Attach 1 Salient Characteristics - Wideband Test Sets 20220823.pdf

SALIENT CHARACTERISTICS

Requirement:

30th Space Communications Squadron (SCS) requires four (4) test sets capable of testing Dense Wave Division Multiplexing (DWDM) circuit paths for Vandenberg Space Force Base (VSFB). These are needed as part of the 30th SCS DWDM installation project and for future maintenance of circuits traversing this network.

The 4 test sets must have the following Salient Characteristics (required capabilities):

• The following items are needed for our current system o Unframed Testing (CPRI) o OTN testing for OTU-2, OTU-2, OTU-1e/OTU-2e o SONET testing for OC_1/3/12/48 and OC-192 o DSN testing at DS1/E1/DS3/D53 Rx Bert o Non-intrusive Pulse Mask of DS1, DS3, and E1, E3 rates o Optical Power, Electrical level and frequency measurements o Round trip delay on all interfaces o Single 10GE LAN/WAN XFP, Dual base 1000Base-X SFP Dual 10/100/1000T RJ45 and

100Base- X with media convertor o 1G/2G/4G/8G/10G Fiber Channel Support o V-SAM test suite compliant o IPv4 and IPv6 traffic Generation o Throughput, latency, frame loss, and back-to-back tests o VLAN scan and traffic monitor o BER Testing at unframed Layer 1, Layer 2, Layer 3 and Layer 4 o LC fiber optic connection type o 1310 nm and 1550 nm fiber interfaces o Cannot be larger 12” w x 6” H x 3” D o Needs Ac power adapter o Display can not be smaller then 7” o Display needs to be touch screen full color o Must survive a 1-meter drop test o Must have a system memory no smaller that 128Mb RAM