ATTACH-DATA_ITEM_DESCRIPTION.pdf
PDF 20 KB Posted
- Attached to
- Liner, Combustion, Chamber Federal contract opportunity
- Solicitation number
- FA812125Q0004
About this file
This is a Data Item Description (DID) document numbered DI-NDTI-81307A that establishes requirements for First Article Qualification Test Plan and Procedures. The document was approved on November 21, 2006, and is used to define how contractors should prepare test procedures, test equipment specifications, and inspection criteria for first article qualification testing.
The DID requires contractors to submit test plans in their own format that must include: purpose of test, applicable documents, description of units to be tested, detailed test descriptions with step-by-step procedures, equipment specifications including commercial identifications, drawings/schematics of non-commercial test fixtures, and inspection criteria defining minimum performance requirements. The inspection criteria must specifically address worst-case scenarios for power input, signal levels, and timing inputs/outputs. This DID supersedes the previous version DI-NDTI-81307.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Transportation Data Report.pdf | ||
| Item Description.pdf | ||
| Packaging Requirement.pdf | ||
| FA8121-25-Q-0004.pdf | ||
| 3991556_CDRL1_REPORT.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .