Attach_11_IUID.pdf
PDF 64 KB Posted
- Attached to
- F-16 Circuit Card Assy 5998-01-653-6192 WF (5EA)
- Solicitation number
- FA8212-24-Q-0010
About this file
This document is an IUID (Item Unique Identification) Checklist that outlines the requirements and expectations for IUID marking on a specific circuit card assembly identified by NSN 5998-01-653-6192 WF. The checklist provides details on the item, including the CAGE code, part number, and serial number, as well as the recommended marking instructions. It specifies that the IUID marking must be permanent and comply with MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418 standards. The IUID matrix must be highly visible and easily accessible. Additionally, the checklist indicates that the circuit card assembly is an embedded item for the NSN listed.
The related federal contract opportunity is a pre-solicitation (Solicitation Number FA8212-24-Q-0010) for the procurement of 5 units of the F-16 Circuit Card Assembly 5998-01-653-6192 WF. The contracting agency is the Department of the Air Force Materiel Command Air Force Sustainment Center.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
5998016536192WF
VERSION NUMBER
NOUN
CIRCUIT CARD ASSEMB
INITIATOR
Allred, Justin M
ORGANIZATION CODE / OFFICE SYMBOL
416 SCMS / GUEAA
COMMERCIAL PHONE
801-775-4528
DSN PHONE
775-4528
CAGE / REFERENCE NUMBER
05924 / 205-4401 35012 / 187218-001
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Data Label
MARKING METHOD
Ink Jet
DESCRIPTION / LOCATION
IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with. Contractors drawings shall be changed or supplemented by contractor for IUID compliance. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equipped to read barcode). IUID Matrix needs to be highly visible, in a location easily accessible. IUID marking must be permanent. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008). IUID Marking to include CAGE (17V), P/N (1P), and Serial Number (IS).
REMARKS
ATTACHMENT(S)
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 5998016536192WF
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
ATTACHMENT(S)
Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 05 Dec 2023
File details come from the government source that posted it. Updated .