ASTM A36 A36M-19 Specifications.pdf
PDF 113 KB Posted
- Attached to
- Angle, Structural Steel Federal contract opportunity
- Solicitation number
- SPMYM223Q1715
About this file
This document provides material ordering data for structural steel angle according to ASTM A36/A36M specifications. The order is for 200 feet of 1-1/4" x 1-1/4" x 3/16" structural steel angle shapes, cut into random lengths between 20 to 30 feet. Testing and documentation requirements include a mechanical property test report for each heat supplied according to specification paragraph 14. Packaging, marking and loading requirements are to be in accordance with specification paragraph 19.3 and MIL-STD-129. The related federal contract opportunity from the Defense Logistics Agency Land and Maritime seeks offers for structural steel angle to these specifications, but no further details are provided on pricing terms, response dates or other solicitation details.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| ASTM-A-6 Standard Specification.rev1.pdf | ||
| SPMYM223Q1715-1 Angle.pdf | ||
| CDRL Exhibit A_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-A6/A6M
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 3173-7914
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 4 Ordering Data
ASTM-A6/A6M, STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
ROLLED STRUCTURAL STEEL BARS, PLATES, SHAPES AND SHEET PILING,
dated 15 NOVEMBER 2022.
4.1.1 Select ASTM product specification designation:
A36/A36M
Select One (cont.):
4.1.2 Name of structural product: shape
4.1.3 Shape designation, or size and thickness or diameter: 1-1/4" X 1-1/4" X 3/16" THK
4.1.4 Grade, Class and Type designation, if applicable: N/A
4.1.5 Condition, if other than as-rolled: N/A
4.1.6 Quantity (weight [mass] or number of pieces): 200 feet
4.1.7 Length: 20 to 30 FEET LENGTHS
4.1.8 Exclusion of either structural product produced from coil or structural product produced from an as-rolled structural product, if applicable: N/A
4.1.9 Heat treatment requirements: N/A
4.1.10 Testing for fine austenitic grain size is not required. .
4.1.11 Mechanical property test report is required.
Test report for each heat supplied is required IAW spec paragraph 14.
4.1.12 Special packaging, marking, and loading for shipment requirements are to be per spec paragraph 19.3. PER MIL-STD-129
4.1.13 Supplementary requirements checked below apply:
S1. Vacuum Treatment NOT REQUIRED S2. Product Analysis NOT REQUIRED S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons
NOT REQUIRED
S4. Additional Tension Test NOT REQUIRED S5. Charpy V-Notch Impact Test NOT REQUIRED S6. Drop-Weight Test (for Material 0.625 in. [16 mm] and over in Thickness)
NOT REQUIRED
S8. Ultrasonic Examination NOT REQUIRED S15. Reduction of Area Measurement NOT REQUIRED S18. Maximum Tensile Strength NOT REQUIRED
MATERIAL ORDERING DATA
ASTM-A6/A6M
S23. Copper-Bearing Steel (for improved atmospheric corrosion resistance)
NOT REQUIRED
S26. Subdivided Material—Marking of Individual Pieces NOT REQUIRED S27. Restrictive Plate Flatness NOT REQUIRED S28. Fine Grain Practice NOT REQUIRED S29. Fine Austenitic Grain Size NOT REQUIRED S30. Charpy V-Notch Impact Test for Structural Shapes: Alternate Core Location
NOT REQUIRED
S31. Maximum Carbon Equivalent for Weldability NOT REQUIRED S32. Single Heat Bundles NOT REQUIRED
4.1.14 End use, if there are any end-use-specific requirements: N/A
4.1.15 Special requirements, if any: N/A
4.1.16 Repair welding requirements, if any: N/A
Additional data requirements: All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Willie Leach
Code: C/244.4
File details come from the government source that posted it. Updated .