Att 12 - Revised Model Contract.pdf

AWARD / CONTRACT

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

RATING

DO-A1

PAGE of PAGES

1 16

2. CONTRACT (PROC. INST. IDENT.) NO. 3. EFFECTIVE DATE 4. REQUISITION / PURCHASE REQUEST / PROJECT NO.

FA8650-23-D-5400 See Section G

5. ISSUED BY AFRL/RXKMA CODE FA8650 6. ADMINISTERED BY (IF OTHER THAN ITEM 5) CODE S3605A

USAF/AFMC

AFRL WRIGHT RESEARCH SITE

2130 EIGHTH STREET BUILDING 45

WRIGHT-PATTERSON AFB OH 45433-7541

LORIE A. WALTHER 937-713-5648

LORIE.WALTHER.2@US.AFMIL

DCMA DAYTON

1725 VAN PATTON DR AREA A BLDG 30

WRIGHT-PATTERSON AFB, OH 45433

DCMA.LEE.HQ.LIST.S3605A-CASD

@MAIL.MIL

SCD: C PAS: (NONE)

7. NAME AND ADDRESS OF CONTRACTOR (NO., STREET, CITY, COUNTY, STATE AND ZIP CODE)

8. DELIVERY

FOB Origin Other (see below)

9. DISCOUNT FOR PROMPT PAYMENT

N

10. SUBMIT INVOICES

(4 COPIES UNLESS OTHERWISE

SPECIFIED) TO

ITEM

See Block

12 CAGE CODE FACILITY CODE THE ADDRESS SHOWN IN

11. SHIP TO / MARK FOR CODE 12. PAYMENT WILL BE MADE BY CODE HQ0337

See Section F

DFAS COLUMBUS CENTER

DFAS-CO/NORTH ENTITLEMENT OPS

P.O. BOX 182266

COLUMBUS, OH 43218-2266

EFT: T

13. AUTHORITY FOR OTHER THAN FULL AND OPEN COMPETITION 14. ACCOUNTING AND APPROPRIATION DATA

15A. ITEM NO 15B. SUPPLIES/SERVICES 15C. QUANTITY 15D. UNIT 15E. UNIT PRICE 15F. AMOUNT

See Section B

15G. TOTAL AMOUNT OF CONTRACT $0.00

16. Table of Contents

SEC DESCRIPTION PAGE(S) SEC DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM 1 I CONTRACT CLAUSES 14

B SUPPLIES OR SERVICES AND PRICES/COSTS 2 PART III - LIST OF DOCUMENTS, EXHIBITS & ATTACHMENTS

C DESCRIPTION/SPECS./WORK STATEMENT 8 J LIST OF ATTACHMENTS 16

D PACKAGING AND MARKING 9 PART IV - REPRESENTATIONS AND INSTRUCTIONS

E INSPECTION AND ACCEPTANCE 10 K REPRESENTATIONS, CERTIFICATIONS

F DELIVERIES OR PERFORMANCE 11 OTHER STATEMENTS OF OFFERORS

G CONTRACT ADMINISTRATION DATA 12 L INSTRS., CONDS., AND NOTICES TO

H SPECIAL CONTRACT REQUIREMENTS 13 M EVALUATION FACTORS FOR AWARD

CONTRACTING OFFICER WILL COMPLETE ITEM 17 OR 18 AS APPLICABLE

17. 18. Award (Contractor is not required to sign this document).

(Contractor is required to sign this document and return 1 copies to issuing office).

Contractor agrees to furnish and deliver all items or perform all services set forth or otherwise identified above and on any continuation sheets for the consideration stated herein. The rights and obligations of the parties to this contract shall be subject to and governed by the following documents: (a) this award/contract, (b) the solicitation, if any, and (c) such provisions, representations, certifications, and specifications, as are attached or incorporated by reference herein. (Attachments are listed herein.)

Your offer on solicitation number including the additions or changes made by you which additions or changes set forth in full above, is hereby accepted as to items listed above and on any continuation sheets. This award consummates the solicitation and your offer, and (b) this award/contract. No further contractual document is necessary.

19A. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 20A. NAME OF CONTRACTING OFFICER

MARK A. WADE

19B. Name of Contractor 19C. Date Signed 20B. United States of America

20C. Date Signed by _________________________________ (signature of person authorized to sign) by ____________________________________ (signature of Contracting Officer)

NSN 7540-01-152-8069 STANDARD FORM 26 (Rev 4-85) Previous Editions unusable Prescribed by GSA FAR (48 CFR) 53.214(a) ConWrite Version 7.7.2500 Created 06 Jan 2023 12:26 PM

This model contract does not represent the final contract and in no way binds the Government to any of the terms.

PART I - THE SCHEDULE

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

SECTION B FA8650-23-D-5400

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

RESEARCH AND DEVELOPMENT

Noun: RESEARCH AND DEVELOPMENT

PSC: AC12

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

Conduct research in accordance with the Statement of Work (SOW), entitl for Integrated Nano- 2022, Section J, Attachment 1, attached hereto. Deliver data in accordance with Section

23-1, dated 23 Aug 2022.

ESTIMATED COST: TO BE DETERMINED ON EACH TASK ORDER

FIXED FEE: TO BE DETERMINED ON EACH TASK ORDER

Pursuant to FAR 52.232-for payment and allotted to this contract for CLIN(s) TO BE DETERMINED ON EACH TASK ORDER. It is estimated that his amount is sufficient to cover performance through

TO BE DETERMINED ON EACH TASK ORER.

HARDWARE

Noun: HARDWARE

PSC: AC12

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall deliver hardware in accordance with the Statement of Work (SOW), -electronic and Optoelectronic Structures shall deliver any and all hardware developed and/or acquired during the course of this program. Hardware deliverables shall be determined on each Task Order (if applicable).

In accordance with DFARS Clause 252.211- Valuatio - -the contractor shall identify the unit acquisition cost for all deliverable end items for which item unique identification applies.

All costs associated with this CLIN are accounted for under CLIN 0001.

SOFTWARE

Noun: SOFTWARE

PSC: AC12

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall deliver software in accordance with the Statement of Work (SOW), -electronic and Optoelectronic Structures ttached hereto.

The contractor shall deliver software in accordance with Section J, Exhibit A, entitled, -1, dated 23 Aug 2022.

Computer software deliverables, include but are not limited to the following, shall be Determined on each Task Order (if applicable).

All costs associated with this CLIN are accounted for under CLIN 0001.

SAMPLES, PROTOTYPES, TEST ARTICLES & RESIDUAL MAT

Noun: TEST SAMPLES & RESIDUAL MATERIALS

PSC: AC13

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall deliver samples, specialized test equipment, prototypes, test articles and residual materials in accordance with the Statement of Work (SOW), entitled

-electronic and Opto 26 Aug 2022, Section J, Attachment 1, attached hereto.

The contractor shall deliver samples, prototypes, test articles and residual materials in accordance with Section J, Exhibit A, entitled, Contract Data Requireme Form 1423-1, dated 23 Aug 2022.

SYSTEM DEVELOPMENT & DEMONSTRATION

0005 OPTION CLIN

Noun: SYSTEM DEVELOPMENT & DEMONSTRATION (RDT&E

FUNDING BA 6.5)

PSC: AC13

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

To be determined on each Task Order.

RESEARCH, DEVEOPMENT, TESTING & EVALUATION MGT SPT

0006 OPTION CLIN

Noun: RDT&E MANAGEMENT SUPPORT (RDT&E BA 6.6)

PSC: AC13

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

RDT&E Operational System Development(RDT&E BA 6.7)

0007 OPTION CLIN

Noun: OPERATIONAL SYSTEM DEVELOPMENT (RDT&E BA 6.7)

PSC: AC13

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Firm Fixed Price - TBD

Noun: CONTRACTOR ACQUIRED PROPERTY (CAP)

PSC: AC13

NSN: N - Not Applicable Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall deliver any and all Contractor Acquired Property (CAP) developed and/or acquired via the course of this effort. CAP deliverables, include, but are not limited to the following: To be cited on individual orders.

In accordance with DFARS Clause 252.211-7003. "Item Unique Identification and Valuation", the contractor shall identify the unit price for all deliverable end items for which item unique identification applies.

This CLIN is not separately priced, and all costs for this CLIN are accounted for under CLIN 0001 of each Task Order.

Noun: RESEARCH & DEVELOPMENT (3600 FUNDED) - TIME AND

MATERIALS (TBD)

PSC: AC12

NSN: N - Not Applicable Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

To be determined at the Task Order level.

ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

FIRM FIXED PRICE (TBD)

Noun: RESEARCH & DEVELOPMENT (3600 FUNDED) - FIRM

FIXED PRICE (TBD)

PSC: AC13

NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

NO CLAUSES OR PROVISIONS IN THIS SECTION

SECTION C - DESCRIPTION/SPECS./WORK STATEMENT

SECTION C FA8650-23-D-5400

SECTION D - PACKAGING AND MARKING

SECTION D FA8650-23-D-5400

SECTION E - INSPECTION AND ACCEPTANCE

SECTION E FA8650-23-D-5400

SECTION F - DELIVERIES OR PERFORMANCE

SECTION F FA8650-23-D-5400

SECTION G - CONTRACT ADMINISTRATION DATA

SECTION G FA8650-23-D-5400

SECTION H - SPECIAL CONTRACT REQUIREMENTS

SECTION H FA8650-23-D-5400

PART II - CONTRACT CLAUSES

SECTION I - CONTRACT CLAUSES

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

Contract Clauses in this section are from the FAR, Defense FAR Sup, Air Force FAR Sup, and the Air Force Materiel Command FAR Sup, and are current through the following updates:

Database_Version: 6.15 x 300; Issued: 8/26/2016; FAR: FAC 2005-89; DFAR: DPM20160802; DL.: SL 98-021;

Class Deviations: CD 2016-O0008; AFFAR: 2002 Edition; AFAC: AFAC 2016-0603; IPN: 98-009

I. NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.202-01 DEFINITIONS (NOV 2013)

52.203-03 GRATUITIES (APR 1984)

52.203-05 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

52.203-06 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

52.203-07 ANTI-KICKBACK PROCEDURES (MAY 2014)

52.203-08 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO

INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (APR 2014)

52.204-04 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT

PAPER (MAY 2011)

52.204-09 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (JUL 2013)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

52.209-09 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY

MATTERS (JUL 2013)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

52.210-01 MARKET RESEARCH (APR 2011)

52.211-05 MATERIAL REQUIREMENTS (AUG 2000)

52.215-02 AUDIT AND RECORDS -- NEGOTIATION (OCT 2010)

52.215-08 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA (AUG

2011)

52.215-11 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA--

MODIFICATIONS (AUG 2011)

52.215-13 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA--MODIFICATIONS (OCT

2010)

52.215-14 INTEGRITY OF UNIT PRICES (OCT 2010)

52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)

52.215-17 WAIVER OF FACILITIES CAPITAL COST OF MONEY (OCT 1997)

52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS

(PRB) OTHER THAN PENSIONS (JUL 2005)

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS (OCT 2010)

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (OCT 2009)

52.216-07 ALLOWABLE COST AND PAYMENT (JUN 2013)

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

52.216-08 FIXED FEE (JUN 2011)

Applies to Cost-Plus-Fixed-Fee CLIN(s) only.

52.216-18 ORDERING (OCT 1995)

Para (a), Issued from date is '***DATE OF CONTRACT AWARD***' Para (a), Issued through date is '***60 MONTHS AFTER CONTRACT AWARD***'

52.216-22 INDEFINITE QUANTITY (OCT 1995)

Para (d), Date is '72 months after effective date of the basic contract'

52.219-08 UTILIZATION OF SMALL BUSINESS CONCERNS (OCT 2014)

52.219-16 LIQUIDATED DAMAGES -- SUBCONTRACTING PLAN (JAN 1999)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

52.222-02 PAYMENT FOR OVERTIME PREMIUMS (JUL 1990)

Para (a), Dollar amount is '$0.00'

52.222-03 CONVICT LABOR (JUN 2003)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015)

52.222-26 EQUAL OPPORTUNITY (APR 2015)

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2016)

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS

ACT (DEC 2010)

52.222-50 COMBATING TRAFFICKING IN PERSONS (MAR 2015)

52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (OCT 2015)

52.223-03 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN

1997) Para (b), Material Identification No: '***TBD BY INDIVIDUAL TASK ORDER***'

52.223-06 DRUG-FREE WORKPLACE (MAY 2001)

52.223-07 NOTICE OF RADIOACTIVE MATERIALS (JAN 1997)

Para (a), Number of days is '30'

52.223-10 WASTE REDUCTION PROGRAM (MAY 2011)

52.223-15 ENERGY EFFICIENCY IN ENERGY-CONSUMING PRODUCTS (DEC 2007)

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

52.223-19 COMPLIANCE WITH ENVIRONMENTAL MANAGEMENT SYSTEMS (MAY 2011)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

52.227-01 AUTHORIZATION AND CONSENT (DEC 2007) - ALTERNATE I (APR 1984)

52.227-02 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (DEC 2007)

52.227-11 PATENT RIGHTS - OWNERSHIP BY THE CONTRACTOR (MAY 2014)

Para (j), Communications: 'See Attachment 1A, SOW Supplemental Requirements'

52.228-07 INSURANCE -- LIABILITY TO THIRD PERSONS (MAR 1996)

52.232-09 LIMITATION ON WITHHOLDING OF PAYMENTS (APR 1984)

52.232-17 INTEREST (MAY 2014)

52.232-20 LIMITATION OF COST (APR 1984)

52.232-22 LIMITATION OF FUNDS (APR 1984)

52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014) - ALTERNATE I (APR 1984)

52.232-25 PROMPT PAYMENT (JUL 2013)

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER - SYSTEM FOR AWARD

MANAGEMENT (JUL 2013)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS (DEC 2013)

52.233-01 DISPUTES (MAY 2014)

52.233-03 PROTEST AFTER AWARD (AUG 1996) - ALTERNATE I (JUN 1985)

52.233-04 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

52.237-02 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT AND VEGETATION

(APR 1984)

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

52.242-01 NOTICE OF INTENT TO DISALLOW COSTS (APR 1984)

52.242-03 PENALTIES FOR UNALLOWABLE COSTS (MAY 2014)

52.242-04 CERTIFICATION OF FINAL INDIRECT COSTS (JAN 1997)

52.242-13 BANKRUPTCY (JUL 1995)

52.243-02 CHANGES -- COST-REIMBURSEMENT (AUG 1987) - ALTERNATE V (APR 1984)

52.243-06 CHANGE ORDER ACCOUNTING (APR 1984)

52.243-07 NOTIFICATION OF CHANGES (APR 1984)

Para (b), Number of calendar days is (insert 30 for RDSS/C) '30 days' Para (d), Number of calendar days is (insert 30 for RDSS/C) '30 days'

52.244-02 SUBCONTRACTS (OCT 2010) - ALTERNATE I (JUN 2007)

Para (d), Contractor shall obtain the Contracting Officer's written consent before placing the following subcontracts: 'NONE' Para (j), the following subcontracts which were evaluated during negotiations: 'N/A'

52.244-05 COMPETITION IN SUBCONTRACTING (DEC 1996)

52.244-06 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2016)

52.245-01 GOVERNMENT PROPERTY (APR 2012)

52.245-09 USE AND CHARGES (APR 2012)

52.246-23 LIMITATION OF LIABILITY (FEB 1997)

52.247-01 COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006)

52.247-67 SUBMISSION OF TRANSPORTATION DOCUMENTS FOR AUDIT (FEB 2006)

Para (c). Insert address. '

***THE PROGRAM MANAGER LISTED IN THE STATEMENT OF WORK

ATTACHMENT OF RESPECTIVE TASK ORDERS***'

52.249-06 TERMINATION (COST-REIMBURSEMENT) (MAY 2004)

52.249-14 EXCUSABLE DELAYS (APR 1984)

52.251-01 GOVERNMENT SUPPLY SOURCES (APR 2012)

52.253-01 COMPUTER GENERATED FORMS (JAN 1991)

B. DEFENSE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-

CONTRACT-RELATED FELONIES (DEC 2008)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP

2013)

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (DEC 2012)

252.204-7000 DISCLOSURE OF INFORMATION (AUG 2013)

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (DEC 1991)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION

CONTROLS (DEC 2015)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(OCT 2015)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

Para (c)(1)(i). Insert Contract Line, Subline, or Exhibit Line Item Number and Item Description or n/a. '***TBD BY INDIVIDUAL TASK ORDER***' Para (c)(1)(ii). Identify Contract Line, Subline, or Exhibit Line Item Nr and Item Description. If items are identified in the Schedule, insert "See Schedule" '***TBD BY

INDIVIDUAL TASK ORDER***'

Para (c)(1)(iii). Attachment Nr. '***TBD BY INDIVIDUAL TASK ORDER***' Para (c)(1)(iv). Attachment Nr. '***TBD BY INDIVIDUAL TASK ORDER***' Para (f)(2)(iii). Line item number or n/a. '***TBD BY INDIVIDUAL TASK ORDER***'

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

252.211-7008 USE OF GOVERNMENT-ASSIGNED SERIAL NUMBERS (SEP 2010)

252.215-7000 PRICING ADJUSTMENTS (DEC 2012)

252.216-7006 ORDERING (MAY 2011)

Para (a). Date. '***EFFECTIVE DATE OF THE BASIC CONTRACT***' Para (a). Date '***60 MONTHS AFTER EFFECTIVE DATE OF THE BASIC

CONTRACT***'

252.222-7007 REPRESENTATION REGARDING COMBATING TRAFFICKING IN PERSONS (JAN

2015)

252.223-7001 HAZARD WARNING LABELS (DEC 1991)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR

HAZARDOUS MATERIALS - BASIC (SEP 2014)

252.225-7008 RESTRICTION ON ACQUISITION OF SPECIALTY METALS (MAR 2013)

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (FEB 2013)

252.225-7030 RESTRICTION ON ACQUISITION OF CARBON, ALLOY, AND ARMOR STEEL PLATE

(DEC 2006)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004)

252.227-7013 RIGHTS IN TECHNICAL DATA--NONCOMMERCIAL ITEMS (FEB 2014)

252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL

COMPUTER SOFTWARE DOCUMENTATION (FEB 2014)

252.227-7016 RIGHTS IN BID OR PROPOSAL INFORMATION (JAN 2011)

252.227-7019 VALIDATION OF ASSERTED RESTRICTIONS--COMPUTER SOFTWARE (SEP 2011)

252.227-7025 LIMITATIONS ON THE USE OR DISCLOSURE OF GOVERNMENT-FURNISHED

INFORMATION MARKED WITH RESTRICTIVE LEGENDS (MAY 2013)

252.227-7030 TECHNICAL DATA--WITHHOLDING OF PAYMENT (MAR 2000)

252.227-7037 VALIDATION OF RESTRICTIVE MARKINGS ON TECHNICAL DATA (JUN 2013)

252.227-7039 PATENTS--REPORTING OF SUBJECT INVENTIONS (APR 1990)

252.231-7000 SUPPLEMENTAL COST PRINCIPLES (DEC 1991)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(JUN 2012)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

252.235-7010 ACKNOWLEDGMENT OF SUPPORT AND DISCLAIMER (MAY 1995)

Para (a), name of contracting agency(ies): 'United States Air Force' Para (a), contract number(s): 'FA8650-16-D-5408' Para (b), name of contracting agency(ies): 'United States Air Force'

252.235-7011 FINAL SCIENTIFIC OR TECHNICAL REPORT (JAN 2015)

252.239-7001 INFORMATION ASSURANCE CONTRACTOR TRAINING AND CERTIFICATION (JAN

2008)

252.239-7018 SUPPLY CHAIN RISK (OCT 2015)

252.242-7006 ACCOUNTING SYSTEM ADMINISTRATION (FEB 2012)

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2012)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

252.244-7001 CONTRACTOR PURCHASING SYSTEM ADMINISTRATION - BASIC (MAY 2014)

252.245-7001 TAGGING, LABELING, AND MARKING OF GOVERNMENT-FURNISHED PROPERTY

(APR 2012)

252.245-7002 REPORTING LOSS OF GOVERNMENT PROPERTY (APR 2012)

252.245-7003 CONTRACTOR PROPERTY MANAGEMENT SYSTEM ADMINISTRATION (APR 2012)

252.245-7004 REPORTING, REUTILIZATION, AND DISPOSAL (MAR 2015)

Insert Item(s) 'TBD on individual task orders' Insert Item(s) 'TBD on individual task orders'

252.247-7024 NOTIFICATION OF TRANSPORTATION OF SUPPLIES BY SEA (MAR 2000)

252.251-7000 ORDERING FROM GOVERNMENT SUPPLY SOURCES (AUG 2012)

Para (f), Contractor's address is 'See Page 1 of this contract' Para (f), Government remittance address is 'To be determined on Individual Task Orders'

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

C. AIR FORCE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2010)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2010) - ALTERNATE III (OCT

2010)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2010) - ALTERNATE IV (OCT

2010)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2010) - ALTERNATE VI (OCT

2010)

5352.223-9001 HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (NOV 2012)

II. NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES IN FULL TEXT

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

52.216-19 ORDER LIMITATIONS (OCT 1995) (TAILORED)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $10,000.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of $12,000,000.00;

(2) Any order for a combination of items in excess of $12,000,000.00; or

(3) A series of orders from the same ordering office within 7 days that together call for quantities exceeding the limitation in subparagraph (1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(e) This is a single award Indefinite Deliver/Indefinte Quantity contract. IAW FAR 16.504(a)(4)(iv), the Contracting Officer will state the procedures that the Government will use in issuing orders in the solicitation for each proposed Task order.

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

52.252-02 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/

52.252-06 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter

1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

B. DEFENSE FAR SUPP CONTRACT CLAUSES IN FULL TEXT

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (DEC 2015)

(a) Definitions. As used in this clause s that are commensurate with the consequences and probability of loss, misuse, or unauthorized access to, or modification of information.

policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

that identifies the contractor(s), whether directly or indirectly, by the grouping of information that can be traced back to the contractor(s) (e.g., program description, facility locations), personally identifiable information, as well as trade secrets, commercial or financial information, or other commercially sensitive information that is not customarily shared outside of the company.

Contractor.

subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

for, a contractor and that processes, stores, or transmits covered defense information.

eans unclassified information that

(i) Is

(A) Provided to the contractor by or on behalf of DoD in connection with the performance of the contract; or

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

(B) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract; and

(ii) Falls in any of the following categories:

(A) Controlled technical information.

(B) Critical information (operations security). Specific facts identified through the Operations Security process about friendly intentions, capabilities, and activities vitally needed by adversaries for them to plan and act effectively so as to guarantee failure or unacceptable consequences for friendly mission accomplishment (part of Operations Security process).

(C) Export control. Unclassified information concerning certain items, commodities, technology, software, or other information whose export could reasonably be expected to adversely affect the United States national security and nonproliferation objectives. To include dual use items; items identified in export administration regulations, international traffic in arms regulations and munitions list; license applications; and sensitive nuclear technology information.

(D) Any other information, marked or otherwise identified in the contract, that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Governmentwide policies (e.g., privacy, proprietary business information).

means actions taken through the use of computer networks that result in a compromise or an actual or potentially adverse effect on an information system and/or the information residing therein.

g, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

that will have adverse impact on the confidentiality, integrity, or availability of an information system. This definition includes a virus, worm, Trojan horse, or other code-based entity that infects a host, as well as spyware and some forms of adware.

riting surfaces including, but is not limited to, magnetic tapes, optical disks, magnetic disks, large-scale integration memory chips, and printouts onto which information is recorded, stored, or printed within an information system.

airlift, sealift, intermodal transportation services, or logistical support that is essential to the mobilization, deployment, or sustainment of the Armed Forces in a contingency operation.

clause at DFARS 252.227-7013, Rights in Technical Data-Non Commercial Items, regardless of whether or not the clause is incorporated in this solicitation or contract. Examples of technical information include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, technical orders, catalog-item identifications, data sets, studies and analyses and related information, and computer software executable code and source code.

(b) Adequate security. The Contractor shall provide adequate security for all covered defense information on all covered contractor information systems that support the performance of work under this contract. To provide adequate security, the Contractor shall

(1) Implement information systems security protections on all covered contractor information systems including, at a minimum

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

(i) For covered contractor information systems that are part of an Information Technology (IT) service or system operated on behalf of the Government

(A) Cloud computing services shall be subject to the security requirements specified in the clause 252.239- 7010, Cloud Computing Services, of this contract; and

(B) Any other such IT service or system (i.e., other than cloud computing) shall be subject to the security requirements specified elsewhere in this contract; or

(ii) For covered contractor information systems that are not part of an IT service of system operated on behalf of the Government and therefore are not subject to the security requirement specified at paragraph (b)(1)(i) of this clause

(A) The security requirements in National Institute of Standards and Technology (NIST) Special Publication (SP) 800- Nonfederal Informat -171 that is in effect at the time the solicitation is issued or as authorized by the Contracting Officer, as soon as practical, but not later than December 31, 2017. The Contractor shall notify the DoD CIO, via email at osd.dibcsia@mail.mil, within 30 days of contract award, of any security requirements specified by NIST SP 800-171 not implemented at the time of contract award; or

(B) Alternative but equally effective security measures used to compensate for the inability to satisfy a particular requirement and achieve equivalent protection accepted in writing by an authorized representative of the DoD CIO; and

(2) Apply other information systems security measures when the Contractor reasonably determines that information systems security measures, in addition to those identified in paragraph (b)(1) of this clause, may be required to provide adequate security in a dynamic environment based on an assessed risk or vulnerability.

(c) Cyber incident reporting requirement.

(1) When the Contractor discovers a cyber incident that affects a covered contractor ability to perform the requirements of the contract that are designated as operationally critical support, the Contractor shall

(i) Conduct a review for evidence of compromise of covered defense information, including, but not limited to, identifying compromised computers, servers, specific data, and user accounts. This review shall also include analyzing covered contractor information system(s) that were part been accessed as a result of the incident in order to identify compromised covered defense information,

(ii) Rapidly report cyber incidents to DoD at <http://dibnet.dod.mil>.

(2) Cyber incident report. The cyber incident report shall be treated as information created by or for DoD and shall include, at a minimum, the required elements at <http://dibnet.dod.mil>.

(3) Medium assurance certificate requirement. In order to report cyber incidents in accordance with this clause, the Contractor or subcontractor shall have or acquire a DoD-approved medium assurance certificate to report cyber incidents. For information on obtaining a DoD-approved medium assurance certificate, see <http://iase.disa.mil/pki/eca/Pages/index.aspx>.

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

(d) Malicious software. The Contractor or subcontractors that discover and isolate malicious software in connection with a reported cyber incident shall submit the malicious software in accordance with instructions provided by the Contracting Officer.

(e) Media preservation and protection. When a Contractor discovers a cyber incident has occurred, the Contractor shall preserve and protect images of all known affected information systems identified in paragraph (c)(1)(i) of this clause and all relevant monitoring/packet capture data for at least 90 days from the submission of the cyber incident report to allow DoD to request the media or decline interest.

(f) Access to additional information or equipment necessary for forensic analysis. Upon request by DoD, the Contractor shall provide DoD with access to additional information or equipment that is necessary to conduct a forensic analysis.

(g) Cyber incident damage assessment activities. If DoD elects to conduct a damage assessment, the Contracting Officer will request that the Contractor provide all of the damage assessment information gathered in accordance with paragraph (e) of this clause.

(h) DoD safeguarding and use of contractor attributional/proprietary information. The Government shall protect against the unauthorized use or release of information obtained from the contractor (or derived from information obtained from the contractor) under this clause that includes contractor attributional/proprietary information, including such information submitted in accordance with paragraph (c). To the maximum extent practicable, the Contractor shall identify and mark attributional/proprietary information. In making an authorized release of such information, the Government will implement appropriate procedures to minimize the contractor attributional/proprietary information that is included in such authorized release, seeking to include only that information that is necessary for the authorized purpose(s) for which the information is being released.

(i) Use and release of contractor attributional/proprietary information not created by or for DoD.

Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is not created by or for DoD is authorized to be released outside of DoD

(1) To entities with missions that may be affected by such information;

(2) To entities that may be called upon to assist in the diagnosis, detection, or mitigation of cyber incidents;

(3) To Government entities that conduct counterintelligence or law enforcement investigations;

(4) For national security purposes, including cyber situational awareness and defense purposes (including with Defense Industrial Base (DIB) participants in the program at 32 CFR part 236);

or activities under a contract that includes the clause at 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

(j) Use and release of contractor attributional/proprietary information created by or for DoD.

Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is created by or for DoD (including the information submitted pursuant to paragraph

(c) of this clause) is authorized to be used and released outside of DoD for purposes and activities authorized by paragraph (i) of this clause, and for any other lawful Government purpose or activity, release of such information.

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

(k) The Contractor shall conduct activities under this clause in accordance with applicable laws and regulations on the interception, monitoring, access, use, and disclosure of electronic communications and data.

(l) Other safeguarding or reporting requirements. The safeguarding and cyber incident reporting incident reporting pertaining to its unclassified information systems as required by other applicable clauses of this contract, or as a result of other applicable U.S. Government statutory or regulatory requirements.

(m) Subcontracts. The Contractor shall

(1) Include this clause, including this paragraph (m), in subcontracts, or similar contractual instruments, for operationally critical support, or for which subcontract performance will involve a covered contractor information system, including subcontracts for commercial items, without alteration, except to identify the parties; and

(2) When this clause is included in a subcontract, require subcontractors to rapidly report cyber incidents directly to DoD at <http://dibnet.dod.mil> and the prime Contractor. This includes providing the incident report number, automatically assigned by DoD, to the prime Contractor (or next higher-tier subcontractor) as soon as practicable.

C. AIR FORCE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES IN FULL TEXT

5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012) (TAILORED)

CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012)

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. Contractor personnel shall identify themselves as Contractors during meetings, telephone conversations, in electronic messages, or correspondence related to this contract.

(b) The Security Procedures Supplement, found at Attachment 6, contains the procedures and processes that shall be followed for Contractor Access to Air Force Installations.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101 <http://static.e-publishing.af.mil/production/1/af_a4_7/publication/afi31-101/releasibility_for_afi31-101.pdf>, Integrated Defense, and AFI 31-501 <http://static.e-publishing.af.mil/production/1/af_a4_7/publication/afi31- 501/afi31-501.pdf>, Personnel Security Program Management] citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

SECTION I FA8650-XX-X-XXXX

PAGE X OF XX

(End of clause)

5352.242-9001 COMMON ACCESS CARDS (CAC) FOR CONTRACTOR PERSONNEL-AFRL (NOV

2012)

(a) For installation(s)/location(s) cited in the contract, contractors shall ensure Common Access Cards (CACs) are obtained by all contract or subcontract personnel who meet one or both of the following criteria:

(1) Require logical access to Department of Defense computer networks and systems in either:

(i) the unclassified environment; or

(ii) the classified environment where authorized by governing security directives.

(2) Perform work, which requires the use of a CAC for installation entry control or physical access to facilities and buildings.

(b) Contractors and their personnel shall use the following procedures to obtain CACs:

(1) Contractors shall provide a listing of personnel who require a CAC to the contracting officer. The government will provide the contractor instruction on how to complete the Contractor Verification System (CVS) application and then notify the contractor when approved.

(2) Contractor personnel shall obtain a CAC from the nearest Real Time Automated Personnel Identification Documentation System (RAPIDS) Issuing Facility (typically the local Military Personnel Flight (MPF)).

(3) Contractor personnel will proceed to the nearest CAC issuance workstation (usually the local Military Personnel Flight (MPF) with the DD Form 1172-2 and appropriate documentation to support their identification and/or citizenship. The CAC issuance workstation will then issue the CAC.

(c) While visiting or performing work on installation(s)/location(s), contractor personnel shall wear or prominently display the CAC as required by the governing local policy.

(d) During the performance period of the contract, the contractor shall:

(1) Within 7 working days of any changes to the listing of the contract personnel authorized a CAC, provide an updated listing to the contracting officer who will provide the updated listing to the authorizing government official;

(2) Return CACs in accordance with local policy/directives within 7 working days of a change in status for contractor personnel who no longer require logical or physical access;

(3) Return CACs in accordance with local policy/directives within 7 working days following a CACs expiration date; and

(4) Report lost or stolen CACs in accordance with local policy/directives.

(e) Within 7 working days following completion/termination of the contract, the contractor shall return all CACs issued to their personnel to the issuing office or the location specified by local policy/directives.

(f) Failure to comply with these requirements may result in withholding of final payment.

PART III - LIST OF DOCUMENTS, EXHIBITS & ATTACHMENTS

SECTION J - LIST OF ATTACHMENTS

SECTION J FA8650-23-D-5400

DOCUMENT PGS DATE TITLE

EXHIBIT A 10 23 AUG 2022 CONTRACT DATA REQUIREMENTS LIST (CDRL),

DD FORM 1423-1

ATTACHMENT 1 3 26 AUG 2022 STATEMENT OF WORK (SOW), ENTITLED

"MATERIALS FOR INTEGRATED NANO-

ELECTRONIC AND OPTOELECTRONIC

STRUCTURES (MINOS)"

ATTACHMENT 2 3 10 MAR 2022 STATEMENT OF WORK (SOW) SUPPLEMENTAL

REQUIREMENTS

ATTACHMENT 3 23 01 FEB 2018 AFRL/ANSI/NISO BASE GUIDE TO FORMATTING

TECHNICAL REPORTS

ATTACHMENT 4 2 01 AUG 1998 REPORT DOCUMENTATION PAGE, STANDARD

FORM 298

ATTACHMENT 5 2 10 MAR 2022 BASE SUPPORT

ATTACHMENT 6 12 10 MAR 2022 SECURITY PROCEDURES SUPPLEMENT

ATTACHMENT 7 1 10 MAR 2022 CDRL ADDRESSES

ATTACHMENT 8 2 05 APR 2022 OTHER PAYMENT INSTRUCTIONS

IDIQ Contract: FA8650-23-D-5400 Attachment 1 Materials for Integrated Nano-electronic & Optoelectronic Structures Statement of Work

26 Aug 2022

Attachment 1

STATEMENT OF WORK BASIC IDIQ

IDIQ Contract: FA8650-23-D-5400

Materials for Integrated Nano-electronic and Optoelectronic Structures (MINOS)

1.0 Background

USAF missions require sustained operations in extremely harsh environmental conditions. Material advances are needed to optimize mission success in the areas of electronic, photonic, optoelectronic and quantum materials. The Air Force Research Laboratory, Materials and Manufacturing Directorate, Nanoelectronic Materials Branch (AFRL/RXAN) has a long-standing history of conducting research on electronic, optical and optoelectronic materials for ISR and EW. As the restrictions on size and weight, and the requirements for power and alternate forms of navigation become ever more stressing, the need for more advanced electronic, optical, optoelectronic and quantum materials and devices is becoming more critical for conducting future ISR and EW missions. This contract will continue the advances made in these areas and extend them through efforts aimed at Basic Research including fundamental research in collaboration with university partners, Advanced Technology Development in collaboration with both university and industrial partners, and Advance Component Development and Prototyping in collaboration with industrial partners. The goal of this contract is to advance and transition the technologies into fielded systems that will provide new capabilities to accomplish the most stressing Air Force missions.

2.0 Objectives: The objectives of this contract are to execute research and development which exploit competencies that enhance electronic, optoelectronic, photonic, magnetic, ferroic, and quantum materials, wide-bandgap (WBG) semiconductors, ultra wide-bandgap (UWBG) semiconductors, digital & analog switching materials, electronic materials integration and hybrid systems to enable next-generation effective and novel ISR and EW systems for DAF applications.

Required tasks and their objectives are delineated below. Contractor Acquired Property (CAP) may become necessary during the conduct of this research. No purchases of CAP shall occur until receipt of written notification from the contracting officer that the conditions of FAR 45.102(b) have been successfully met. All CAP shall be delivered to the Government at the conclusion of all technical work.

3.0 Tasks and Technical Requirements:

3.1 Program Management: Provide the programmatic oversight necessary to plan, coordinate, schedule and report all activities in the performance of this effort. This includes all technical, financial and programmatic aspects including the timely and accurate accounting of principal level lines of accounting as well as sub-accounts.

26 Aug 2022

3.2 Electronic Materials Research, Development, and Prototyping: Perform research, development, demonstration, verification, validation and technology transition of electronic materials for all aspects of ISR and EW applications. This includes but is not limited to wide-bandgap (WBG) semiconductors, ultra wide-bandgap (UWBG) semiconductors, magnetic, ferroic materials, digital & analog switching materials, as well as electronic materials integration.

3.3 Photonic, Optoelectronic and Quantum Materials Research, Development, and Prototyping:

Perform research, development, demonstration, verification, validation and technology transition of photonic, optoelectronic and quantum materials for all aspects of ISR and EW applications. This includes but is not limited to solid-state qubits; optical, RF, and hybrid material technologies; modulator materials, RF magnetic materials and materials for integrated photonics; and optoelectronic sensing.

3.4 Emergent Opportunities in Electronics, Optics and Photonics: Perform research, development, demonstration, verification, validation and technology transition of the latest advances in electronic, photonic, optoelectronic and quantum materials. This includes the development of case-specific feasibility demonstrators and prototypes for demonstrating specific required capabilities in focused efforts that may be time-constrained.

3.5 Modeling and Theory: Develop theoretical models and computational tools to guide experimental work of materials used in electronic, magnetic, photonic, opto-electronic, and optical applications.

These models may cover a broad range of physical lengths from an atomistic level to a macro device level. Potential areas to consider include, but are not limited to, density functional theory, molecular dynamic theory, and finite element analysis, which could be used as building blocks for integrated computational materials science and engineering (ICMSE) approaches in material research.

3.6 Material Synthesis/Growth: Develop research materials through the use of various physical vapor and chemical vapor deposition processes to grow thin films of desired magnetic, electronic, opto-electronic, and optical nature. Examples of such systems are pulsed laser deposition (PLD), sputtering, molecular beam epitaxy (MBE), atomic layer deposition (ALD), molecular layer deposition (MLD) or other vacuum based systems as needed. Also, synthesis of materials may be done in a beaker mixing various chemicals in solution at room temperature or at high temperatures (>1000oC) where a melt is required. Such equipment may need modifications or supplies to complete the task.

3.7 Fabrication/Processing: Fabricate materials into various shapes and sizes and creating areas that are conducting (like metals), semiconducting (like dichalgenides) or insulating (like oxides, nitrides). In order to do this, various techniques will be needed but not limited to focused ion beam, ultra violet lithography, nano lithography, e-beam lithography, reactive ion etching, wet chemical treatment involving acids and solvents, metal vaporation / sputtering, ion implantation, and mechanical and electronic fixture arrangements. Such equipment may need modifications or supplies to complete the task.

3.8 Characterization/Testing: Many types of characterization and testing procedures are needed to study both material quality and device operation. In general, these can fall into magnetic, electronic, optical and thermal testing techniques, combined with mechanical loading in some test scenarios. These techniques can encompass the areas of microscopy, spectroscopy, transport, and radiation. Typical techniques include, but are not limited to: atomic, electric, piezoelectric, and magnetic force microscopy; scanning electron and transmission electron microscopy, infra-red, thermal atomic force microscopy; secondary ion mass spectroscopy, x-ray photo electron spectroscopy, Raman spectroscopy, impedance and dielectric spectroscopy, scanning tunneling probe spectroscopy, magnetic field measurements like Hall Effect, resonance; optical absorption and emission, photoluminescence; time

26 Aug 2022 domain thermoreflectance; spin and electron currents; x-ray diffraction; micron-scale in-situ measurement.