” X 6” 2” X 6” 1” X 6” 2” X 6”

1” X 8” 2” X 8” 1” X 8” 2” X 8”

1” X 10” 2” X 10” 1” X 10” 2” X 10”

1” X 12" 2” X 12" 1” X 12" 2” X 12"

8' Length

12' Length

10' Length

16' Length

4. Plywood is needed in the following sizes:

Ply-Wood Lumber

1/4" bc 1/2" cdx 1/4" ac

3/8" bc 5/8" cdx 3/4" ac

1/2" bc 3/4" cdx 3/4" arrocca

3/4" bc 7/16" wafer board (blandex 3/4" treated

4' X 8' Sheet

5. As per specs of unit to be constructed, on occasion non–dimensional lumber are required to meet specs;

Example: lumber to meet following dimensions: 15/16 x 10in width and 10 foot length. Non-dimensional lumber needs to be #2 or greater with no bark or wane on any edges, no holes in larger than a pencil lead and requires a HT treated stamp on all lumber. All shipments must come with a letter of compliance stating that all lumber meets these requirements and has a HT stamp.

6. All material will be inspected through Governments Quality Assurance (QA) Department. All parts that do not meet the specifications listed per the provided drawing(s) and the MIL-SPEC required in said drawing(s), will be replaced/ repaired by the contractor at their cost to include all shipping cost incurred for the defective parts.

7. Contractor shall provide Certificate of Conformance (COC) and Certified Test Report for all processes indicating contractor compliance with all associated tech data requirements.