Attachment 0001.pdf
PDF 109 KB Posted
- Attached to
- FILLER, WELD (COVERED ELECTRODE) Federal contract opportunity
- Solicitation number
- SPMYM325Q6060
About this file
This document is an Attachment 0001 to a federal solicitation for welding electrodes issued by the Defense Logistics Agency Land and Maritime. The solicitation (SPMYM325Q6060) seeks 5,000 pounds of FILLER, WELD (COVERED ELECTRODE) with specific technical requirements, including a 1/8" outside diameter, 14" length, and MIL-10718-M classification. The procurement is a 100% small business set-aside using Lowest Price Technically Acceptable (LPTA) evaluation criteria, with responses due by June 17, 2025 at 3:00 PM EST.
Key contract specifications include manufacturing in accordance with T9074-BC-GIB-010/0200 Appendix C, requirements for dielectric strength, heat/lot marking, and mandatory quality conformance certification for each lot. Vendors must be registered in the System for Award Management (SAM), provide descriptive literature demonstrating specification compliance, and submit quotes via email to the point of contact, Jannell Moriarty. Payment terms are Net 30 days after material acceptance, with options for Government Commercial Purchase Card or Wide Area Workflow payment methods.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 25Q6060 RFQ Required.docx | DOCX document | |
| Exhibit A.pdf | ||
| T9074-BC-GIB-010 Appendix C.pdf | ||
| Clauses - Full Text Provisions and Clauses 250423.docx | DOCX document | |
| 25Q6060 RFQ Required.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 12/23/2024 ATTACHMENT PAGE
3439 1D1
C DESCRIPTION/SPECIFICATIONS
C.1 MANUFACTURED IN ACCORDANCE WITH T9074-BC-GIB-010/0200 APPENDIX C.
ACQUISITION REQUIREMENTS:
(A) "ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM, HIGH
TENSILE AND HIGHER-STRENGTH LOW ALLOY STEELS", T9074-BC-GIB-010/0200 APPENDIX C
11 DEC 2002
(B) TYPE, SIZE AND LENGTH AND CLASSIFICATION TO BE SPECIFIED IN SECTION B OF THIS SCHEDULE
(C) NOT REQUIRED
(D) NOT REQUIRED
(E) MAXIMUM CHROMIUM CONTANT OF FOOTNOTE 4 OF TABLE 1 APPLIES
(F) NOT APPLICABLE
(G) ELECTRODES SHALL HAVE A DIELECTRIC STRENGTH OTHER THAN A DIAELECTRIC STRENGTH
ABLE TO INSULATE AGAINST 110 VOLTS, 60-HZ ALTERNATING CURRENT (SEE C.3.4.7 OF TECH PUB)
(H) HEAT, LOT, OR OTHER MARKING CODES ARE REQUIRED FOR INDIVIDUAL
ELECTRODES (SEE C.3.5 OF TECH PUB)
(I) NOT REQUIRED
(J) NOT APPLICABLE
(K) NOT REQUIRED
(L) NOT REQUIRED
(M) NOT REQUIRED
(N) NOT APPLICABLE
C.2. MATERIAL DESCRIBED BY A STOCK NUMBER SHALL BE FURNISHED FROM ONE LOT EXCEPT WHEN PROHIBITED BY NORMAL MANUFACTURING PROCEDURES, IN WHICH CASE, THE CONTRACTOR SHALL
LIMIT, TO THE MAXIMUM EXTENT POSSIBLE, THE NUMBER OF LOTS OFFERED FOR DELIVERY.
C.3. DATA REQUIRMENTS
C.3.1 CERT. OF QUALITY CONF (N/PROP) SEE EXHIBIT A. SEQUENCE A001
ONE COMPLETED COPY OF A CERTIFICATION OF QUALITY CONFORMANCE TEST IAW PARAGRAPH
C.4.4 OF NAVSEA T9074-BC-GIB-010/0200 APPENDIX C SHALL BE FORWARDED FOR EACH LOT THAT
IS INCLUDED IN THE SHIPMENT. THE CERTIFICATION OF QUALITY CONFORMANCE SHALL BE
SIGNED AND DATED BY A DESIGNATION VENDOR OFFICIAL.
C.3.2 SPECIAL EMPHASIS C OF C SEE EXHIBIT A SEQUENCE A002
C.4 C524 MARKING & CERTIFICATION REQUIREMENTS FOR CIM
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
ITEM NO.
STOCK NUMBER
3439-LL-DM1-0541
SPECIAL CHARACTERISTICS
OUTSIDE DIAMETER: 1/8"
LENGTH: 14"
CLASSIFICATION: MIL-10718-M
SPEC: T9074-BC-GIB-010/0200 APPENDIX C
ITEM NAME FILLER, WELD (COVERED ELECTRODE)
SECTION B
SMIC
3j
SPMYM325Q6060
0001 1/2
CONTRACT
PRINTED 12/23/2024 ATTACHMENT PAGE
3439 1D1
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
E.2 E2 INSPECTION AND ACCEPTANCE (DESTINATION)
E.3 E504 NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD
H SPECIAL PROVISIONS
K Section
L Section
M Section
2/2
SPMYM325Q6060
File details come from the government source that posted it. Updated .