Atch1- Draft SOW- Sensor Calibration for Measurement Specialties Products .pdf

Sensor Calibration Requirements Document

For 704th Test Group/846th Test Squadron

1 Purpose

1.1 The 704th Test Group (704 TG) mission is to be the premier provider of unique test and evaluation capabilities relevant to tomorrow’s warfighter through world-class people improving technical excellence, cost-effectiveness, and agility. The 846th Test Squadron

(846 TS) is one of the units assigned to the 704 TG. The 846 TS’s primary test capability is the Holloman High Speed Test Track (HHSTT) where rocket powered sled trains are utilized to simulate flight-like environments and scenarios with the control and recovery of a ground-based system. In order to collect data from these systems, various sensors are essential. These sensors are required for test mission validation of various avionics platforms, payloads, and equipment for the Department of Defense in conjunction with its partners over a number of differing rocket sled configurations. The 846 TS must have sensors for each mission and have them calibrated at scheduled times. The following requirements include calibration requirements for each sensor.

2 Scope

2.1 The Contractor shall deliver calibrated sensors as needed.

3 Estimated Annual Sensor Calibration Requirements:

Description MFR Part Number

Single Axis Linear Accelerometer Measurement Specialties

ECGS-S425

Accelerometer/40A series

Single Axis Piezoresistive

Accelerometer Measurement Specialties 3801A-100

3.1 Sensor Calibration Specifications:

3.1.1 Linear Accelerometer [Model 40A or Model EGCS-S425]

Calibrate at 10g and selectable excitation voltage (5 VDC or 10 VDC) from 5 - 1,000

Hz

All tests and calibrations are done in accordance with traceability to National Metrology

Institue such as National Institue of Standards and Technology (NIST)

Provide calibration certificate with test results

Calibration must meet A2LA Accreditation

3.1.2 Linear Accelerometer [Model 3801A-100]

Calibrate at 10 g and selectable excitation voltage (5 VDC or 10 VDC) from 5 - 1,500

Hz

All tests and calibrations are done in accordance with traceability to National Metrology

Institue such as National Institue of Standards and Technology (NIST)

Provide calibration certificate with test results

Calibration must meet A2LA Accreditation

4 Milestones

4.1 The contractor shall deliver the required sensors calibrated to the 846 TS following purchase order NLT 60 days ARO.

5 Deliverables

5.1 The contractor shall deliver all hardware and documentation to 704 TSS/XPL, Attn: Jim

Bigas at 1644 Vandergrift Road, Building 1260, Holloman Air Force Base, New Mexico

88330-7850.