Attach 1_Spec and Vehicle Breakdown Pictures.pdf

Specification Sheet

Must have minimums:

Trucks – 11 Total (3 - Ford F250s, 5 - Chevy 2500s, and 3 - Dodge Ram 1500s)

48” roof mounted 360 degree visibility RED/BLUE rotating light bars w/ takedowns and alley lights and amber traffic advisor lights

2 – Grill Mounted 4 inch 12 LED 2 Color Red/BLUE Strobe lights

2 – Surface Mounted (Between Tailgate and Bumper - Lights shall not infringe on tailgate opening and closing) 12 LED 2 Color Red/Blue Strobe Lights

2 – Side Mirror Under-Mounted 180 degree LED Red/Blue Strobe

100W siren speaker mounted under the hood

PA system mounted in conjunction to lights and siren system

Mounted Control or switch panel for lights and sirens – No Hand Held Remote

All wiring required for installation of lights and sirens hidden and protected.

Metal box - hinged and keyed enclosure to protect wiring located under rear seat of trucks

Installation / Labor

*Please work with the customer on vehicle ergonomics and location of equipment

*See pictures below for reference

Graphic Decals IAW TO 36-1-91 PARA 2.80.3:

2.80.3 Marking Security Forces Pickup Trucks. Security

Forces pickup trucks (2-door and 4-door) used for security duties shall be marked as follows:

The text “Police” with the Security Forces badge decal alongside of the text closest to the front of the vehicle will be centered between the front wheel well and the rear of the main cabin. All markings will be made using a temporary adhesive type material (example: magnetic or 3M vinyl), easily removable without damaging painted surfaces. Security Forces badges will be on a white or olive drab background, depending on vehicle color and local requirements. Markings must be uniform as described below and illustrated in Figure 2-35.

• Blue stripe will start midway above the front tire and curve over the back tire ending at least 5 inches away from the rear light. The beginning of the stripe will measure 5 inches wide and taper to 2.5 inches when curving over the rear wheel. Blue stripe will be positioned under the door handles and run parallel with the natural body lines of the vehicle.

• “Dial 9-1-1” Text Size: 4 inches letters and align with the end of the stripe at the rear light.

• Security Forces Badge Size: 11 inches tall

• “Police” Text - Sides: 11 inches letters

• “Police” Text - Rear: 7 inches letters

Font-Faces:

• “Dial 9-1-1” Text - TW Cen MT Condensed

• “Police” Text - Bolt Bold

Color:

• “Police” text background and “Dial 9-1-1” text will be: Dark Navy Blue, Pantone 282 C or a color of similar hue and value

• Striping: 3mm reflective blue (3M 680CR or similar vinyl stock with the same color key)

• “Police” text: 3mm reflective white (#680CR-10) or a color of similar hue and value

• Security Forces Badge: 3mm reflective white (#680CR-10) or a color of similar hue and value

HMMWVs - 23 Total

100W siren speaker mounted under the hood

2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both top corners of windshield at 45 degree angle. Bracket is needed and painted to match HMMWV color.

2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on the top corners on the rear hatch

2 - 2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both sides of rear hatch above Security Forces Decal.

Switch panel for lights and sirens.

All wiring required for installation of lights and sirens hidden and protected.

Installation / Labor.

*See pictures below for Details

The vehicles will be delivered and retrieved from the contractor’s facility by the Government if the facility is within one hour of the Albuquerque/Kirtland Air Force Base area. Outside of that range, the contractor shall arrange for transport of the vehicle in such a way as to not add mileage to the vehicle.

* Metal box - hinged and keyed enclosure to protect wiring located under rear seat of trucks

*Metal box - hinged and keyed enclosure to protect wiring located under rear seat of trucks

*2 – Grill Mounted 4 inch 12 LED 2 Color Red/BLUE Strobe lights

*2 – Side Mirror Under-Mounted 180 degree LED Red/Blue Strobe

*2 – Surface Mounted (Between Tailgate and Bumper - Lights shall not infringe on tailgate opening and closing) 12 LED

2 Color Red/Blue Strobe Lights

*2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both top corners of windshield at 45 degree angle. Bracket is needed and painted to match HMMWV color.

*2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both top corners of windshield at 45 degree angle. Bracket is needed and painted to match HMMWV color.

**2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both top corners of windshield at 45 degree angle. Bracket is needed and painted to match HMMWV color.

**2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both top corners of windshield at 45 degree angle. Bracket is needed and painted to match HMMWV color.

*2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on the top corners on the rear hatch

*2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on the top corners on the rear hatch

*2 - 2 - 4 inch 12 LED 2 Color Red/BLUE Strobe lights mounted on both sides of rear hatch above Security Forces Decal.

*Side view

*Angled view picture