The file's text, extracted by GovTribe without its formatting.
Equipment Requirements:
Rental of >=90 horsepower or greater tracked diesel skid steer with Heating/AC, High and Low flow hydraulics with both fittings on skid steer, fall over protection, electrical fitting for auxiliary hydraulics, impact resistant windshield protection, windshield and other windows must be clear and have good visibility. Joystick controls (not foot pedals) for piling eastern red cedar trees in the Nebraska Sandhills.
Minimum Specifications of each Skid Steer
Skid Steer shall have a minimum operating horsepower rating of greater or equal to 90 hp.
Skid Steer shall have a lift capacity of 3,000 lbs. or greater
Skid Steer is a tracked diesel with fall over protection
Skid Steer shall have heating and AC
High and Low flow hydraulics with both fittings on each skid steer
Front windshield must be Impact resistant (Cannot be Glass), windows must be clear and have good visibility
8 pin electrical fitting for auxiliary hydraulics
Joystick controls (not foot pedals)
Able to support both an 85” Virnig large capacity skeleton grapple and a load of Eastern Red Cedar trees.
Specifications need to be equal to or greater than a Kubota SVL95
| Type of operator station |
| Open CAB / Closed CAB |
| Engine |
| Model |
| V3800-CR-TIEF4 |
| Output (SAE J1995 gross) |
| HP (kW)/rpm |
| 96.4 (71.9)/2400 |
| Output (SAE J1995 net) |
| HP (kW)/rpm |
| 95.0 (70.8)/2400 |
| Displacement |
| cu.in. (cc) |
| 230.0 (3769) |
| Bore x stroke |
| in.(mm) |
| 3.94 (100) x 4.72 (120) |
Loader performance
| Rated operating capacity-35% tipping load |
| lbf. (kg) |
| 3200 (1451) |
| Tipping load |
| lbs. (kg) |
| 9143 (4147) |
| Breakout force |
| Bucket |
| lbf. (kg) |
| 7961 (3611) |
| Lift arm |
| lbf. (kg) |
| 6742 (3058) |
Lift arm path
Vertical
| Undercarriage |
| Track width |
| Standard |
| in.(mm) |
| 17.7 (450) |
| Ground pressure |
| Standard |
| psi |
| 4.4 / 4.5 |
| Track rollers (per side) |
| 5 |
| Track ground contact length |
| in.(mm) |
| 65.6 (1667) |
| Travel speed |
| Low |
| mph (km/h) |
| 5.0 (8.0) |
| High |
| mph (km/h) |
| 7.3 (11.7) |
| Traction force |
| lbf. (kg) |
| 12178 (5524) |
| Min. ground clearance |
| in. (mm) |
| 11.5 (293) |
Hydraulic system
| Aux. hydraulic flow |
| Standard / High |
| gpm (l/min.) |
| 23.1 (87.6) / 40.0 (152) |
| Aux. hydraulic pressure |
| psi (kgf/cm2) |
| 3553 (249.8) |
Service refill capacities
| Hydraulic system |
| gal.(l) |
| 17.96 (68) |
| Hydraulic tank |
| gal.(l) |
| 10.1 (38.1) |
| Fuel tank |
| gal.(l) |
| 28.8 (109) |
| DEF tank |
| gal.(l) |
| 5.0 (18.8) |
| Operating weight (include operator weight 165 lbs.) |
| lbs. (kg) |
| 11299 (5125) / 11574 (5250) |
| A |
| Length of track on ground |
| in. (mm) |
| 65.6 (1667) |
| B |
| Track gauge |
| in. (mm) |
| 59.5 (1512) |
| C |
| Length w/o bucket |
| in. (mm) |
| 123.5 (3137) |
| D |
| Length w/bucket on ground |
| in. (mm) |
| 154.6 (3929) |
| E |
| Height to top of cab |
| in. (mm) |
| 83.3 (2116) |
| F |
| Bucket hinge pin height at max. lift |
| in. (mm) |
| 128.5 (3264) |
| G |
| Rollback angle at carry position |
| degree |
| 27 |
| H |
| Reach at max. lift and dump |
| in. (mm) |
| 40.7 (1035) |
| I |
| Ground clearance |
| in. (mm) |
| 11.5 (293) |
| J |
| Departure angle |
| degree |
| 31 |
| K |
| Max. dump angle |
| degree |
| 43 |
| L |
| Vehicle width |
| in. (mm) |
| 77.2 (1962) |
| M |
| Width with bucket |
| in. (mm) |
| 80 (2032) |
| N |
| Turning radius from center-machine rear |
| in. (mm) |
| 127 (3220) |
image1.gif
