ASPEN DD FY27 Specification.pdf

USCGC ASPEN (WLB 208)

SPECIFICATION FOR DRYDOCK REPAIRS

FY2027

Developed By: GS- IBCTPL

(Rev-0, 01 October 2026)

USCGC ASPEN (WLB-225B) DRYDOCK AVAILABILITY FY2027

ii (Rev-0)

TABLE OF CONTENTS

Revisions Record ........................................................................................................................................... v Consolidated List of References ................................................................................................................... vi Consolidated List of Government-furnished Property ............................................................................ xviii Consolidated List of Critical Inspection Items ........................................................................................ xxiii Principal Characteristics ............................................................................................................................ xxv General Requirements WORK ITEM 1: Fire Prevention Requirements WORK ITEM 2: Hull Plating, U/W Body, Inspect WORK ITEM 3: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 4: Hull Plating, Freeboard, Ultrasonic Testing WORK ITEM 5: U/W Body, Preserve, 100 percent WORK ITEM 6: U/W Body, Preserve, Partial, Condition A WORK ITEM 7: U/W Body, Preserve, Partial, Condition B WORK ITEM 8: U/W Body, Preserve, Partial, Condition C WORK ITEM 9: Hull Plating Freeboard, Preserve, 100 Percent WORK ITEM 10: Appendages, U/W, Leak Test WORK ITEM 11: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 12: Appendages, U/W, Internal, Preserve WORK ITEM 13: Chain Lockers, Clean and Inspect WORK ITEM 14: Tanks, MP Fuel Stowage and Overflow, Clean and Inspect WORK ITEM 15: Voids, Non-Accessible, Leak Test WORK ITEM 16: Voids, Non-Accessible, Internal Surfaces, Preserve WORK ITEM 17: Tanks, MP Fuel Service, Clean and Inspect WORK ITEM 18: Tanks, Potable Water, Clean and Inspect WORK ITEM 19: Tanks, Ballast, Clean and Inspect WORK ITEM 20: Tanks, Dirty Oil and Waste, Clean and Inspect WORK ITEM 21: Main Reduction Gear, Overhaul WORK ITEM 22: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 23: Propulsion Shaft Seals, Mechanical Overhaul And Inflatable Renewal WORK ITEM 24: Propulsion Shaft Seals, Bulkhead, Overhaul WORK ITEM 25: Strain Gage Alignment, Check WORK ITEM 26: Propulsion Tail Shaft Sleeve, Skim Cut WORK ITEM 27: Propulsion Shaft Bearings, External, Check Clearances WORK ITEM 28: Propulsion Shaft Bearing, Stave Renewal WORK ITEM 29: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 30: Controllable Pitch Propellers, Clean and Inspect WORK ITEM 31: Controllable Pitch Propeller Hub, General Maintenance with EAL, Perform WORK ITEM 32: Controllable Pitch Propeller Hub, Remove and Reinstall WORK ITEM 33: Heat Exchangers, Clean, Inspect And Hydro WORK ITEM 34: Ship Service Diesel Generator, Clean and Inspect WORK ITEM 35: Emergency Diesel Generator, Clean & Inspect WORK ITEM 36: Fathometer Transducer, General Maintenance WORK ITEM 37: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM 38: Sea Strainers, Duplex, All Sizes, Overhaul WORK ITEM 39: Sea Strainers, Simplex, All Sizes, Clean and Inspect WORK ITEM 40: Sea Bay, Preserve - Partial WORK ITEM 41: Sea Bay, Clean and Inspect WORK ITEM 42: Sea Bay, Preserve 100% iii (Rev-0)

WORK ITEM 43: Rudders, Preserve, 100 Percent WORK ITEM 44: Rudder Stock Bearings, Check Clearances WORK ITEM 45: Rudder, Inspect And Repair WORK ITEM 46: Rudder and Rudder Stock, Remove and Inspect WORK ITEM 47: Rudder Bearings, Renewal WORK ITEM 48: Thruster Units (Bow And Stern), Overhaul WORK ITEM 49: Thruster Unit Bearings, Renew WORK ITEM 50: Thruster Generator, Clean & Inspect WORK ITEM 51: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test WORK ITEM 52: Hydraulic Chain Stoppers, Inspect and Service WORK ITEM 53: Crossdeck Winches, Inspect and Service WORK ITEM 54: Hydraulic Inhaul Winch, Inspect And Service WORK ITEM 55: Mechanical Chain Stoppers, Inspect and Service WORK ITEM 56: Anchor Windlass, Inspect and Service WORK ITEM 57: Anchor Chains and Ground Tackle, Inspect and Repair WORK ITEM 58: Anchor Chain and Ground Tackle, Preserve WORK ITEM 59: Anchors, Preserve WORK ITEM 60: Hawse Pipes, Preserve WORK ITEM 61: Warping Capstan, Inspect and Service WORK ITEM 62: Hull Fittings (Mooring and Towing), Inspect and Test WORK ITEM 63: Single Point Davit, Inspect and Service WORK ITEM 64: Welin Lambie Dual Point Davit TWPIV 5.0B, Inspect, Test, and Overhaul WORK ITEM 65: SORS Cargo Rail Remove WORK ITEM 66: Accessible Voids, Preserve, 100 Percent WORK ITEM 67: Tanks, Ballast, Preserve, 100 Percent WORK ITEM 68: Tanks, Ballast, Preserve, Partial WORK ITEM 69: Chain Locker, Preserve, 100 Percent WORK ITEM 70: Tanks, Dirty Oil and Waste, Preserve, 100 Percent, WORK ITEM 71: Tanks, Dirty Oil and Waste, Preserve, Partial, WORK ITEM 72: Accessible Void(s), Preserve, Partial, WORK ITEM 73: Tanks, Potable Water Preserve, 100 Percent WORK ITEM 74: Tanks, Potable Water, Preserve, Partial, WORK ITEM 75: Decks – Exterior (Buoy or Construction Deck), Preserve 100% WORK ITEM 76: Hull Plating Freeboard (Buoy Port Areas), Preserve WORK ITEM 77: Superstructure, Preserve, Partial WORK ITEM 78: Cathodic Protection, Zinc Anodes, Renew, WORK ITEM 79: Impressed Current Cathodic Protection System, Inspect and Maintain WORK ITEM 80: Impressed Current, Cathodic Protection System, Reference Cells, Renew WORK ITEM 81: Drydock WORK ITEM 82: Temporary Services, Provide - Cutter WORK ITEM 83: Sea Trial Performance, Support, Provide WORK ITEM 84: Main Reduction Gear Filter Assembly, Replace WORK ITEM 85: Decks - Exterior, Preserve, Non-Skid MIL-PRF-24667 System, WORK ITEM 86: Steering Gear Heat Exchanger, WORK ITEM 87: Anchor Pocket Modify WORK ITEM 88: Independent NACE Inspector (Level 3), Provide WORK ITEM 89: Tenting, Provide WORK ITEM 90: Portlight, Replace WORK ITEM 91: Pilothouse Window, Replace WORK ITEM 92: Compartment Deck, Preserve WORK ITEM 93: Buoy Deck D-Ring Renew iv (Rev-0)

WORK ITEM 94: Buoy Deck Quick Acting Watertight Door, Renew WORK ITEM 95: Deck Covering (Interior Wet/Dry), Renew WORK ITEM 96: Life Rails and Stanchions, Renew WORK ITEM 97: Steering Ram Seals, Renew WORK ITEM 98: Piping Insulation, Renew WORK ITEM 99: Forecastle Bulwark Repair WORK ITEM 100: Auxiliary Sea Water Pipe, Renew WORK ITEM 101: Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning WORK ITEM 102: Vent Ducts, Laundry Exhaust, Commercial Cleaning WORK ITEM 103: Buoy Crane, Appleton EB600-60-40, Inspect and Service WORK ITEM 104: Galley Pre-Heater, Renew WORK ITEM 105: Remote Cutoff Valve Operators, Renew WORK ITEM 106: Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean WORK ITEM 107: Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean WORK ITEM 108: Controllable Pitch Propeller, System Maintenance, Perform v (Rev-0)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK

ITEM#

CHANGES MADE

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

vi (Rev-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

«Drawings»

Coast Guard Drawing 225 WLB 184-001, Rev B, CRP-V850 Transducer Adapter Ring

Coast Guard Drawing 225 WLB 243-202, Rev C, Bulkhead Type Seal

Coast Guard Drawing 225 WLB 256-001, Rev P, Seawater Cooling System Diagram

Coast Guard Drawing 225 WLB 259-005, Rev C, Combustion Intake & Exhaust A&D Hull Block 940

Coast Guard Drawing 225 WLB 581-001, Rev E, Anchor Handling System Arrangement

Coast Guard Drawing 225 WLB 601-001, Rev M; General Arrangement Inboard & Outboard Profiles

Coast Guard Drawing 225 WLB 801-020, Rev B, Tank CAPACITY - 95% Curves

Coast Guard Drawing 225 WLBB 601-002, Rev G Booklet of General Drawings

Coast Guard Drawing 225B WLB 114-001, Rev C, Shell Appendages

Coast Guard Drawing 225B WLB 114-002, Rev -, Flow Accelerating Fin

Coast Guard Drawing 225B WLB 541-007, Rev D; Incinerator Fuel Oil Service Tank

Coast Guard Drawing 225B WLB 573-001, Rev E, Buoy Handling System Arrangement

Coast Guard Drawing 225B WLB 801-006, Rev D, Docking Drawing

Coast Guard Drawing 225B WLB 801-006, Rev G, Docking Drawing

Coast Guard Drawing 225B WLB 111-001, Rev A, Shell Expansion

Coast Guard Drawing 225B WLB 111-001, Rev A; Shell Expansion

Coast Guard Drawing 225B WLB 114-001, Rev C; Shell Appendages

Coast Guard Drawing 225B WLB 201-001, Rev D, Machinery Spaces Arrangement

Coast Guard Drawing 225B WLB 243-001, Rev J, Propulsion Shaft Arrangement

Coast Guard Drawing 225B WLB 243-001, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B WLB 243-002, Rev G, Stern Tube and Bearings A&D

Coast Guard Drawing 225B WLB 256-001, Rev M, Seawater Cooling System Diagram

Coast Guard Drawing 225B WLB 256-001, Rev P, Seawater Cooling System Diagram

Coast Guard Drawing 225B WLB 256-001, Rev R; Seawater Cooling Sys Diagram

Coast Guard Drawing 225B WLB 505-1, Rev D; General Requirements for Piping Systems

Coast Guard Drawing 225B WLB 512-001, Rev K, HVAC Diagram

Coast Guard Drawing 225B WLB 512-007, Rev B, HVAC A&D, Fr 66-92, Innerbttm & 1st Platform

Coast Guard Drawing 225B WLB 541-001, Rev G; Fuel Oil System Diagram vii (Rev-0)

Coast Guard Drawing 225B WLB 541-001, Rev J, Fuel Oil System Diagram

Coast Guard Drawing 225B WLB 549-001, Rev A, Onboard Lubrication Requirements

Coast Guard Drawing 225B WLB 556-001, Rev F, Hydraulic System Diagram

Coast Guard Drawing 225B WLB 556-001, Rev F, Hydraulic System Diagram

Coast Guard Drawing 225B WLB 556-005, Rev D, Aft Hydraulic System A/D, Fr 66 Aft, Block 950, 970

Coast Guard Drawing 225B WLB 561-001, Rev D, Steering Gear Hydraulic Diagram

Coast Guard Drawing 225B WLB 561-005, Rev E; Steering Gear Heat Exchanger Replacement

Coast Guard Drawing 225B WLB 562-002, Rev C; Rudder Structural A & D

Coast Guard Drawing 225B WLB 562-002, Rev D, Rudder Structural A&D

Coast Guard Drawing 225B WLB 573-002, Rev -, Weight Handling System Arrangement

Coast Guard Drawing 225B WLB 573-009, Rev E, Bi-Dir Ch Stopper With Retractable Roller Stopper

Coast Guard Drawing 225B WLB 573-012, Rev -, Rising Sheave Chain Stopper Ripout Incidental to Upgrade

Coast Guard Drawing 225B WLB 573-013, Rev B, Rising Sheave Chain Stopper Mechanical Mods Incidental to Upgrade

Coast Guard Drawing 225B WLB 573-014, Rev -, Rising Sheave Chain Stopper Hydraulic Mods Incidental to Upgrade

Coast Guard Drawing 225B WLB 573-11, Rev G, ATON Tie Downs

Coast Guard Drawing 225B WLB 581-001 Rev C, Anchor Handling System Arrangement

Coast Guard Drawing 225B WLB 581-001, Rev C, Anchor Handling System Arrangement

Coast Guard Drawing 225B WLB 582-001, Rev -, Mooring and Towing A & D

Coast Guard Drawing 225B WLB 601-001, Rev F, General Arrangement Inboard & Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev L; General Arrangement Inboard & Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev L; General Arrangement Inboard and Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev N; General Arrangement Inboard and Outboard Profiles

Coast Guard Drawing 225B WLB 601-001, Rev P, GENERAL ARRANGEMENTS INBOARD AND

OUTBOARD PROFILES

Coast Guard Drawing 225B WLB 601-002 Rev K, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev G, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev H, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev K, Booklet of General Drawings

Coast Guard Drawing 225B WLB 601-002, Rev L, Booklet off General Drawings

Coast Guard Drawing 225B WLB 633-001, Rev B, Cathodic Protection System Arrangement, Block Diagram, Wiring Deck Plan, and Elementary Diagrams

Coast Guard Drawing 225B WLB 633-002, Rev A; Cathodic protection passive

Coast Guard Drawing 225B WLB 635-001, Rev E, Hull, Thermal, & Acoustic Insulation Schedule

Coast Guard Drawing 225B WLB 672-001, Rev C, Storerooms, Cargo Stowage and Ship Store Arrangement and Details

Coast Guard Drawing 225B WLB 801-001, Rev A, Lines and Offsets

Coast Guard Drawing 225B WLB 801-003, Rev -, Curves of Forms and Cross Curves of Stability

Coast Guard Drawing 225B WLB 801-005, Rev A Tank CAPACITY - 95% Curves

Coast Guard Drawing 225B WLB 801-006, Rev C; Docking Drawing

Coast Guard Drawing 225B WLB 801-006, Rev G, Docking Drawing viii (Rev-0)

Coast Guard Drawing 225B WLB 801-6, Rev D; Docking Drawing

Coast Guard Drawing 225B WLB 901-003, Rev A, Hull Block 901 Block Assembly

Coast Guard Drawing 225B WLB 940-001, Rev E; Hull Block 940 - Modules

Coast Guard Drawing 225B WLB 940-001, Rev E; Hull Block 940 – Panels

Coast Guard Drawing 225B-WLB 233-1, Rev F, Propulsion Train Installation Drawing

Coast Guard Drawing 225B-WLB 243-1, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B-WLB 243-2, Rev G, Stern Tube and Bearing A & D

Coast Guard Drawing 225B-WLB 243-2, Rev G; Stern Tube and Bearing a & D

Coast Guard Drawing 225B-WLB 549-1, Rev -, Onboard Lubrication Requirements

Coast Guard Drawing 225B-WLB 556-1, Rev B, Hydraulic System Diagram

Coast Guard Drawing 225B-WLB 556-8, Rev C, CPP Hydraulic System Diagram

Coast Guard Drawing 225B-WLB 562-003, Rev -; Thordon Lower Rudder Stock Bearing

Coast Guard Drawing 225B-WLB 562-004, Rev -; Pintle Bearing

Coast Guard Drawing 225B-WLB 562-2, Rev D, Rudder Structural A & D

Coast Guard Drawing 225B-WLB 568-1, Rev A, Bow Thruster A & D

Coast Guard Drawing 225B-WLB 568-2, Rev A, Stern Thruster Arrangement and Detail

Coast Guard Drawing 225B-WLB 573-1, Rev -, Buoy Handling System Arrangement

Coast Guard Drawing 225B-WLB 573-2, Rev -, Weight Handling System Arrangement

Coast Guard Drawing 225B-WLB 611-1, Rev D, Lifting Pads - Main and Aux Machinery Room

Coast Guard Drawing 225B-WLB 111-001, Rev A, Shell Expansion

Coast Guard Drawing 225B-WLB 111-01, Rev A, Shell Expansion

Coast Guard Drawing 225B-WLB 201-2, Rev C, Access Removal Routes

Coast Guard Drawing 225B-WLB 233-001, Rev F, Propulsion Train Installation Drawing

Coast Guard Drawing 225B-WLB 243-001, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B-WLB 243-002, Rev G, Stern Tube and Bearing a & D

Coast Guard Drawing 225B-WLB 243-1, Rev J, Propulsion Shafting Arrangement

Coast Guard Drawing 225B-WLB 243-2, Rev G, Stern Tube and Bearing A & D

Coast Guard Drawing 225B-WLB 243-2, Rev G; Stern Tube and Bearing A & D

Coast Guard Drawing 225B-WLB 561-003, Rev B; Steering Gear Arrangement

Coast Guard Drawing 225B-WLB 561-003, Rev B; STEERING GEAR ARRANGEMENT

Coast Guard Drawing 225B-WLB 562-001, Rev H; Steering Components A/D

Coast Guard Drawing 225B-WLB 562-001, Rev H; STEERING COMPONENTS A/D

Coast Guard Drawing 225B-WLB 562-001, Rev J; STEERING COMPONENTS A/D

Coast Guard Drawing 225B-WLB 562-002, Rev D; Rudder - Struct A & D

Coast Guard Drawing 225B-WLB 562-002, Rev D; RUDDER - STRUCT A & D

Coast Guard Drawing 225B-WLB 562-003, Rev -; Thordon Lower Rudder Stock Bearing

Coast Guard Drawing 225B-WLB 562-004, Rev -; Pintle Bearing

Coast Guard Drawing 225B-WLB 581-01, Rev F, Anchor Handling System Arrgt

Coast Guard Drawing 225B-WLB 583-002, Rev E, MMA Installation of Dual Point Davit

Coast Guard Drawing 225B-WLB 601-001, Rev J, Gen Arr, Inboard and Outboard Profiles

Coast Guard Drawing 225B-WLB 601-01, Rev J, General Arr Inboard and Outboard Profiles ix (Rev-0)

Coast Guard Drawing 225B-WLB 601-01, Rev P, General Arr, Inboard and Outboard Profiles

Coast Guard Drawing 225B-WLB 631-02, Rev G, Painting Schedule

Coast Guard Drawing 225B-WLB 633-002, Rev A, Cathodic Protection Passive

Coast Guard Drawing 225B-WLB 801-013, Rev B, Midship Section & Typical Sections

Coast Guard Drawing 225B-WLB 801-015, Rev B, Scantling, Decks, & Platforms

Coast Guard Drawing 225B-WLB 801-016, Rev -, Scantlings, Watertight Bulkheads

Coast Guard Drawing 225B-WLB 801-15, Rev B, Scantlings, Decks & Platforms

Coast Guard Drawing 225B-WLB 801-17, Rev A, Scantlings, Superstructure

Coast Guard Drawing 225B-WLB 901-002, Rev D, Hull Block 901- Modules

Coast Guard Drawing 225B-WLB 901-02, Rev D, Hull Block 901 Modules

Coast Guard Drawing 225B-WLB 910-002, Rev D, Hull Block 910 – Modules

Coast Guard Drawing 225B-WLB 940-002, Rev E, Hull Block 940 - Modules

Coast Guard Drawing 225B-WLB-167-001, Rev M, Structural Closures

Coast Guard Drawing 225B-WLB-256-001, Rev U, Seawater Cooling System Diagram

Coast Guard Drawing 225B-WLB-256-004, Rev F, SW Cooling System FR 66 AFT Block 940, 950, &

Coast Guard Drawing 225B-WLB-320-001 Rev AK, Electrical One-Line Diagram

Coast Guard Drawing 225B-WLB-320-007 Rev N, Power Sys Deck Plan 02 Level & Above, Hull Block 960B, 975, & 970

COAST GUARD DRAWING 225B-WLB-320-1, REV AK, ELECTRICAL ONE LINE WIRING

DIAGRAM

Coast Guard Drawing 225B-WLB-508-001, Rev A, Thermal Insulation for Machinery, Equipment and Piping

Coast Guard Drawing 225B-WLB-597-051, Rev A, SORS Hold Stowage and Handling Fittings

Coast Guard Drawing 225B-WLB-601-001, Rev P, General Arrangements, Inboard & Outboard Profile

Coast Guard Drawing 225B-WLB-601-001, Rev P, General Arrangements, Inboard and Outboard Profiles

Coast Guard Drawing 225B-WLB-612-001, Rev M, Lifelines, Liferails & Stanchions

Coast Guard Drawing 225B-WLB-625-001 Rev D, Windows & Portlights

Coast Guard Drawing 225B-WLB-625-001 Rev D, Windows and Portlights

Coast Guard Drawing 225-WLB 568-202, Rev N, Bow & Stern Thruster

Coast Guard Drawing 225-WLB 111-01, Rev D, Shell Expansion

Coast Guard Drawing 225-WLB 201-2, Rev B, Access Removal Routes

Coast Guard Drawing 225-WLB 243-001, Rev B; PROPULSION SHAFTING ARRANGEMENT

Coast Guard Drawing 225-WLB 244-203, Rev E, Stern Tube Split Dovetail Carrier Casting

Coast Guard Drawing 225-WLB 561-001, Rev E, Steering Gear Hydraulics Diagram

Coast Guard Drawing 225-WLB 561-003, Rev F, Steering Gear Arrangement

Coast Guard Drawing 225-WLB 562-001, Rev L, Steering Components Arrangement and Detail

Coast Guard Drawing 225-WLB 581-01, Rev G, Anchor Handling System Arrgt

Coast Guard Drawing 225-WLB 583-004, Rev D, MMA Installation of Dual Point Davit

Coast Guard Drawing 225-WLB 601-001, Rev AC, General Arrangements Inboard and Outboard Profiles

Coast Guard Drawing 225-WLB 601-01, Rev AC, General Arr, Inboard and Outboard Profiles x (Rev-0)

Coast Guard Drawing 225-WLB 901-02, Rev E, Hull Block 901 Modules

COAST GUARD DRAWING 225-WLB-512-9, REV E, HVAC A&D FR 57-75 MAIN DECK & 01

LVL HULLBLOCK 960

Coast Guard Drawing 225-WLB-597-020, Rev B, SORS Hold Stowage and Rail System

Coast Guard Drawing FL 1204-003, Rev A, Welded Padeyes & Link

Coast Guard Drawing FL 1204-3. Rev A, Welded Padeyes and Links

Coast Guard Drawing FL 2605-031, Rev D, Mechanical Chain Stopper, 1-7/8" Buoy Chain

Coast Guard Drawing FL 2605-034, Rev D, Mechanical Chain Stopper Repair Kit: 1-7/8", 1-5/8" & 1- 1/4"

Coast Guard Drawing FL 7101-573, Rev L, Buoy Chain Winch Assy Model CW1

Coast Guard Drawing FL-1702-11, Rev -, Inspection of Sheaves

Coast Guard Fleet Drawing FL 2804-12, Rev -, U.S.C.G. Emblem

Coast Guard Fleet Drawing FL 2804-22, Rev-, Consolidated Visual ID for Cutters

NAVSEA Drawing 803-5001104, Rev -; Rudder Stock Bearings and Seals

NAVSEA Dwg 803-1385664, Bearings, Stern Tube & Strut

NAVSEA Dwg 803-2145807, Propulsion Shafting & Components

COAST GUARD PUBLICATIONS

«REF_A»

«TECHPUBS»Coast Guard Technical Publication (TP) CP-H5-0001-V0, Twin Pivot Arm Davit - TYPE TW.PIV 5.0B - Ref. No. 5558-l Thru 5558-15

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual

Coast Guard Drawing 225B WLB 633-001, Rev B, Cathodic Protection System Arrangement, Block Diagram, Wiring Deck Plan, and Elementary Diagrams

Coast Guard Technical Publication (TP) 10512, Section 573-A, July 2018, Buoy Handling Crane – Model

EB600-60-40

Coast Guard Technical Publication (TP) 11101, SWBS 583, Section A (SWBS 583A), Davit, Single Point Slewing Arm Model - RAD30 - 15.5 (BMD-710)

Coast Guard Technical Publication (TP) 3498, Section A, Jul 2015, Buoy Chain Winch

Coast Guard Technical Publication (TP) 3518, Oct 2007, MDE Model 3608/1

Coast Guard Technical Publication (TP) 3523, SWBS 241-B, Nov 2007, Reduction Gear - Model

96DHCMGH-CP

Coast Guard Technical Publication (TP) 3523-241-A&B, 225 WLB MIB, VOL 5, SWBS 241, GEAR, REDUCTION, MMC PN 241-01-01

Coast Guard Technical Publication (TP) 3523-242-A-C, 225 WLB MIB, SWBS 242, Coupling, Torsional, MMC PN 242-01-01 & 242-01-02

Coast Guard Technical Publication (TP) 3524, 2013, Manufacturer's Instruction Book-SWBS Group(s) 243-262

Coast Guard Technical Publication (TP) 3524, May 2009, Manufacturers Instruction Book, SWBS Group(s) 243-262, 225’ WLB Class Cutters, SWBS 243, Section A, Seal, Forward Stern Shaft, Manufacturer: John Crane, Model NO. MB Series, Rev. 1

Coast Guard Technical Publication (TP) 3524, SWBS 245-B, Aug 2005, Instruction Manual for the Model 102 B Class Controllable Pitch Propeller and Shafting System xi (Rev-0)

Coast Guard Technical Publication (TP) 3524, SWBS 245-B, May 2009, Propeller System, CPP - Model 110251007

Coast Guard Technical Publication (TP) 3524-244-A, 225 WLM MIB, SWBS 244-A, Bearing, Line Shaft, MMC PN 244-01-03, TP 244-A

Coast Guard Technical Publication (TP) 3524-245-A&B, 225 WLB, SWBS 245-A & 245-B, Propeller System, CPP, MMC PN 245-01-01,, 0

Coast Guard Technical Publication (TP) 3527B, Manufacturer's Information Book – SWBS Group(s) 310

Coast Guard Technical Publication (TP) 3537B, Manufacturer's Instruction Book – SWBS Group(s) 310

Coast Guard Technical Publication (TP) 3555, 21-May-1996, Steering Gear Systems

Coast Guard Technical Publication (TP) 3555, Apr 2008, Steering Gear Systems

Coast Guard Technical Publication (TP) 3556, Aug 2013, Manufacturer’s Instruction Book - SWBS Group(s) 568, Bow and Stern Thruster Units

Coast Guard Technical Publication (TP) 3556, Manufacturer’s Instruction Book-SWBS Group(s) 568, Bow and Stern Thruster – Model 125/3 STAY/FP

Coast Guard Technical Publication (TP) 3556, Manufacturer's Instruction Book – SWBS Group(s) 568

Coast Guard Technical Publication (TP) 3558, Apr 2008, Manufacturer’s Instruction Book-SWBS Group(s) 573, Section B, Cross Deck Winch – Model BMD-471

Coast Guard Technical Publication (TP) 3559, SWBS 581B, Anchor Windlass, P/S - Model BMD-478

Coast Guard Technical Publication (TP) 3559, Section 582B, Apr 2009, Aft Capstan, 21” - Model BMD-

Coast Guard Technical Publication (TP) 3574, Mar 2009, SWBS Group 633-638

Coast Guard Technical Publication (TP) 3574, May 1996, Manufacturer's Instruction Book-SWBS Group(s) 633-638

Coast Guard Technical Publication (TP) 3749, 26-APR-05, 1-7/8 Inch ATON Mechanical Chain Stopper

Coast Guard Technical Publication (TP) 3750, SWBS 573-A, Dec 2012, Rising Sheave Chain Stopper

Coast Guard Technical Publication (TP) 3796, Section A, Aug 2006, Galley Hood – Model NBDL-60 (13’-4”)

Coast Guard Technical Publication (TP) 5029, 01-NOV-03, S9243-Bx-MMC-010 - Bulkhead Shaft Seal

Coast Guard Technical Publication (TP) IB-H2-0002-V0, Nov 2024, ROPULSION SHAFTING AND

BEARINGS - MODEL 01-BCP, 587.55TS-94365A & 1K571500 - TECHNICAL MANUAL

Coast Guard Technical Publication (TP) IB-H2-0003-V0, Jan 2024, PROPELLER SYSTEM – CPP –

MODELS 102 & 110251007 – INSTRUCTION MANUALS

Coast Guard Technical Publication (TP) IB-H2-0003-V0, Nov 2024, PROPELLER SYSTEM – CPP –

MODELS 102 & 110251007 – INSTRUCTION MANUALS

Coast Guard Technical Publication (TP) IB-H2-0012-V0, 17-SEP-25, Manufacturer's Instruction Book- SWBS Group(s) 241-242

Coast Guard Technical Publication (TP) IB-H2-0012-V0, Sep 2025, REDUCTION GEAR MODELS

96DHCMG-CP & 96DHCMGH-CP OPERATING & MAITENANCE INSTRUCTIONS

Fire Prevention and Response

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation For Compartments Installation Details

NAVSEA Dwg 2803-980209, Plates, Label

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0450, 2020, Electrical Power for Contractor’s Tools & Equipment xii (Rev-0)

Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 3100, 2020, Inspect, Test and Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2014, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Latest Version, General Requirements

Surface Forces Logistics Center Standard Specification 0450 (SFLC Std Spec 0450), 2020, Electrical Power for Contractor’s Tools & Equipment

Surface Forces Logistics Center Standard Specification 0450 (SFLC Std Spec 0450), 2022, Electrical Power for Contractor's Tools & Equipment

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Requirements for Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes.

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 3100 (SFLC Std Spec 3100), 2020, Inspect, Test and Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 3100 (SFLC Std Spec 3100), 2022, Inspect, Test and Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2020, Clean Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), 2022, Fire Prevention and Response

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2014, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Auxiliary Machine Systems xiii (Rev-0)

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ships Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Preserve Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install Interior Deck Covering Systems

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install New Deck Covering Systems

Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2022, Drydocking

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2020, Temporary Services

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2014, Temporary Hull Accesses

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2020, Temporary Hull Accesses

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2022, Temporary Hull Accesses

OTHER REFERENCES

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Rev 7; Near-White Blast Cleaning

A-A-59323, Rev -; CLOTHS, CLEANING, LOW-LINT , 6/30/99

American Bureau of Shipping (ABS) Approved Chain, Accessory and Bar Manufacturing Facilities List, Oct 2016

American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2011, Disinfection of Water-Storage Facilities

American National Standards Institute/NSF International (ANSI/NSF) 61, 2008, Drinking Water System Components - Health Effects

American National Standards Institute/NSF International (ANSI/NSF) 61, 2015, Drinking Water System Components - Health Effects

American Society of Mechanical Engineers (ASME) B16.34, 2017, Valves-Flanged, Threaded, and Welding End

APM: If work is being done in DD, no cofferdam is needed; delete cofferdam protective measures paragraph 3.1.3 and above NAVSEA ref. Above NAVSEA ref is accessible on-line

ASTM International (ASTM) D1330, 2004, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2015, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1330, 2022, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D3359, 2009, Standard Test Methods for Measuring Adhesion by Tape Test xiv (Rev-0)

ASTM International (ASTM) D4138, 2013, Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

ASTM International (ASTM) D5363, 2008, Standard Specification for Anaerobic Single Component Adhesives (An)

ASTM International (ASTM) D5363, 2008, Standard Specification for Anaerobic Single Component Adhesives (AN)

ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component Adhesives (AN)

ASTM International (ASTM) F683, 2014, Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

ASTM International (ASTM) F992, 2006, Standard Specification for Valve Label Plates

ASTM International (ASTM) F992, 2017, Standard Specification for Valve Label Plates

Code of Federal Regulations (CFR) Title 29, Part 1910, Occupational Safety and Health Standards

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 40, Protection of the Environment

COMDTINST M10360.3C, Coatings and Color Manual

Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound; Anti-seize, Zinc Dust- Petrolatum

Commercial Item Description (CID) A-A-59588, 2013, Rubber Silicone

Commercial Item Description (CID), A-A-59323, Mar 2005, Cloths, Cleaning, Low-Lint

Commercial Item Descriptions (CID) A-A-59323, Rev A; Cloths, Cleaning, Low-Lint

Federal Specification (Fed Spec) QQ-N-281, Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) RR-C-271, Rev E, Dec 2010, Chain and Attachments, Welded and Weldless

Federal Specification (Fed Spec) RR-C-271, Rev E, Mar 2016, Chains and Attachments, Carbon and Alloy Steel

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2013 Edition, Pressure Testing Of Steel Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2017 Edition, Butterfly Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2018 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service

Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2013 Edition, Bronze Gate, Globe, Angle and Check Valves

MIL PRF-16173, Sep 2006, Corrosion Preventive Compound, Solvent Cutback, Cold-Application

MIL-A-18001, May 2005, Anodes, Sacrificial Zinc Alloy (Commercially Accepted - ASTM B418)

MIL-A-22262, Mar 1996; Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-C-24633, Oct 2014, Chain, Stud Link, Anchor, Low Alloy Steel, Flash Butt Welded

MIL-DTL-23549, Sep 2016, Grease, General Purpose

MIL-PRF-16173, 2006, Corrosion Prevention Compound, Solvent Cut-Back, Cold-Application xv (Rev-0)

MIL-PRF-16173, Sep 2006, Corrosion Preventive Compound, Solvent Cutback, Cold-Application

MIL-PRF-24176 , Oct 2004, Cement, Epoxy, Metal Repair And Hull Smoothing (Metric)

MIL-PRF-24176, 2004, Cement, Epoxy, Metal Repair and Hull Smoothing (Metric)

MIL-PRF-24647, 2013, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24647, Jun 2006, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24647, Jun 2006, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24667C, May 2008, Coating System, Non-Skid, for Roll, Spray, or Self-Adhering Application

MIL-PRF-9000, Rev H; Lubricating Oil, Shipboard Internal Combustion Engine, High Output Diesel, 9/16/87

MIL-S-16059, Apr 1961, Shafting, Flexible (Core and Casing Complete) (For the Remote Operation of Valves)

MIL-S-22473 , Rev E(8); Sealing, Locking, and Retaining Compounds: (Single Component), 01/21/04

MIL-S-45180, 1998, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant

MIL-S-45180, 1998; Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant

Naval Sea Systems Command (NAVSEA) S9243-AW-TRS-011, Surface Ships Main Propulsion Shafting Refurbishment Procedures, Volume I, Part 1

Naval Sea Systems Command (NAVSEA) S9243-AW-TRS-012, Surface Ships Main Propulsion Shafting Examination, Test and Repair Action Record, Volume 1, Part 2

Naval Sea Systems Command (NAVSEA) Underwater Ship Husbandry Manuals (UWSH) S0600-AA- PRO-160, Nov 2011, Chapter 16, Cofferdams

Naval Sea Systems Command (NAVSEA) Underwater Ship Husbandry Manuals (UWSH) S0600-AA- PRO-160, Nov 2011, Chapter 16, Cofferdams

Naval Ships' Technical Manual, Chapter 241, Propulsion Reduction Gears, Couplings, Clutches, and Associated Components

NAVSEA Drawing 804-5959214, Rev-, Piping Insulation - Installation Details

NAVSEA OP 4, Thirteenth Revision, May 2023, Ammunition and Explosives Safety Afloat

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure

ODOM Echotrac DF3200 MKII, Rev 2, Technical Manual

QPL-24667, Qualified Product List (Military) of Products Qualified Under Detail Specification MIL- PRF-24667, Coating System, Non-Skid, for Roll, Spray, or Self-Adhering Application

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2013, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183B, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183B, 2019, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) G-6032, 2020 Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric xvi (Rev-0)

Society of Automotive Engineers (SAE) AMS-G-6032, August 2020, Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 1 (SSPC-SP 1), 2016, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 11 (SSPC-SP 11), 2007, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2015, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2016, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2004, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2013, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), Power Tool Cleaning)

The Society for Protective Coatings (SSPC), January 2015, Paint Application Specification No. 2 (PA-2), Procedure for Determining Conformance to Dry Coating Thickness Requirements

The Society for Protective Coatings (SSPC), Paint Application Specification No. 2 (PA-2), Procedure for Determining Conformance to Dry Coating Thickness Requirements

The Society for Protective Coatings (SSPC), SSPC-SP 1/No. SP-1, Solvent Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 10/NACE No.2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 6/NACE No. 3, 2007, Commercial Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 7/NACE No.4, 2007, Brush-Off Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-2/NACE WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-4/NACE WJ-4, 2012, Waterjet Cleaning of Metals – Light Cleaning

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP 10/NACE No.2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, 2004, Near-White Blast Cleaning xvii (Rev-0)

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 12/NACE No. SSPC-SP 12/NACE No.5, Surface Preparation and Cleaning of Steel & Other Hard Materials by High and Ultrahigh Pressure Water Jetting Prior to Recoating

The Society for Protective Coatings (SSPC)-SP 3, Power Tool Cleaning, 11-1-2004

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Jan 2007, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 11, Jul 2012, Power Tool Cleaning to Bare Metal

This reference is only applicable if paragraph 3.7.2 is required.

xviii (Rev-0)

CONSOLIDATED LIST OF GOVERNMENT-FURNISHED PROPERTY

The following is a list of property, which the Government will furnish. This list supersedes any other material obligations indicated or implied by referenced drawings.

WORK

ITEM

MTI ITEM DESCRIPTION NSN/PN QTY ESTIMATED

COST

($/UNIT)

21 N USCG 225 MRG

Service Kit 3020-01-F20-5954 1 ea. 184,871

21 N **Complete Turning Gear

Philadelphia Gear Drawing

01070-0353 (NIIN:01-F19-

5931)

1 ea. 30,000

22 Y **Propeller shaft NSN: 2010-01-399-5912 1ea. 165,000 22 N **Grounding Silver

Strip NSN: 5340-01-126-4569 1ea. 1,889

22 N **SST Straps NSN: 5340-01-126-4570 4ea. 28 22 N **SST Bailing Seals NSN: 5330-01-284-3686 4ea. 6 22 N Reduction Gear LS shaft aft seals (36000- 1231)

NSN: 5330-01-407-8055 2ea. 368

23 N 225' WLB Major Overhaul Kit

NSN: 5330-01-520-5284 1 ea. 67,931.41

23 N **225' WLB Seat (Split)

NSN: 5330-01-645-3665 1 ea. 17,913.71

23 Y *Seal Compression Tool

Onboard Tool 1 ea. 200.00

24 N **Oversized shaft seal diaphragm (Main Prop

Shaft)

NSN: 2010-01-537-2301 2 ea. 9,828.00

24 N **Oversized shaft seal diaphragm (PTO shaft)

PN: H74265-01-3 1 ea. 4,250.00

24 N **Entire New Seal (Main Prop Shaft)

NSN: 2040-01-393-7061 2 ea. 18,883.00

31 Y **Blade Bolts NSN: 5306-01-410-6893 4 ea. 1,854.12 31 N Blade Bolt O-rings NSN: 5330-01-408-7251 PN:

0-3-2-1 48 ea. 2.25

31 N Blade Seal NSN: 5331-01-623-0621 PN:

2-472 KA174-75

4 ea. 55.00

31 Y *Lifting Device, Propeller Blade

NSN: 2020-01-F02-6825 1 ea. 100.00

32 N Item #9, Flange Bolt NSN: 5306-01-515-9158 2 ea. 1306.38 36 N *** Fathometer

Transducer, shallow water, 50-200 kHz

(Airmar Technology

SS505)

NSN: 5845-01-518-7231 PN:

SS505

2 ea. 343.63

36 Y ***Fathometer Transducer, Deep

Water, 24kHZ

NSN: 5845-01-496-9770 PN:

TH28/20-41-516CG

1 ea. $7,709.21 xix (Rev-0)

46 N **Upper bearing NSN: 3110-01-466-9924 1 ea. 10,525.45 46 N Rudder Seal Kit NSN: 5330-01-565-8083 1 ea. 2,433.76 47 N Lower bearing NSN: 3120-21-912-7635 1 ea. 6,661.26 47 N Pintle bearing NSN: 3120-21-912-7634 1 ea. 3,380.38 48 N Seal Kit, Thruster NSN: 2010-01-555-9048 2 ea. 4376.00 48 N Anode, Zinc NSN: 5365-01-495-5350 18 ea. 113.75 48 N **Seal Spacer

(B125SM44178)

NSN: 2010-01-495-6823 2 ea. 700.00

48 N **Shaft Sleeve NSN: 2010-01-495-2638 2 ea 5702.40 49 Y Seal 5330-01-495-3435 5 ea.

49 N Bearing, Roller, Tapered 3110-01-495-3354 1 ea.

49 N Bearing, Roller, Tapered

3110-01-495-3344 1.ea.

49 N Bearing, Roller, Tapered

3110-01-495-3334 1 ea.

49 N Bearing, Roller, Tapered

3110-01-495-3465 1 ea.

52 N Repair Kit, HYD Chain Stopper Rising Sheave (for Para. 3.2, Tasks #2 and #3)

NSN: 2040-01-483-3947 2 ea. 2,631.46

52 N Cylinder, Actuating Linear

NSN: 3040-01-483-3373 4 ea. 1,777.71

53 N Hand Pump SS NSN: 4320-01-517-1444 1 ea 1,499.66 53 N Pressure Gauge -

Model BMD-471 NSN: 6685-01-437-2519 4 ea 43.79

53 N Wire Rope Assembly NSN: 4010-01-643-2077 4 ea 900.00 53 N Hydraulic Brake

Repair Kit - Model

BMD-471

NSN: 3950-01-526-9090 4 ea. 913.00

53 N Counterbalance Valve

- Model BMD-471

NSN: 4810-01-353-0586 4 ea. 150.00

53 N Shuttle Valve - Model

BMD-471

NSN: 4820-01-317-2748 4 ea. 35.00

53 N Hydraulic Motor Seal Kit - Model BMD-471

NSN: 5330-01-475-4566 8 ea. 84.00

53 N Clutch Shoe - Model

BMD-471

NSN: 4910-01-475-4125 4 ea. 56.90

53 N Drum Bushing - Model

BMD-471

NSN: 3950-01-631-0884 8 ea. 272.00

53 N Shaft Bushing - Model

BMD-471

NSN: 3950-01-631-0771 4 ea. 298.00

53 N Gearbox Seal Kit (For Winch Gearbox

Assemblies) - Model

BMD-471

NIIN: XFC343225 PN: YMD-

8194-R

4 ea. 70.00

53 N Control Station Repair Parts. Kit

NSN: 6110-01-644-9898 4 ea. 438.00 xx (Rev-0)

53 N Flag Block Pivot Bearing

NSN: 3110-01-644-9905 4 ea. 675.00

53 N Flag Block Bearing Cup, Sheave

NSN: 3110-01-644-9670 4 ea. 231.00

53 N Flag Block Bearing Cone, Sheave

NSN: 3110-01-013-4036 4 ea. 182.00

53 N Seal NSN: 5330-01-287-2826 4 ea. 104.00 53 N Manifold Repair Kit PN: YMD-8192-R 4 ea. 551.00 54 N Roller bearing Unit NSN: 3130-01-504-4363 2 ea. 4,012.00 54 N Grease seal NSN: 5330-01-462-5544 4 ea. 79.25 54 N Level wind pivot bushing NSN: 3120-01-621-2293 1 ea. 1,139.00

54 N Level wind thrust bearing

NSN: 3120-01-621-2300 2 ea. 483.30

54 N Rexroth DCV NSN: 4810-01-507-0037 1 ea. 208.29 54 N Rexroth Sandwich

Flow Control NSN: 4810-01-505-9289 1 ea. 250.00

54 N Sun Sandwich Relief Valves

NSN: 4820-01-439-2451 2 ea. 900.00

54 Y Level Wind Hydraulic Cylinder

NSN: 3040-01-441-3721 1 ea. 7,423.00

54 N 3:1 Pilot Ratio, Vented Counterbalance Valve

Assembly

NSN: 4820-01-563-5841 1 ea 98.70

54 N Fully Adjustable Needle Valve

NSN: 4820-01-416-0579 1 ea 48.75

54 N Wire Rope Assembly NSN: 4010-01-646-6972 1 ea. 500.00 54 Y **Hydraulic Motor NSN: 4320-01-445-2248 1 ea 23,998 54 N **Pump, Hydraulic

Ram, Hand Driven NSN: 4320-01-286-4065 1 ea. 419.77

54 N **Cylinder Pin NSN: 5315-01-515-9847 1 ea 500.00 54 N **Cylinder Pin NSN: 5315-01-515-9912 1 ea 520.00 55 N Hardware Kit, Pins NSN: 2030-01-485-7209 2 ea. 528.47 55 N Hardware Kit, Mechanical NSN: 2030-01-485-7215 2 ea. 538.91

63 N Swing Brake Seal Kit NSN: 5330-01-390-3514 PN:

90-016-2011

2 ea 68.45

63 N Swing Brake Disc Kit NSN: 3010-01-464-1040 PN:

90-016-2131

2 ea 187.20

63 N Swing Holding Valve NSN: 4820-01-466-4918 PN:

CBEA-LHV-YHL (Sun

Hydraulics)

1 ea 251.50

63 N Wire Rope Assembly NSN: 4010-01-620-9604 PN:

JWCG062100PL

1 ea 660.00

64 N 4 Year Davit In-Place Overhaul Kit

NSN: 3950-01-F18-5354 P/N:

892-02053

1 ea. 130,816.35

64 Y Cylinder Assembly NSN: 3040-99-239-4845 P/N:

5727-1501

2 ea. 20,718.88

64 Y Hook, Release, Boat NSN: 4030-01-467-1005 P/N: 2 ea. 5,858.19 xxi (Rev-0)

Davit APR-356-CBH 64 Y Accumulator, Complete Assembly

NSN: 3040-99-355-4929 P/N:

885-02012 2 ea. 13,750.83

80 N Reference electrode, silver & silver chloride

Siemens Water Technologies W3T105012

(Electrocatalytic 32622)

NSN: 5977-01-346-0750 2 ea. 1,300.02

81 Y *Transducer Cover Plate

N/A 4 ea. 50.00

84 N WLB MRG Filter Assembly

4330-01-F21-6384 1 ea. 21,199.80

91 N Window, Fixed, Heated, 42†W x

72†H, FN 2 & 12

01-413-0480 KS-28029-12 4 ea. $8100

91 N Window, Fixed, Heated, 54†W x

36†H, FN 3

01-413-0459 KS-28029-3 2 ea. $5000

91 N Window, Fixed, Heated, 36†W x

36†H, FN 4

01-413-3362 KS-28029-4 2 ea. $4500

91 N Window, Hinged, Heated, 42†W x

44†H, FN 5

01-477-5515 KS-28938-9 2 ea. $9000

91 N Window, Fixed, Heated, 42-1/4†W x

28†H, FN 8P

01-477-2007 KS-28945-8P 1 ea. $4000

91 N Window, Fixed, Heated, 42-1/4†W x

28†H, FN 8S

01-477-2353 KS-28946-8S 1 ea. $4000

91 N Window, Fixed, Heated, 42†W x

44†H, FN 10

01-412-9679 KS-28029-10 2 ea. $5000

93 Y Coast Guard (C-G) CGDR50T01 D-Ring w/ Strap, Rated Load

12,300 lbs.

NSN 5365-01-612-1273 13 $40.55

94 N Quick Acting Watertight Steel Door 36†x66†, Left

Hand, 10 Dog w/ hasp and staple. 9†diameter fixed light

1 ea. $5000

97 N Steering Ram Seal Kit

APL: 52981530A1

P/N SKN5-660-32-ABS 2 Steering Room

103 N Main Fall Wire Rope NSN: 4010-01-486-0047 PN:

JWCG13001919PL

1 2,642.00

103 N Aux Fall Wire Rope NSN: 4010-01-594-2228 PN: 1 805.32 xxii (Rev-0)

JWCG75200637PL

104 N Indeeco Heater Duct TFZU

61.5 K, 36-In X 18-In

with built in 24

VDC

toggle switch

1 ea.

108 N Stat-O-Seal Washers NSN: 5310-01-212-5987

PN: 0-4-3-5

12 ea. 55.61

108 N O-Ring, Hub Flange

Bolt Cover

NSN: 5331-00-983-9878

PN: 0-2-2-5 12 ea.

50.00

*Government-loaned property, which shall be returned to the vessel upon completion of the availability.

**New or refurbished equipment that the Government may provide for installation in place of existing equipment.

***Government-furnished property, which is to be supplied by either the vessel or the C4IT ServiceCenter xxiii (Rev-0)

CONSOLIDATED LIST OF CRITICAL INSPECTION ITEMS

The following is a list of work items, which contain Critical Inspection reports, which the Contractor must complete within the first 25% of the availability contract period (see SFLC Std Spec 0000, paragraph 3.2.6.5 (Inspection report particulars)):

Work Item

Title

3 Hull Plating, U/W Body, Ultrasonic Testing

5 U/W Body, Preserve, 100 percent

10 Appendages, U/W, Leak Test

13 Chain Lockers, Clean and Inspect

14 Tanks, MP Fuel Stowage and Overflow, Clean and Inspect

15 Voids, Non-Accessible, Leak Test

17 Tanks, MP Fuel Service, Clean and Inspect

19 Tanks, Ballast, Clean and Inspect

22 Propulsion Shafting; Remove, Inspect, and Reinstall

23 Propulsion Shaft Seals, Mechanical Overhaul And Inflatable Renewal

24 Propulsion Shaft Seals, Bulkhead, Overhaul

27 Propulsion Shaft Bearings, External, Check Clearances

30 Controllable Pitch Propellers, Clean and Inspect

31 Controllable Pitch Propeller Hub, General Maintenance with EAL, Perform

38 Sea Strainers, Duplex, All Sizes, Overhaul

39 Sea Strainers, Simplex, All Sizes, Clean and Inspect

41 Sea Bay, Clean and Inspect

44 Rudder Stock Bearings, Check Clearances

45 Rudder, Inspect And Repair

46 Rudder and Rudder Stock, Remove and Inspect

50 Thruster Generator, Clean & Inspect xxiv (Rev-0)

52 Hydraulic Chain Stoppers, Inspect and Service

53 Crossdeck Winches, Inspect and Service

54 Hydraulic Inhaul Winch, Inspect And Service

55 Mechanical Chain Stoppers, Inspect and Service

56 Anchor Windlass, Inspect and Service

57 Anchor Chains and Ground Tackle, Inspect and Repair

61 Warping Capstan, Inspect and Service

63 Single Point Davit, Inspect and Service

64 Welin Lambie Dual Point Davit TWPIV 5.0B, Inspect, Test, and Overhaul

66 Accessible Voids, Preserve, 100 Percent

72 Accessible Void(s), Preserve, Partial, 79 Impressed Current Cathodic Protection System, Inspect and Maintain

81 Drydock

90 Portlight, Replace

91 Pilothouse Window,…