Atch 1 CMM 1760 Laser Tracker Spec_Redacted.pdf

Specifications for

Portable (CMM) Laser Tracker at

Arnold Air Force Base, TN

Arnold Engineering Development Complex (AEDC)

The specific machine brand/model is the FARO Laser Tracker Vantage with no Wi-Fi, Item 810-

000032-010. This Precision Portable (CMM) Laser Tracker will become an integral part of the

Manufacturing Group’s Precision Inspection Lab to ensure that AEDC’s Test Cells have all the necessary equipment to make Test Hardware Alignments and perform required Calibrations related to certain Test Project’s needs. This CMM will be an immediate asset in the support of

Customer and Test related projects.

Due to existing software, similar purchased CMM’s, periodic service and calibration requirements;

any other machine or machine software combinations will need to be reviewed and approved by the requester prior to purchase.

Provide all materials, labor, and equipment necessary to provide a new fully functional Laser

Tracker (Portable CMM). Refurbished or remanufactured machine or parts are not authorized for this requirement.

General Requirements

Portable, high accuracy 6 Degrees of Freedom Laser Tracking System.

Large volume contact measurement with ability to take high speed continuous measurement with targets.

Capable of seamless integration with CMM Scan Arm and 6 Degrees of Freedom Probe.

Required Hardware Configuration, Capabilities and Specifications – Portable Laser

Tracker

Configuration:

The Laser Tracker shall not have an external Master Control Unit (MCU).

The Laser Tracker shall have a maximum radial measurement range of 80m (262.5ft).

The Laser Tracker shall have a minimum measurement range of 0m (0ft).

The Laser Tracker shall have the option for battery power, eliminating the need for continuous wall power, with a battery life of 8 hours continuous operation (2 batteries), hot-swappable.

The Laser Tracker and handheld probe system shall have the following connectivity options:

o Ethernet: RJ45 port supporting GigE.

o Optional Wi-Fi: 802.11n (and earlier).

o Must be able to operate in non-Wi-Fi environments.

The Laser Tracker must utilize a Class 1 Laser.

The Laser Tracker shall have an Ingress Protection IP52 per IEC 60529 or better.

The Laser Tracker shall have versatile mounting, allowing the unit to be mounted on a variety of stands in many configurations including vertically, horizontally, upside down, or even at an angle to fit in tight, confined areas.

The Laser Tracker shall have continuous rotation of the Azimuth encoder for ease of use and eliminating end-stops.

The Laser Tracker shall have the following physical, range and measurement envelope:

o Size: 240(W) x 416(H) mm [9.4(W) x 16.4(H) in].

o Weight: 13.4kg (29.5lb).

o Horizontal Rotational Envelope: 360° – Infinite rotation.

o Vertical Rotational Envelope: 130° (+77.9° to -52.1°) – Infinite rotation.

Capabilities:

The Laser Tracker must have the ability to measure with an optional handheld 6 Degrees of Freedom (6DoF) Probe specifications of or better than:

o Accuracy (MPE): 95μm + 5μm/m with 50mm stylus length (0.0037in +

0.00006in/ft. with 1.97in stylus length).

o Probe Maximum Permissible Error (MPE) must be certified per ISO 10360-

10:2016.

o The Laser Tracker must be able to measure handheld probe position and orientation at 250 data points per second, non-interpolated.

o Probe must be able to operate without wires and be able to operate in non-Wi-Fi environments.

o Range: 2.5m to 15m (8.20ft to 49.21ft).

o Data Output Rate: 1,000 measurement points per second.

o Battery Life: 2-4 hours for continuous use, typical 8+ hours.

o Roll: 360 Degrees.

o Pitch: 15 Degrees.

o Yaw: 15 Degrees.

o Active Seek: Yes.

The Laser Tracker shall have the ability to integrate with a CMM Scan Arm to a single coordinate system with a Spherical Mirror Reflector (SMR) target mounted directly on the CMM Scan Arm.

o This integration and process shall require no external tooling or fixtures outside of a high accuracy SMR target mounted directly on the CMM arm.

The Laser Tracker shall have a data output rate of at least 1,000 points per second, while providing feedback for high-speed motion control and high-density scanning.

The Laser Tracker shall have a remote-control feature that allows the user to control the movements and other functions with a mobile phone or tablet, or even gesturing with a target.

The Laser Tracker shall have the ability to remotely power on/off and schedule warm-up to improve workflow by making the Vantage ready for immediate operation when the user begins measuring.

The Laser Tracker shall have a quick compensation feature that optimizes measurements based on specific ranges to maintain high system accuracy.

Computer Specifications:

The Laser Tracker system shall include a standalone PC. The standalone PC shall meet these specifications:

o Model: HP Z Book 17 G5.

o Processor: Intel Core i7-8850H.

o RAM: 32 GB, DDR4-2666 MHz.

o Hard Drive: 256 GB SSD and 500GB 7200 RPM Optical Drive.

o Screen: 17.3” Wide Screen HD LED.

o Video: NVIDIA Quadro P3200 w/ 6GB GDDR5.

o With Ethernet adapter, Wi-Fi (802.11ac), Bluetooth 5.

o Windows 10 Professional 64-bit operating system.

o 3 year warranty.

Software Specification:

CAM2 Probing Edition 3D Software shall be included with the Laser Tracker system.

Each Laser Tracker system shall be provided with a permanently licensed, Single User

Hard Lock USB Dongle 3D measurement software platform upgrade.

The software package shall be installed and operate on the Windows 10 based PC outlined above and integrate seamlessly with the Laser Tracker.

Software restoration, including instructions, shall be provided in downloadable format.

Laser Tracker Camera system capabilities:

The Laser Tracker shall have a camera system with at least a 45-degree Field of View.

The Laser Tracker shall have a Smart Find function, which enables camera-tracking of the

SMR target and quick lock-on when the SMR target becomes stationary.

The Laser Tracker shall have the ability to find the SMR target with gestures.

The Laser Tracker shall have a two-camera system assisting in locating a specific target quickly and efficiently. This must operate in all lighting conditions from complete darkness to bright sunlight.

Accuracy Specifications:

The Laser Tracker accuracy specifications shall be certified to ASME B89.4.19 - 2006.

The Laser Tracker shall be approved to operate within the following Environmental

Conditions:

o Altitude: -700 to 9,000m (-2,297 to 29,527ft).

o Humidity: 0% to 95% non-condensing.

o Operating Temperature: -15°C to 50°C (5°F to 122°F).

The Laser Tracker shall have Distance Measurement Performance of or better than:

o Resolution: 0.5μm (0.00002in).

o Accuracy (MPE): 16μm + 0.8μm/m (0.00063in + 0.0000096in/ft.).

o Max Radial Acceleration: 30m/sec2 (82.0ft/sec2).

o Max Radial Velocity: > 25m/sec (98.4ft/sec).

o Angular Accuracy (MPE): 20μm + 5μm/m (0.00079in+ 0.00006in/ft.).

o Precision Level Accuracy: +/- 2 arc seconds.

o Max Angular Acceleration: 860°/sec^2 (15 rads/sec2).

o Max Angular Velocity: 180°/sec (π rads/sec).

Training Requirements o 3-day ‘basic’ training on CAM2 Probing Edition package, on-site. Trainer travel expenses included as well as the cost of training is included in the cost of the equipment.

o Training at customer site for up to 2 people.

Accessories o Laptop Stand Package o (Qty.2) - 1.5” SMR- Standard Accuracy, BR, Black Ring, Break-Resistant

Target features a single element retroreflector with a gold coating and a black ring. The vertex is centered within +/- .0076mm (.0003”).

o Stand accessory – 10” Extension. Riser used to increase the height of any rolling stand, tripod, magnetic mount or surface plate mount. 3.5” Ring Mount:

10” (254mm).

Warranty, Maintenance, Parts & Service

Complete Care Service plan includes parts and labor for repair and annual cleaning and calibration. Extends coverage through year 3 from point of sale.

Laser tracker comes with 1 year warranty and with the care service plan adds an additional 2 yrs. of coverage.

Packaging/Delivery o Provide all preservation, packaging, and packing to ensure safe delivery of the machine and related components to AEDC Model Shop Inspection Lab (Building

451) (FOB Arnold Air Force Base, TN 37389).

Initial Start/Setup Service, Manuals Training and Verification o After delivery to the AEDC Model Shop Inspection Lab (Building 451) the Contractor shall un-package, setup and test run the portable CMM at the site in accordance with functional tests for accuracy required by ISO Standards.

o Contractor shall provide the following documentation during the initial setup:

- Acceptance documents.

- Maintenance/Calibration Manual, Electrical Manual, One hard copy with DVD disks or downloadable from Internet.