Attachement 2 Salient Characteristics.docx

Weedtechnics SATUSTEAM SW800 or EQUAL Steamer:

Essential Characteristics:

Heat: 247 ◦F Generator Pressure: 1000 psi Nozzle Pressure: 60 psi Water Tank Capacity: minimum 250 gallons Diesel Generator Run Time: 8-10 hours (or more) Water Usage Electrical Motor & Pump Diesel Burner Weight: 305 to 500 pounds Hose Length: 100 feet

Shall include the following:

· SW800 Unit (or equal) to include the generator and pressurization pump up to 1000 psi, hot water heat exchanger up to 245 F◦F

· Double insulated hose up to 100 feet (with jackets)

· Base Mount Reel

· Depressurization restrictor nozzle and chamber with deduction down to 60 psi

· Water Reservoir tank up to 2570 gallons

· Applicator heads (60, 35 and 10 VCH hoods, open head versitech, spike head versitech, and pressure nozzzles).

· Cool touch lance (wand cover)

· Nozzle Wheel Kit

· Equipment training and maintenance package

· Compatible trailer with vehicle hitch and brakes

· Required packing or shipping materials

· Emergency Stop Button, Blade Start Button, and Blade Stop Button

· Blade Guard and Tension control device IAW OSHA 1910.213

· Work holding jaw with handles

· Work holding vice to fit table “T” slots

· Magnetic wand chip remover

· Flood coolant

· Work Light

· Chip Box

· Chip Blower

· Saw Blade Guards

· Band Mist Lubricator

· Table Feed Control

· Post Elevating Hand Wheel required to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Assists with minimizing blade deflection and increasing band life and safety

· Tool saver lubricant stick

· 5-gallon pail of mist coolant (and/or any other fluid necessary for start-up)

· Option for extended warranty on the machine (10 year)

Materials to be cut:

· Primary: aluminum

· Secondary: Steel, wood and plexiglass

Size of material to be cut:

· Up to ½ inch thick. Will need to be capable of cutting L angles

Delivery Address:

· 911th Airlift Wing 2601 Defense Ave Building 333 Coraopolis, PA 15108

Unloading of bandsaw:

· Government is responsible for using forklift/material handling equipment to offload bandsaw and movement to the installation point

Bandsaw leveling:

· There is a slight slope in the floor. Contractor responsible for ensuring band saw is level

Installation:

Government responsible for making bandsaw electrical connection. Vendor responsible for initial start-up

TrainiTraining:

· Vendor to provide training package in-person training on proper use of equipment. bandsaw to audience of up to seven. Test cuts shall be performed during training with material provided by the government.

Disposal of packaging/misc waste:

Government to dispose of packaging material