Atch 5 201754323-31.pdf
PDF 297 KB Posted
- Attached to
- 15108 DCSA Sources Sought Synopsis
- Solicitation number
- 15108
About this file
This is an engineering drawing for a Display Wire Clamshell, Consolidated Stack component manufactured from aluminum alloy 6061-T6. The part is identified by drawing number 201754323-31, revision 0.02, with a cage code of D and assigned to the U.S. Air Force ATS Program Office. The component weighs 0.133 pounds and is drawn to a 3:1 scale.
The drawing specifies detailed manufacturing and finishing requirements including chemical film per MIL-DTL-5541 Type 1 Class 3, epoxy prime per MIL-DTL-0053022 Type II on exterior surfaces, and white polyurethane coating per MIL-PRF-85285 Type II Class H (color #17925 per FED-STD-595). Dimensional tolerances are specified as 1/32 inch for fractions, ±0.030 inches for two-place decimals, and ±0.010 inches for three-place decimals. The drawing was prepared in accordance with ASME Y14.100 and interpreted per ASME Y14.5-2009. Manufacturing must conform to MIL-HDBK-454 and MIL-STD-108, with all parts cleaned of foreign material after fabrication. The document is marked as preliminary with a distribution statement limiting dissemination to DoD and DoD contractors only, and is subject to export control restrictions under the Arms Export Control Act.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Atch 6 201754323-40.pdf | ||
| Atch 4 201754322-47.pdf | ||
| Atch 3 201754322-40.pdf | ||
| Atch 1 15108 DCSA Equipment List_Redacted.pdf | ||
| Atch 2 201754322-37.pdf | ||
| 15108 DCSA RFI SSS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AL 6061-T6DISPLAY WIRE CLAMSHELL, CONSOLIDATED STACK201754323-3198752
PARTS LIST
NOTEMATERIAL/SPECIFICATIONDESCRIPTIONPART NUMBERCAGEC
98752D 201754323-31 0.02
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES-TOLERANCES ON:
FRACTIONS DECIMALS ANGLES
± 1/32 .X ± .100
.XX ± .030
.XXX ± .010
± 2°
THIRD ANGLE PROJECTION
DRAFTER
CHECKER
PROJECT ENGINEER
ENGINEERING APPROVAL
A.F. AUTHENTICATION
RELEASE
J.GILLMOR
T.PRICE
T.PRICE
B.BINGHAM
E.MULLINAX
K.SIMPSON
516 MXDPAF
516 MXDPAF
516 MXDPAF
516 MXDPAF
AFLCMC/WNAEA
AFLCMC/WNAE
DATE
3/17/2025
3/17/2025
3/17/2025
3/17/2025
U.S. AIR FORCE
TITLE
DISPLAY WIRE CLAM SHELL,
CONSOLIDATED STACK
SIZE CAGE CODE DWG NO. REV
SCALE WEIGHT SHEET
3:1 0.133 LBS 1 OF 3
INVENTOR
CAD PROG: VER:
COMPUTER DRAWING
FILE NAME:
201754323-31.idw
UNLESS OTHERWISE INDICATED:
-DRAWING WAS PREPARED IN ACCORDANCE
WITH ASME 14.100, APPX. B THRU. E
-INTERPRET DRAWINGS IN ACCORDANCE WITH
ASME Y14.5-2009
-REMOVE BURRS AND BREAK SHARP EDGES
DESIGNED FOR:
ATS PROGRAM OFFICE
NEXT ASSY
201754323-30 2020109112-10
USED ON
APPLICATION
A A
B B
C C
D D
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
0.02 INITIAL RELEASE 3/17/2025 B.BINGHAM
PRELIMINARY
3/17/2025
DISTRIBUTION STATEMENT D
DESTRUCTION NOTICE
WARNING
DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY
FOR ADMINISTRATIVE OR OPERATIONAL USE. DATE OF DETERMINATION
IS . OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO THE
ATS PROGRAM OFFICE AFLCMC/WNA-ATS ROBINS A.F.B GA. 31098.
QUESTIONS CONCERNING TECHNICAL CONTENT SHALL BE REFERRED TO
309 SWEG/516 SWES/MXDPAF HILL A.F.B. UT. 84056
DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF
CONTENTS OR RECONSTRUCTION OF THE DOCUMENTS.
EXPORT CONTROLLED. THIS DOCUMENT CONTAINS TECHNICAL
DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT
CONTROL ACT (TITLE 22, U.S.C.2751 ET SEQ.) OR THE EXPORT
ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C.,APP.
2401 ET SEQ. VIOLATION OF THESE EXPORT-CONTROL LAWS IS
SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATION OF
THIS DOCUMENT IS CONTROLLED UNDER DoD DIRECTIVE 5230.25.
ALL SHEETS ARE THE
SAME REVISION STATUS
NOTES:
FINISH: EXCEPT WHERE SPECIFIED.
A. CHEM FILM PER MIL-DTL-5541, TYPE 1, CLASS 3
B. PRIME EXTERIOR ONLY WITH EPOXY PRIME PER MIL-DTL-0053022, TYPE II EXCEPT ON NOTED AREAS.
C. PAINT EXTERIOR ONLY WITH WHITE POLYURETHANE COATING PER MIL-PRF-85285, TYPE II, CLASS H COLOR # 17925 OF FED-STD-595.
1. IDENTIFY PART IN ACCORDANCE WITH MIL-STD-130. BAG AND TAG ALL ITEMS TOO SMALL TO IDENTIFY.
2. MASK FROM PRIMER AND PAINT.
3. ALL FABRICATION TO CONFORM TO MIL-HDBK-454 & MIL-STD-108.
4. AFTER FABRICATION, PARTS AND ASSEMBLED EQUIPMENT SHALL BE CLEANED OF SMUDGES; LOOSE, SPATTERED, OR EXCESS SOLDER; WELD METAL; METAL CHIPS AND MOLD
RELEASE AGENTS; OR ANY OTHER FOREIGN MATERIAL WHICH MIGHT DETRACT FROM THE INTENDED OPERATION, FUNCTION, OR APPEARANCE OF THE EQUIPMENT.
5. FOR DIMENSIONS NOT SHOWN REFER TO CAD DATA.
6. CAD DATA IS BASIC UNLESS OTHERWISE SPECIFIED 0.030.
-31 DISPLAY WIRE CLAMSHELL, CONSOLIDATED STACK
SECTION A-A
SCALE 3 : 1
SECTION B-B
SCALE 3 : 1
SPLIT ISOMETRIC
SCALE 3 : 1
A
A
B B
SIZE
DWG NO REV
SCALE
SHEET
OF
CAGE CODE
98752
D
0.02
201754323-31
J.GILLMOR
DRAWN:
CHECKED:
T.PRICE
3:1
A A
B B
C C
D D
1.0625.010
3.750
.125
.500
.000
.015
.375
3.500
.000
.015
3.970
.110 .110
.750
R.375
(1.000)
.625
.015
.000
.500
(.125)
(R.125) WIRE CHANNEL
2X 4-40 UNC - 2B .275
R.1254X END MILL RELIEF
R.125 END MILL RELIEF
R.1252X END MILL RELIEF
R.0303X WIRE CHANNEL SMOOTHING
R.125
R.125 END OF CHANNEL
(.125)
A
A
B
1.750
(.235) (.235)
.007 A B
.250 (1.275)
.000 A B
.000 B
.250
(.125)
.550 .50 WITH .125 END RADIUS
(.45)
WHERE ENLARGED HOLE RADIUS
MEETS INNER CHAMBER
.375 BETWEEN RADIAL CUTS
.0625R .0102X
FULL RADIAL CUTS
(.1875)
-31 MASKING REFERENCE
(MASK SHADED AREAS)
SIZE
DWG NO REV
SCALE
SHEET
OF
CAGE CODE
98752
D
0.02
201754323-31
J.GILLMOR
DRAWN:
CHECKED:
T.PRICE
2:1
A A
B B
C C
D D
File details come from the government source that posted it. Updated .