Att 1 22-Q-7054.doc
DOC document 146 KB Posted
- Attached to
- Hose Assembly Federal contract opportunity
- Solicitation number
- SPMYM3-22-Q-7054
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 22-Q-7054 Combined Synopsis Sol.pdf | ||
| 252.204-7019 7020 Instructions for SPRS.docx | DOCX document | |
| 52.204-24 204-25 204-26 252.204-7016.docx | DOCX document | |
| DLAD LOCAL and PROC Notes.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
ATTACHMENT
PRINTED
08/02/2022
PAGE
1A
ITEM NO.
0001 Attachment – 1 Page 1 of 2
SECTION B STOCK NUMBER 4720-LL-L01-0015
SMIC DB
ITEM NAME HOSE ASSEMBLY, (SATURATED STEAM SERVICE), MIL-DTL-29210E SPECIAL CHARACTERISTICS INSIDE DIAMETER: 3/4", LENGTH 25 FT +2/-0% VARIANCE ACCEPTABLE(INCLUDING END FITTINGS), MILPEC P/N: M29210-25-075-MM-B OR M29210-25-075-MM-Z, HOSE END FITTING SHALL BE DIXON VALVE AND COUPLING, SEE DESCRIPTION/SPECIFICATION IN SECTION C
| DESCRIPTION/SPECIFICATIONS |
| HOSE ASSEMBLIES TO BE IN ACCORDANCE WITH MIL-DTL-29210E(NAVY) PARAGRAPH 6.2 (ORDERING DATA): |
| "HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE", MIL-DTL-29210E 07 APRIL 2009. |
| SIZE AND PIN OF HOSE TO BE AS INDICATED IN SECTION B OF THIS SCHEDULE. SEE (C.2) BELOW FOR END FITTING STYLES. |
| FIRST ARTICLE IS REQUIRED. |
| VERTICAL HANGING PROOF PRESSURE TESTING IS NOT REQUIRED |
| WORKMANSHIP TESTING PER SPECIFICATION |
| FIRST ARTICLE REPORTS FROM THE MANUFACTURER SHALL BE SUBMITTED TO PORTSMOUTH NAVAL SHIPYARD, CODE 245.3 THROUGH THE CONTRACTING OFFICE WITHIN 30 DAYS FROM CONTRACT AWARD. THE CONTRACTOR SHALL TEST ONE HOSE ASSEMBLY. GOVERNMENT OVERSIGHT IS NOT REQUIRED. CONTRACTOR WILL BE NOTIFIED OF ACCEPTANCE/REJECTION WITHIN 21 DAYS OF SUBMITTAL OF FIRST ARTICLE REPORTS. |
| N/A |
| PACKAGING TO BE AS INDICATED IN SECTION D OF THIS SCHEDULE. |
HOSE FITTINGS FOR 3/4" HOSE SHALL BE:
FIRST AND SECOND END FITTINGS - 3/4" NPT MALE STEM, DIXON P/N: MS6-3. CLAMPS DIXON P/N: BU9
HOSE END FITTINGS FOR 1"HOSE SHALL BE:
FIRST END - WING NUT, DIXON P/N: B12 AND STEM, DIXON P/N: GB11-3. SECOND END - 1" NPT MALE STEM, DIXON P/N: MS11-3. CLAMPS DIXON P/N B14
HOSE END FITTINGS FOR 1-1/2"HOSE SHALL BE:
FIRST END - WING NUT, DIXON P/N: B17 AND STEM, DIXON P/N: GB21-3. SECOND END - 1-1/2" NPT MALE STEM, DIXON P/N: MS21-3 AND FEMALE CLAMP, DIXON P/N: B24, MALE CLAMP, DIXON P/N: B22. DIXON PN 212 WITH LARGER BOLT TORQUED TO 40 FT-LBS IS AN ACCEPTABLE CONFIGURATON IF MINIMUM TORQUE IS NOT ABLE TO BE MEET WITH B22 CLAMPS.
HOSE REINFORCEMENT WIRE MAY BE BRASS OR ZINC-PLATED HIGH TENSILE CARBON STEEL WIRE.
STAINLESS STEEL HOSE REINFORCEMENT WIRE IS UNACCEPTABLE DUE TO REPORTS OF PREMATURE HOSE FAILURE AT OTHER SHIPYARDS.
THE HOSE COLOR SHALL BE BLACK. YELLOW MARKINGS OR HOSE COLOR IS UNACCEPTABLE. FOR THE 1" HOSE ASSEMBLIES LSN 4720-LL-L01-0016 RED HOSE COLOR IS ACCEPTABLE.
C.8 C500 MERCURY CONTROL (SUPPLIES) D PRESERVATION/PACKAGING/PACKING
| PARAGRAPH 5.1 OF PROCUREMENT SPEC. MIL-DTL-29210E LEVEL C. |
| HOSE ENDS SHALL BE SEALED WITH PLASTIC PLUGS OR PLASTIC CAPS |
TO PREVENT ENTRY OF FOREIGN MATERIALS DURING SHIPPING/STORAGE. E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
H SPECIAL PROVISIONS
| Section |
| Section M Section |
SWEENEY.HEATH ER.S.1455804520
Digitally signed by SWEENEY.HEATHER.S.145580452 0 Date: 2022.08.02 08:57:15 -04'00'
File details come from the government source that posted it. Updated .