Attach-1-SOW.pdf

Fuel Island Painting Proposal

Anahuac NWR

July 26, 2021

REQUIREMENTS

The Anahuac NWR at Winnie Depot is wanting to wash, clean rusted areas, and treat rusted areas then paint all structural steel that is on the fuel island. The structural steel needs to be treated in the rusted areas with Macropoxy Primair and then painted with an industrial grade reddish paint.(color of paint will be pick at start of job)

Requirements need to meet the following criteria:

Scope of Work:

• Set up materials and equipment on-site

• Power wash existing red oxide structural steel to remove loose dirt, grime, film, and any other surface grit

• Spot blast, sand, grind, or wire brush rusted areas, sand and grind with wire wheels and grinding wheels as needed to remove loose rust and paint

• Apply Sherwin Williams Macropoxy (or like) 646 fast cure two component high solids epoxy mastic to spot prime rusted areas as needed

• Apply a coat of Sherwin Williams Pro Industrial Pro-Cryl Red Oxide (or like) to match existing color

• Remove and haul off all excess waste from the facility on work performed by contractor.

Work will be performed at :

Winnie Depot 1035 W. Buccaneer Drive Winnie TX. 77665

For a site visit or SOW questions, please contact:

Steve Baker 409-284-9459 email steve_baker@fws.gov or Kristin Fritz 409 267-3337 ext 123 email kristin_fritz@fws.gov

End.

mailto:steve_baker@fws.gov mailto:kristin_fritz@fws.gov