Att 2 SOW.pdf

STATEMENT OF WORK

FOR

Instron Model 1332 Biaxial Test Frame Actuator Repair

EGLIN AFB

27 April 2023

STATEMENT OF WORK

FOR

Instron Model 1332 Biaxial Test Frame Actuator Repair

1.0 INTODUCTION/OVERVIEW

1.1 BACKGROUND

Our modeling and simulation section has an urgent need to characterize a large quantity of various materials to develop their fracture prediction capabilities. For the models to be valid they must be updated and improved using results of actual experiments. This Instron Model 1332 Biaxial machine will perform the shear testing necessary for populating these fracture models.

1.2 SCOPE

To achieve a fully operational biaxial machine capable of performing the testing needed to do our materials characterization work.

2.0 REQUIREMENTS

2.1 TASKS

The contractor shall provide all management, parts, tools, supplies, equipment, and labor necessary to perform all tasks related to the repair of the biaxial servo hydraulic test frame and shall be familiar with all operating and safety precautions associated with servicing the biaxial test frame.

2.1.1 The contractor shall disconnect the hydraulic lines and all other necessary items and remove the actuator from the Instron Model 1332 biaxial test frame.

2.1.2 The contractor shall disassemble the actuator and replace all seals.

2.1.3 The contractor shall reassemble the actuator and reinstall the actuator back into the Instron Model 1332 biaxial test frame.

2.1.4 The contractor shall connect all hydraulic lines and previously removed items back to the test frame, turn-on system, check for leaks and operate system to its full capacity to verify everything is operational.

2.1.5 Unless notified by the Contracting Officer, and properly modified into the contract, no additional parts or services not covered under the resultant contract to be provided to the Government.

2.2 SCHEDULE

2.2.1 The contractor shall coordinate with the Authorized Government Representative (AGR) to schedule the start date of the repair work on the Instron Model 1332 biaxial test frame within 90 days of the contract award.

2.2.2 The hours of operation are Monday through Friday 0730 – 1700.

2.2.3 All work performed by the contractor will be located inside building 9624 and 9625.

3.0 GOVERNMENT FURNISHED PROPERTY

3.1 The government will provide the hydraulic oil to top off the hydraulic supply tank once the repairs are complete.

4.0 SECURITY REQUIREMENTS

4.1 The contractor shall provide the government the names, phone numbers and email addresses of the qualified personnel that will be performing the repair of the Instron Model 1332 biaxial servo hydraulic test frame. The contractor will use the call box at range gate to get verification, when gate opens proceed to building 9620 to sign-in and receive a visitor’s badge. The contractor will then be escorted to building 9624.

4.2 Contractor employees will be denied access to the base if they have been convicted of 2 misdemeanors within five years or any felony within 10 years. If a contractor employee has any convictions and has not coordinated with the contracting office in advance prior to incurring costs to fulfill contract requirements, the Government shall not be responsible for payment of any incurred costs.

STATEMENT OF WORK