Att_2_Specifications.pdf

FA282321Q4019 – Attachment 2 - Specifications

Specifications

1. The Government requests delivery of Farm Tractors with Rotary Mower Packages to Eglin AFB, Duke Field.

796 CES/CEORP

Building 3031 Clay Street. (Duke Field) Eglin AFB, FL. 32542

Government Points of Contact will be provided after the contract is awarded.

2. The vender shall call Government Point(s) of Contact to schedule delivery during the hours of (0645 to 1630) not later than one business day in advance of anticipated delivery. At which time, the Government will provide the exact location for that particular delivery. Upon delivery, a certified sales representative will be present on site to provide hands on training and set up and operational instruction to Government personal at no addition cost to the government. This is a hard requirement, no exceptions.

3. The Government is requesting a 55 horse power Farm Tractor or equal with loader ready capabilities and enclosed cab. Package will include flex wing rotary mower and forestry package.

These are the minimal requirements that the Government is willing to accept in order to successfully complete these projected projects within the time and budget that has been allotted.

Equipment horse power, size, Cab and A/C, Equipment weight, 15 foot rotary mower, and forestry package.

1. A minimum of 55 engine horse power an increase of 5 HP is acceptable, anything over 60 horse power is unacceptable. This is a hard requirement, no exceptions. Engine exhaust pipe should be located behind the cab A-post pillar for an unobstructed view through the front window. This is a hard requirement, no exceptions. The fuel capacity needs to be 21 gallons or greater.

2. A minimum of 51 HP or grater at the tractor output for the independent /ground speed 540 PTO. This machine will operate a Rhino 3150, 15 foot flex-wing rotary cutter or equal. The tractor must be able to operate the 15 foot flex wing rotary mower, anything less will render this machine useless for this application. This is a hard requirement, no exceptions.

3. Enclosed cab with A/C and heat with additional heating and cooling vents, rear windshield wiper, rear floor mat, and factory installed radio. This is a hard requirement, no exceptions.

4. The tractor needs to be equipped with hydraulic valves in the front and remote hydraulic valves in the rear. This a hard requirement, no exceptions.

5. The 3 point hitch must be CAT II and have a lifting capacity of 4,000 pounds or greater. This a hard requirement, no exceptions.

FA282321Q4019 – Attachment 2 - Specifications

6. The tractor must come with a front loader valve and joystick. This a hard requirement, no exceptions.

7. The tractor shall be four wheel drive synchro shuttle transmission with aggressive rough terrain tires for cutting on steep slopes or terrain. Tire size rear: 16.9 x 29, 6PR, Tl, R-1 (AG), front: 9.5 x 20 6PR, TL, R-1 (AG).

8. Complete installed forestry protection package that is made to fit around and under the mower to protect the operator and tractor from debris during mowing operations.

This a hard requirement, no exceptions. A loader bucket can be used as part of the forestry package to protect the front of the tractor.

9. Forestry package must have full length bottom guards, rear screen with access door, side screen, perimeter guards and heavy duty front bumper (loader bucket attachment can be subbed for the bumper guard). This a hard requirement, no exceptions.

10. The rotary deck will be a 15 foot flex wing mower. Anything less than 15 foot is unacceptable. This is a hard requirement, no exceptions.

11. Rotary mower deck must be 10GA on the decking or better and 540 RPM PTO with 1-3/8 6 spline drive line. This is a hard requirement, no exceptions.

12. Mower deck must have six 25.6” x 7” x 18”; 6 tires (4 center, 2 wing) foam filled tires low profile Rhino Trax type or equivalent. Deck will have standard pivoting hitch, and single chain guards. This is a hard requirement, no exceptions.

13. Rotary deck must be capable of cutting 2-3 inch in diameter brush or better and the blade carrier must made of cast and dog bone shaped. This is a hard requirement, no exceptions.

14. Paint color on the rotary deck will be painted to match the tractor acquired.