ATT -2 SON Vault Regulators.pdf
PDF 132 KB Posted
- Attached to
- Vault Regulators Single Source Justification
- Solicitation number
- FA302224Q0307
About this file
This document is a Statement of Need (SON) that describes the requirement to replace two Constant Current Regulators feeding airfield lights at Columbus AFB, MS. The SON specifies that the replacement regulators must be Eaton Crouse-Hinds products, with one unit to power a 3-step system for the inside runway threshold lights, and the other unit to power a 5-step system for the outside runway threshold lights. Both units are required to be 480V, 15kW, 6.6A. The contractor is responsible for providing the regulators and any applicable manufacturer's warranty, while the Government will coordinate base access. The delivery schedule requires the units to be delivered as soon as possible to Columbus AFB.
The related federal contract opportunity is a single-source solicitation for the two Constant Current Regulators, with justification that Global Access Supply is the sole distributor of the required Crouse-Hinds products. The solicitation number is FA302224Q0307.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ATT -1 Combo Vault Regulators.pdf | ||
| ATT -4 Single Source Justification (Redacted).pdf | ||
| ATT -3 Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF NEED
Replace Constant Current Regulators, Bldg. 836
1. SCOPE. Provide all material, equipment and transportation required for the purchase and delivery of two Constant Current Regulators feeding airfield lights located at Columbus AFB, MS. Both units are required to be Eaton Crouse‐Hinds products rated at 480 Volt, 15 kilowatt with an output of 6.6
Amperes. The first unit is required to be for a 3‐step system to power the threshold lights on the inside runway. The second unit is required to be for a 5‐step system powering the threshold lights on the outside runway.
2. REQUIREMENTS. The contractor shall furnish all labor, materials, equipment, supplies, and supervision needed to accomplish the tasks described in this statement of need. Under the provisions of the statement of work, the contractor shall accomplish the tasks described below.
3. DELIVERABLES & RESPONSIBILITIES. The contractor is responsible for the following:
82960PRL‐480‐15‐3‐P PRO PWR CCR (Qty. 1)
82960PRL‐480‐15‐5‐P PRO PWR CCR (Qty. 1)
The contractor shall provide any manufacturer’s warranty to the Government.
The Government is responsible for the following:
Coordinating base access privileges with the appropriate base‐level authorities.
4. SCHEDULE. The contractor shall delivery as soon as possible to Columbus Air Force Base
END OF SECTION
File details come from the government source that posted it. Updated .