ATT 1 Statement of Work with Item Specifications.pdf
PDF 382 KB Posted
- Attached to
- Service Body for Truck with Installation
- Solicitation number
- 1284LM25Q0004
- Issued by
-
Department of Agriculture Forest Service
About this file
This Statement of Work outlines requirements for procuring and installing a service body on a government-furnished 2024 RAM 3500 single rear wheel 4x4 crew chassis for the Flathead National Forest.
The contractor must provide and install a 96" steel service body with a fully enclosed cargo area, featuring a telescoping sliding roof system (2-3 pieces) with fold-over locking tailgate door, solid metal paneling separating exterior compartments from the main bed, weatherproof cabinet doors with gas struts and adjustable shelving, integrated backup camera, and a hitch recessed bumper. All compartments must be lockable with the same key and include specified ventilation points shown in the diagrams. The government will provide the 2024 RAM 3500 chassis (VIN# 3C7WR3GJ5RG316036) and OEM backup camera. Installation must be completed by April 15, 2025, within 150 miles of Kalispell, MT (650 Wolfpack Way) or the vendor must handle vehicle transport. The service body design specifically accommodates firefighting and safety equipment storage needs for a Fire Engine Module.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SAM 1284LM25Q0004 with Clauses and Provisions.pdf | ||
| ATT 2 Wage Determinations.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Service Body Procurement and Installation
Statement of Work
Project 0110-4279 Service Body Procurement and Installation
General Information
1.0 Scope of Work
Provide a Service body for a 2024 Ram 3500 single rear wheel chassis Installation of Service body on the Gov. furnished vehicle
VEHICLE POINT OF CONTACT:
Ryan Penatzer, R1 Flathead NF Assistant Fleet Manager.
406-481-5268
2.0 Background
Procure and Install Service Body to specifications and agency standards.
Service Body built to fit “2024 RAM 3500 Single Rear Wheel 4x4 Crew Chassis.” Service body with a fully enclosed cargo area.
Solid metal paneling installed on the inside of the main bed compartment to separate the exterior accessed compartments from the main bed compartment. Enclosed bed compartment to be accessible through a “Telescoping Sliding Roof” comprised of a 2-3 piece system with a fold-over locking tailgate door. Installation of service body to be included. The attached images are to illustrate key features and compartment arrangement. Compartment arrangement and specifications are designed to organize and separate fuel, water, food, tools, and other gear. The proper storage, cleanliness, and accessibility of essential firefighting and safety equipment is imperative to the mission of the Fire Engine Module using the vehicle.
Contractor Requirements
3.0 Technical Requirements / Tasks
* Installation and build of a 96” Steel Service Body on a 2024 RAM 3500 to meet agency standards see attachments for configuration.
*Service Body with a fully enclosed cargo area built to fit a 2024 RAM 3500 Single Rear Wheel 4x4 Crew Cab Chassis.
*Solid metal paneling installed on the inside of the main bed compartment to separate the exterior accessed compartment from the main bed compartment.
*Enclosed bed compartment to be accessible through a Telescoping Sliding Roof comprised of a 2-3 piece system with a fold-over locking tailgate door.
* All vertical cabinet doors will have gas strut or double spring door holder(s) to facilitate both hold open and closing, and doors shall not interfere with each other when open.
* The full height vertical cabinets should be furnished with two removeable shelves and be adjustable full height within cabinet.
* All horizontal doors shall have two removable chains, or cables to hold open at 90-degree position and be reinforced to permit their use as a work surface.
* All horizontal cabinets should be furnished with one removable shelf and be adjustable full height within cabinet.
* Cabinet doors shall provide access to all portions of each cabinet.
* Closures shall be weatherproof and dustproof incorporating Door an automotive rubber type seal.
* All doors including telescopic roof shall be provided with a cylinder type lock, operable from the same key.
* Latches, Hinges, and Striker-Plates shall be nonwelded, and easily replaceable.
* Hitch Recessed Bumper to be installed to accommodate hitch access on the chassis.
* Service Body shall be outfitted with a back-up camera that integrates with factory display interior of vehicle that will be provided with the vehicle.
4.0 Government Furnished
• 2024 RAM 3500 cab & chassis VIN# 3C7WR3GJ5RG316036
• OEM Backup camera
5.0 Deliverables / Schedule
• Flathead NF will drop off and pick up Vehicle for procurement and install of service body and will be able to travel within a 150 miles radius of 650 Wolfpack Way Kalispell MT 59901 for drop off and pick up of 2024 RAM 3500 if outside this radius vendor will need to pick up and drop off.
Key Deliverables
Item No. Deliverable Objective Due 1 Service body
Procurement and installation
Procure and install Service body on a 2024 RAM 3500 to meet agency standards
04/15/2025
Attachment If applicable, include an Attachment stating Evaluation Factors and significant Subfactors representing the key areas of importance and emphasis to be considered in the source selection decision.
SEE BELOW
Image 1: Side views that illustrates compartment configuration. Compartments identified by red dot ( ) should be ventilated.
Image 2: Top view that illustrates “Telescopic Sliding Roof” bed cover. (Image shows a 2-piece cover)
Image 3: Image illustrates “Hitch Recess Bumper.”
| General Information |
| 1.0 Scope of Work |
| 2.0 Background |
| Contractor Requirements |
| 3.0 Technical Requirements / Tasks |
| 4.0 Government Furnished |
| 5.0 Deliverables / Schedule |
| Attachment |
File details come from the government source that posted it. Updated .