CDP_Armed Security SOW (Draft 07.30.26).pdf

PDF 796 KB Posted

Attached to
Armed Security Guard services
Solicitation number
Armed_Guard_Security_Services_2027
Issued by

About this file

This is a Statement of Work (SOW) for Armed Security and Alarm Monitoring Services for the Federal Emergency Management Agency's Center for Domestic Preparedness (CDP) located in Anniston, Alabama. The contract requires 24/7 armed security services across a 250-acre, seven-enclave campus comprising 53 buildings totaling over 1,000,000 square feet. The contractor must provide armed security officers, shift supervisors, alarm monitoring dispatch officers, and management personnel to perform security checks, access control, emergency response, traffic control, facility rule enforcement, security system monitoring, and lock and key control. The contractor shall maintain staffing across three shifts (0600-1400, 1400-2200, 2200-0600) with overlap periods, roving patrols, and static posts at designated locations including the CDP Headquarters, Advanced Responder Training Complex, Responder Lodging Complex, Noble Training Hospital, and Chemical, Ordnance, Biological, and Radiological Training Facility.

Personnel must be U.S. citizens meeting Moderate Risk Public Trust Suitability requirements with Tier 2 background investigations. Armed Security Officers require high school diplomas, two years of prior military/law enforcement/security experience (preferred), valid firearms qualifications under Alabama Peace Officer Standards and Training Commission standards (70% minimum score on sidearm and shotgun courses, valid six months), medical and physical fitness certifications, CPR certification, and Alabama Security Regulatory Board licensing. Key personnel include a Project Manager (four-year degree or equivalent law enforcement/security management experience), Deputy Project Manager, Training Manager (two-year degree with three years adult-level security training experience, Certified Trainer Level 2), and Key Control/Administrative Officer. The contractor must develop comprehensive quality control plans, safety programs including job hazard analyses, security training (Unauthorized Disclosure, OPSEC, Insider Threat), drug screening and awareness programs, and standard operating procedures. The period of performance includes a one-month phase-in period followed by an 11-month base period with four 12-month option periods (5 years total). All contractor-furnished items include uniforms, equipment, vehicles, training, and licenses; government furnishes facility access, vehicles, and certain equipment. Monthly progress reports are due by the 10th of each month following the reporting period.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Learn more at fema.gov June 2026

Federal Emergency Management Agency

STATEMENT OF WORK (SOW) FOR:

Armed Security and Alarm Monitoring Services

Gary Topper, Contracting Officer

Table of Contents

Table of Contents 2

1. General

1.1 Scope

1.2 Background

1.3 Objective

1.4 Required Staffing Levels

1.5 Commercial Advertising

1.6 Procedures for Payment

1.7 Collective Bargaining Agreement (CBA) Compliance

1.8 Reference Documents

1.9 Definitions

1.10 Agency Acronyms

2. Tasks

2.1 Security Checks

2.2 Access and Egress Control

2.3 Perform as a Primary Security Response

2.4 Traffic Control

2.5 Enforce Facility Rules and Regulations

2.6 Monitor Security Systems and Fire Alarms

2.7 Lock and Key Control

2.8 Management and Supervision Requirements

3. Personnel

3.1 Qualified Personnel

3.2 Key Personnel

3.3 Employee Qualifications

3.4 Firearms Qualification Standards

3.5 Medical and Physical Fitness Standards

3.6 Employee Identification

3.7 Employee Conduct

3.8 Dress Code

3.9 Grooming Standards

3.10 Removing Employees for Misconduct or Security Reasons

4. Other Applicable Conditions

4.1 Period of Performance

4.2 Post Award Conference/Kick-Off Meeting

4.3 Place of Performance

4.4 Hours of Operation

4.5 Work Control

4.6 Security

4.7 Safety

4.8 Quality

4.9 Records and Reports

4.10 Meetings

4.11 Business Continuity Plan

4.12 Emergency Planning, Response, and Recovery

4.13 Special Events and Functions

4.14 Government Acceptance Period

5. Government Furnished Resources

5.8 Government-Furnished Equipment and Materials

5.9 Government Furnished Vehicles

5.10 Government-Furnished Facilities

5.11 Government-Furnished Services

6. Contractor Furnished Property and Training

6.8 Uniforms, Equipment, Software and Items to be furnished by the Contractor . 54

6.9 Contractor-Furnished Training

7. Additional Contract Compliance Language

7.1 HSAR 3052.240-72 Safeguarding of Controlled Unclassified InformationError! Bookmark not defined.

7.2 HSAR 3052.240-73 Notification/Credit Monitoring Required for PII Incidents 71

7.3 FAR 52.224-3 Privacy Training – Alternate 1 (Deviation)

7.4 Information Technology Security Awareness TrainingError! Bookmark not defined.

7.5 Information Sharing

7.6 Records Management Obligations

7.7 HSAR 3052.204-71 Contractor Employee Access .. Error! Bookmark not defined.

7.8 Section 504 Compliance

7.9 Energy Conservation Program

7.10 Combating Trafficking in Persons

Appendices

Appendix A: Task List - ISC Best Practices for Armed Security Officers

Appendix B: APOSTC Firearms Qualification Course of Fire

Appendix C: Medical and Physical Fitness Standards for Armed Security Officers

Appendix D: Uniformed Personnel Grooming Standards

Appendix E: List of Contractor Provided Uniform Items

Appendix F: List of Government Furnished Equipment

Appendix G: New Employee and Annual Refresher Training Requirements

Statement of Work (SOW) CDP Armed Security and Alarm Monitoring Services

1. General

1.1 Scope

The intention of this requirement is to obtain contracted armed security and alarm monitoring services to the Department of Homeland Security (DHS), Federal Emergency Management Agency (FEMA), Center for Domestic Preparedness (CDP) and its facilities located in Anniston, Alabama. The resulting contract will require armed security and alarm monitoring services and supervision on a twenty-four (24) hour per day, seven (7) days per week basis. The Contractor shall provide all services as identified in this statement of work.

The CDP campus is comprised of seven different enclaves : (1) CDP Headquarters Main Complex (Building 61), (2) CDP Advanced Responder Training Complex (ARTC) (Building 640) (3) CDP Responder Lodging Complex (RLC), (4) CDP Warehouse Complex (Building 40),

(5) the Noble Training Hospital (NTH), (6) the Applied Learning Experiential Responder Training Complex (ALERT Building), and (7) the Chemical, Ordnance, Biological, and Radiological Training Facility (COBRATF). In total the campus is comprised of 53 buildings totaling more than 1,000,000 square feet, located on 250 noncontiguous acres in Anniston, Alabama.

This document is intended as a Statement of Work (SOW). Some tasks required are of a general security-oriented nature while other tasks are specific and must be executed exactly as required in certain circumstances outlined by applicable procedures.

1.2 Background

The Center for Domestic Preparedness provides advanced, all-hazards training to approximately 60,000 emergency responders annually from state, local, tribal, and territorial governments, as well as the federal government, foreign governments, and private entities. The scope of training includes preparedness, protection, and response.

Since it opened its doors in 1998, the CDP has trained more than 1.3 million responders. Responders in 17 different disciplines – Emergency Management, Emergency Medical Services, Fire Service, Governmental Administrative, Hazardous Materials, Healthcare, Law Enforcement, Public Health, Public Safety Communications, Public Works, Agriculture, Education, Citizen/Community Volunteer, Information Technology, Security and Safety, Search and Rescue, and Transportation – have trained at the CDP. The CDP provides training most responders cannot get at their home agencies.

At its Chemical, Ordnance, Biological, and Radiological Training Facility (COBRATF), the CDP offers the only program in the nation featuring civilian training exercises which use toxic chemical agents and biological materials (i.e. Sarin, VX, anthrax and ricin). The advanced hands-on training enables responders to respond effectively to real-world incidents involving chemical, biological, explosive, radiological, and other hazardous materials.

The Noble Training Hospital at the CDP is the only hospital facility in the United States dedicated solely to training hospital and healthcare professionals in disaster preparedness and response. The facility includes classrooms, exercise and simulation areas, an emergency operations center, emergency department, clinical ward, and an isolation ward for ‘patients’ with highly infectious diseases.

Training at the CDP’s Advanced Responder Training Complex (ARTC) prepares responders to deal with a wide range of man-made and natural hazards in settings commonplace in communities across the nation. Among other things, the ARTC has an industrial park, a mock subway station, and a simulated street scene with offices, businesses and warehouses.

The Responder Lodging Complex at the CDP is composed of renovated former Army barracks that serve as the official, federally-provided housing for first responders and healthcare professionals attending CDP training. Each trainee enjoys a private room and shares a bathroom with an adjacent neighbor.

1.3 Objective

The objective of this procurement action is to obtain reliable, efficient and effective armed security and alarm monitoring services to safeguard CDP students, federal and contract staff, visitors and CDP property by applying sound management and techniques that will provide the best value to the government.

1.4 Required Staffing Levels

1.4.1 The required staffing levels are as follows:

Building 61 (HQ) Hours Manned Front Guardhouse Static 24/7 Badging Static M-F 0600-1800 Rear Guardhouse Static M-F 0600-1800 Front Lobby Static M-F 0600-1800 Rover M-F 0600-1800

Faith Wing Static M-F 0600-1800

Responder Lodging Static 24/7 Rover 24/7 Rover 24/7 Rover W-Su 1800-0200

COBRATF

CTF Supervisor 24/7 Rover 24/7 Rover 24/7 Static M-F 0600-1800

Noble Training Hospital

Rover 24/7 CDP Supervisor 24/7

AMDO 24/7

AMDO 24/7

Key Personnel Project Manager M-F 0800-1630 Deputy Project Manager M-F 0800-1630 Training Manager M-F 0800-1630 Administrative Assistant M-F 0800-1630

1.4.2 The Contractor shall ensure a sufficient number of Armed Guards, Badging Officers, Alarm Monitor Dispatch Officers, and Shift

Supervisor positions are on duty to fulfill all requirements of this contract.

1.4.3 Work shall be divided into three (3) shifts, with guards on duty at all specified locations at all times.

1.4.4 Shift hours shall be 0600-1400, 1400-2200, and 2200-0600. Shifts shall overlap by fifteen (15) minutes. All posts shall start and end on the hour; however, each shift shall include fifteen (15) minutes of overtime per officer for shift change.

1.4.5 The fifteen (15) minutes of overtime shall begin prior to the actual shift start time.

1.4.6 Duties, posts, assignments and shift times are subject to change at the discretion of the Government.

1.4.7 Armed Security Officers may be assigned to any security post on campus, including but not limited to NTH, COBRATF, RLC, Building 61, or other designated locations.

1.4.8 Supervisors shall be assigned and on duty twenty-four (24) hours per day, seven (7) days per week. Supervisors’ authority applies campus wide. Supervisors may be assigned to perform supervisory duties at any campus location.

1.4.9 Alarm Monitor Dispatch Officers shall be assigned and on duty on each shift in the designated CAMS office, twenty-four (24) hours per day, seven (7) days per week.

1.4.10 Roving positions shall augment security efforts at those campus locations without static coverage.

1.4.11 Roving positions shall provide relief to static positions for breaks and meals.

1.5 Commercial Advertising

The contractor shall not refer to award of this contract in commercial advertising in such a manner as to state or imply that the service provided is endorsed or preferred by the federal government or is considered by the government to be superior to other services.

1.6 Procedures for Payment

All Billing and Payment associated with this contract shall be accomplished by providing the invoice to:

FEMA-Finance-Vendor-Payments@fema.dhs.gov Federal Emergency Management Agency FEMA Finance Center ATTN: Vendor Payments, 540-504-1899 P.O. Box 9001 Winchester, VA 2260

1.7 Collective Bargaining Agreement (CBA) Compliance

1.7.1 Any collective bargaining agreement (CBA) entered into by the Contractor that covers employees performing work under this contract shall not conflict with, and must comply with, all applicable terms, conditions, and requirements of this government contract. In the event of any conflict between the CBA and the terms of this contract, the terms of this contract shall take precedence to the extent permitted by law.

1.7.2 The Contractor shall ensure that all provisions of any applicable CBA are consistent with the performance, security, and operational requirements set forth in this contract. The Contractor shall remain fully responsible for contract performance and shall not use the existence of a CBA as a basis for noncompliance with any contract requirements.

mailto:FEMA-Finance-Vendor-Payments@fema.dhs.gov

1.7.3 The Contractor shall immediately notify the Contracting Officer of any actual or potential conflict between the CBA and the requirements of this contract.

1.7.4 The Contractor shall comply with all applicable terms and conditions of any collective bargaining agreement (CBA) covering employees performing work under this contract. The Contractor is responsible for ensuring that all wages, benefits, working conditions, and other employment terms required by the CBA are fully implemented and maintained for the duration of the contract.

1.7.5 The Contractor shall promptly notify the Contracting Officer of any actual or potential labor disputes or grievances that may affect contract performance. Failure to comply with the applicable CBA may be considered a material breach of contract and may result in remedies up to and including termination for default.

1.8 Reference Documents

18 US Code 1028 – Identity Theft

28 Code of Federal Regulations, Part 17

29 CFR 1910 (General Industry)

36 CFR Chapter XII, Subchapter B

41 U.S.C. 6701–6707 (Service Contract Act)

42 U.S.C. § 12101 et seq.

44 U.S.C. § 3551 et seq.

29 U.S.C. § 794

Alabama Administrative Code Section 34 Chapter 27C Alabama Security Regulatory Board

Alabama Criminal Code Sections 13A-3-23 and 13A-3-27

Americans with Disabilities Act (ADA)

Army Regulation 190-17 Biological Select Agents and Toxins Security Program

CDP Chemical Surety Program Standards Document

Chemical, Ordnance, Biological, and Radiological Training Facility (COBRATF) Physical Security Plan and Guard Order Addendum

Chemical, Ordnance, Biological, and Radiological Training Facility (COBRATF) Standards Document

Department of Homeland Security (DHS) Directives (www.dhs.gov)

DHS/FEMA Privacy and IT Security Training

DHS/FEMA Security Training Requirements

DHS Instruction 121-01-015 Key Control Policy

DHS Rules of Behavior

DHS Security Management Directive 11042.1: Safeguarding Sensitive but Unclassified (For Official Use Only) Information

DoDI 5210.65 Security Standards for Safeguarding Chemical Agents

Executive orders 13526, 12968, 1233, and 12829

Federal Acquisition Regulations

Federal Emergency Management Agency (FEMA) Directives (www.fema.gov)

Federal Information Security Modernization Act (FISMA)

FEMA Manual 123-20-1, Drug Free Workplace Program

Homeland Security Acquisition Regulation (HSAR) 3052.204-71 Contractor Employee Access

Homeland Security Acquisition Regulation (HSAR) 3052.204-72 Safeguarding of Controlled Unclassified Information

Homeland Security Presidential Directives (HSPD) (www.dhs.gov)

Interagency Security Committee (ISC)Best Practices for Armed Contract Security Officers in Federal Facilities

Interagency Security Committee (ISC) Security Standards for Federal Facilities

Intelligence Reform and Terrorism Prevention Act (IRTPA)

National Archives and Records Administration (NARA) Regulations

National Incident Management System (NIMS) NIMS Guidance and Standards

Occupational Safety and Health Administration (OSHA) Standards

Presidential Policy Directive/PPD-8: National Preparedness

Privacy Act of 1974 (Public Law 93-579)

Privacy at DHS: Protecting Personal Information

Section 504 of the Rehabilitation Act

Title 18 and 50, United States code (USC)

1.9 Definitions

Where “as directed,” “as required,” “as permitted,” “approval,” “acceptance,” or words of similar import are used, it shall be understood that direction, requirement, permission, approval, or acceptance by the Contracting Officer/Contracting Officer’s Representative is intended unless stated otherwise.

Acceptable Quality Level (AQL): The maximum number of defective service outputs considered acceptable in a particular sample size.

Example: if AQL = 10%, Sample Size = 100, then up to 10 defective service outputs may be tolerated (contractor will be directed to correct all defective service outputs when practicable): If the AQL is not reached for a particular sampling of services, the contractor shall review the various parameters in its process to determine the areas causing the defects and make necessary corrections to prevent further defective service. By exceeding the AQL, the contractor risks a deduction of payment for the service area proportional to the percentage of defective samples detected in the sample size.

Code of Federal Regulations (CFR): The codification of the general and permanent rules and regulations published in the Federal Register by the executive departments and agencies of the Federal Government of the United States. The CFR is published by the Office of the Federal Register, an agency of the National Archives and Records Administration (NARA). The CFR is divided into 50 titles that represent broad areas subject to Federal regulation.

Contract Discrepancy: A failure of the contractor to perform in accordance with contract requirements and specifications. A contract discrepancy may result from a failure of the contractor to provide, or provide on time, the required contract products or services, or it may result because delivered products or services did not meet specified contract standards.

Contract Discrepancy Notice (CDN): A formal, written documentation of contractor nonconformance or lack of performance for contracted work.

Contract Discrepancy Response (CDR): A response that the contractor is required to make when notified by a Contract Discrepancy Notice that performance is unsatisfactory.

Contract Non-Compliance: A failure of the contractor to perform in accordance with contract requirements and specifications. A contract discrepancy may result from a failure of the Contractor to provide, or provide on time, the required contract products or services, or it may result because delivered products or services did not meet specified contract standards.

Contracting Officer (CO): The Contracting Officer is a person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.

Contracting Officer’s Representative (COR): A person appointed by the Contracting Officer to monitor performance, evaluate work, provide technical direction and inspect and accept completed work for the Government.

Contractor: The term contractor as used herein refers to both the prime contractor and any subcontractors. The prime contractor shall ensure that his/her subcontractors comply with the provisions of this contract. Nonconformance by the subcontractor is reflected upon the prime contractor and will be treated as a deficiency of the prime contractor.

Contractor Acquired Property: Property acquired or otherwise provided by the contractor for performing a contract and to which the Government has title.

Contractor Representative: A program manager, deputy program manager, or key personnel who have been given the authority, by the contractor, to act on his or her behalf.

Contractor Furnished Items: Except for items specifically stated to be Government furnished, the Contractor shall provide all materials, parts and equipment for the operation, maintenance and repair, replacement of the facilities, systems and equipment.

Corrective Action Plan (CAP): Plan of action for correction of performance.

Corrective Action Request (CAR): A written request issued by the COR or Quality Assurance Evaluators to the contractor when performance is deemed unsatisfactory. The CAR requires the contractor to explain, in writing, within five (5) days, why performance is unsatisfactory, how performance will be returned to satisfactory levels, and how reoccurrence of the problem will be prevented in the future.

Federal Acquisition Regulations (FAR): Title 48 of the Code of Federal Regulations (CFR) governing acquisition procedures of supplies and services for most Federal agencies. The FAR has force and effect of law.

FEMA Incident Workforce Academy (FIWA)– students or staff who are FEMA employees assigned to the CDP for onboarding, training or to prepare for deployment in support of a natural disaster.

Fiscal Year: A period of 12 months beginning October 1 and ending September 30 of the following year. The fiscal year is designated by the calendar year in which it ends.

Frequency of Service.

• Annual (A). Services performed once during each 12-month period of the contract at intervals of 345 to 385 days.

• Semi-Annual (SA). Services performed twice during each 12-month period of the contract at intervals of 160 to 200 calendar days.

• Quarterly (Q). Services performed 4 times during each 12-month period of the contract at intervals of 80 to 100 calendar days.

• Monthly (M). Services performed 12 times during each 12-month period of the contract at intervals of 28 to 31 calendar days.

• Weekly (W). Services performed 52 times during each 12-month period of the contract at intervals of 6 to 9 calendar days.

Government: The term Government as used herein includes the Contracting Officer, COR and the CDP.

Government Furnished Equipment / Property (GFE) (GFP): Vehicles, equipment, tools and supplies in possession of, or acquired directly by the Government and subsequently delivered or otherwise made available to the contractor. GFE is shown in a list in the contract document.

Government Property Administrator: An authorized representative of the Contracting Officer assigned to administer the contract requirements and obligations relating to Government personal property in the custody of a contractor.

Government Quality Assurance: The process used by the Government to confirm, through some objective evaluation method, that the quantity and quality of products and services received from the contractor conforms to the requirements of the contract.

Performance Requirements Summary (PRS): Performance requirements are defined in this contract to mean results or goals to be achieved. The requirements have been purposefully defined to give the contractor sufficient latitude in how it will achieve these results.

Preventive Maintenance (PM): Preventive maintenance is the planned, scheduled, periodic inspection, adjustment, cleaning, lubrication, parts replacement, and minor repair (no larger than trouble call scope) of equipment and systems.

Qualified Personnel: "Qualified" is defined here to mean having the requisite educational and work experience that can reasonably be expected to enable the person to perform satisfactorily under this contract and those qualifications specifically addressed in the SOW.

Quality Assurance (QA): Quality assurance is a process-oriented method used by the Government to assure the effectiveness of contractor’s quality control and focuses on the prevention of discrepancies. QA by the Government should not be construed as quality control, which is the responsibility of the contractor.

Quality Assurance Evaluator (QAE): An individual, who is appointed by the Contracting Officer, responsible for conducting contracting evaluations to ensure contract standards are achieved.

Quality Assurance Surveillance Plan (QASP): The Government owned document stating the methodology used to measure and evaluate contractor performance. This document is developed from the SOW, and approved Quality Control Plan provided by the Contractor (see definition herein). This is a living document and can change several times throughout a contract period of performance. If the QASP requires a change in services or a clarification within the scope of work, this will be brought to the CO attention, and a unilateral or bilateral modification will be issued to include the change.

Quality Control: The system established by the contractor and approved by the Government which enables the contractor to provide control of contractor personnel and ensure the contractor that the terms and conditions of the contract are being met. The Government uses the approved contractor Quality Control Plan to develop a Quality Assurance Surveillance Plan (QASP).

Quality Control Plan (QCP): The written plan developed and provided by the contractor with the proposal or bid or within 30 days of contract award which provides the method in which the contractor will control the performance and quality of the contract requirements. This plan will include all necessary measures/checks taken by the contractor to ensure that the quality of a product or service will meet the contract requirements regarding timeliness, accuracy, appearance, and conformity to appropriate standards and specifications. The QCP will be utilized by the Government to develop a QASP which is defined herein.

Response Time: Response time is defined as the time allowed the contractor after initial notification of a work requirement to be physically on the premises at the work site, with appropriate tools, equipment, and materials, ready to perform the work required.

Risk Assessment: Risk assessments are the overall process of risk identification, risk analysis and risk evaluation. Risk assessment should be conducted systematically, iteratively and collaboratively, drawing on the knowledge and views of stakeholders. It should use the best available information, supplemented by further inquiry as necessary.

SLTT Students are defined as individuals representing a Federal, State, local, tribal or territorial agency at the CDP for an approved training course.

Staff is defined as individuals representing a Federal or contract agency at the CDP performing authorized official duties.

Visitor is defined as an individual visiting the CDP on an approved visitor request.

Unscheduled Observations: Inspections conducted by the COR on a random basis (not to be considered “random sampling”) which may include unannounced visits to the contractor’s facilities or any area/operation under the requirements of this contract.

1.10 Agency Acronyms

AQL: Acceptable Quality Level CAP: Corrective Action Plan CAR: Corrective Action Request CDP: Center for Domestic Preparedness CFR: Code of Federal Regulations CO: Contracting Officer

COB: Close of Business COBRATF: Chemical, Ordnance, Biological, Radiological Training Facility COOP: Continuity of Operations COR: Contracting Officer’s Representative COTS: Commercial Off-The-Shelf CY: Calendar Year DHS: Department of Homeland Security DOJ: Department of Justice EOP: Emergency Operation Plan FBI: Federal Bureau of Investigation FEMA: Federal Emergency Management Agency FOUO: For Official Use Only FY: Fiscal Year GFE: Government Furnished Equipment GFP: Government Furnished Property GPA: Government Property Administrator GSA: General Services Administration HSAR: Homeland Security Acquisition Regulations HSPD: Homeland Security Presidential Directives IAW: In Accordance With IMP: Incident Management Program IOP: Internal Operating Procedure NARA: National Archives and Records Administration NIMS: National Incident Management System NLT: No Later Than NMT: No More Than NPD: National Preparedness Directorate NRF: National Response Framework OEP: Occupant Emergency Plan OSHA: Occupational Safety and Health Administration PDI: Potentially Disqualifying Information PII: Personally Identifiable Information PM: Project Manager PSP: Physical Security Plan SOW: Statement of work QA: Quality Assurance

QAP: Quality Assurance Plan/Program QAE: Quality Assurance Evaluator QASP: Quality Assurance Surveillance Plan QC: Quality Control QCP: Quality Control Plan/Program SOP: Standard Operation Procedure SPII: Sensitive Personally Identifiable Information USC: United Stated Code WMD: Weapons of Mass Destruction

2. Tasks

The core level of work will be to provide security guard services, alarm monitoring services, and supervision and management related to the performance of those services to the CDP enclaves as outlined in this Statement of Work. The contractor shall provide properly qualified, trained, licensed, armed and certified personnel, their uniforms, equipment, tools, materials, supervision and other items and services except such equipment and supplies as provided by the government necessary to: (1) plan for, and (2) provide continuous (twenty-four [24] hours per day, seven [7] days per week) static post and roving patrol armed security services to protect the CDP personnel and properties. The contractor must also plan for and participate in site security surveys and inspections, provide operation and monitoring of the CDP security VSS, IDS, access control, and fire alarm systems, and participate in planning for and execution of CDP and COBRATF Emergency Response Exercise actions.

General armed security officer functions and tasks are outlined in Appendix A: “Armed Security Officer Functions and Tasks,” which aligns to the Interagency Security Committee’s (ISC) “Armed Contract Security Officers in Federal Facilities: An Interagency Best Practice, dated 2019, as amended.

2.1 Security Checks

The contractor shall conduct visual inspections and security checks throughout the CDP enclaves using both motorized and foot patrols.

Patrols will cover all designated roads and areas, and are intended to identify and report security violations, hazards, criminal activity, and suspicious persons or circumstances. Patrols must occur at least twice per shift and include physical checks of exterior and interior doors and windows to ensure they are secure. A contractor-provided electronic guard tour system will be used to document each check. If any doors or windows are found unsecured, guards will secure them and report the incident to the Central Alarm Monitoring Station (CAMS).

These duties are performed by shift security officers and do not require additional staffing.

2.2 Access and Egress Control.

The contractor will monitor and control the entry and exit of persons, vehicles, and property into CDP buildings and grounds, following established security procedures.

2.3 Perform as a Primary Security Response.

The contractor will respond to security events and emergencies to protect the facility, staff, and visitors. This includes assisting with emergency evacuations per the Occupant Emergency Plan (OEP) and completing FEMA Incident Reports as required.

2.4 Traffic Control

The contractor will regulate vehicular and pedestrian traffic on federally controlled property, including gates, roadways, parking lots, and loading docks. Duties include directing traffic and controlling parking.

2.5 Enforce Facility Rules and Regulations

The contractor will enforce facility rules and regulations established by FEMA, DHS, and other applicable federal laws and regulations across the CDP campus.

2.6 Monitor Security Systems and Fire Alarms

The contractor is responsible for monitoring all electronic security systems at the CDP campus, including PACS, IDS, VSS, fire alarm, and mass notification systems, all which alert at CAMS. The contractor will also handle radio communications with security officers, respond to fire alarms, process requests for security, police, fire, and emergency medical services, provide pre-arrival instructions during emergencies, and offer general information to callers. All relevant data and events will be recorded in the daily security journal.

2.7 Lock and Key Control

The contractor will manage the CDP campus-wide lock and key control program, including securing, issuing, inventorying, and monitoring keys, locks, proximity cards, PIV cards, remote transmitters, and security codes, in accordance with CDP policies. The contractor will develop and submit a lock and key control plan for approval within 30 days of contract award, ensuring all items are properly accounted for and not lost or misused. The chemical agent surety lock and key control program is managed separately by FEMA security staff.

2.8 Management and Supervision Requirements

The contractor shall manage the total work effort associated with Armed Security Guard Services required herein to ensure fully adequate and timely completion of these services. Included in this function will be a full range of management duties including, but not limited to, planning, scheduling, and quality control, training and licensing as required by the Alabama Security Regulatory Board and State of Alabama firearms permitting. The contractor shall provide an adequate well-trained staff of personnel with the necessary management expertise to ensure the performance of work in accordance with sound and efficient management practices. The contractor shall maintain an adequate workforce to complete work in accordance with the time and quality standards specified herein.

2.8.1 Daily Supervision of Employees

The contractor shall assign shift supervisors for each shift. These shift supervisors will have the responsibility and authority to direct, oversee, and manage all on duty armed security personnel on-site and assigned to work during their supervisor’s respective shift.

2.8.2 Shift Supervisor Authority

2.8.2.2 The Contractor shall provide a designated Shift Supervisor, who, in the absence of the Project Manager or Deputy Project Manager, shall have full authority to direct, supervise, and control all on duty armed security personnel.

2.8.2.3 The Shift Supervisor shall be responsible for ensuring compliance with all contract requirements, post orders, applicable laws, and regulations.

2.8.2.4 The Shift Supervisor, in the absence of the Project Manager or Deputy Project Manager, shall have the authority to assign, reassign, discipline, and relieve security personnel from duty as necessary to maintain the safety and security of the premises and ensure contract performance.

2.8.2.5 The Shift Supervisor, in the absence of the Project Manager or Deputy Project Manager, shall serve as the primary point of contact between the Contractor and the Contracting Officer’s Representative (COR) for all operational matters related to armed security services.

2.8.2.6 The Shift Supervisor shall have the authority to make immediate decisions regarding security operations, including responding to emergencies, coordinating with law enforcement, and implementing contingency procedures as required.

2.8.2.7 The Contractor shall ensure that a Shift Supervisor is present during all shifts, or that a qualified alternate supervisor is designated in their absence.

3. Personnel

3.1 Qualified Personnel

The contractor shall provide qualified personnel to perform all requirements specified in this SOW. All contractor employees supporting this contract shall be citizens of the United States. Prior to assignment to the contract, the contractor shall submit a current résumé for all management and other key personnel if different from those personnel identified in the proposal. Any replacement of key personnel shall be subject to the Contracting Officer's approval in accordance with the Homeland Security Acquisition Regulation (HSAR) 3052.215-70, Key Personnel or Facilities section.

3.1.1 Suitability to Enter-On-Duty. A suitability to enter on duty determination will be made on each contractor employee applicant. All positions on this contract will require a Moderate Risk Public Trust Suitability determination. Contractor personnel occupying positions or performing functions with a Moderate Risk designation shall undergo a Tier 2 Suitability Background Investigation (T2) and must receive a favorable adjudication thereof from FEMA PSD prior to performing work under this contract. Background investigations will be conducted by FEMA/DHS and the Office of Personnel Management for each employee assigned to work under this contract Additional details related to the background investigation can be found at Section 4.6.4.

3.1.2 Communication. All contractor employees shall have satisfactory communication skills.

3.1.3 Proficiency. All employees assigned by the contractor to perform work under this contract shall be experienced in the assigned work or be given on-the-job training by the contractor. All contractor employees shall be physically able to perform their assigned work.

3.1.4 Alcohol, Drugs, or Other. The contractor shall not employ and shall not allow any employee to perform work under this contract who is under the influence of alcohol, drugs, or any other incapacitating agent.

3.1.4.2 Drug Screening. Contractor personnel shall be drug screened prior to employment. Drug screening shall be conducted after any reported accident (traffic, property damage or personal injury) or at any time the contractor independently identifies circumstances where probable cause exists.

3.1.4.3 Drug Awareness Training. At a minimum, Drug Awareness Training shall be conducted semi-annually. This also includes any subcontractors. Documentation of drug awareness training is required. The topics that should be covered are the dangers of drug abuse; the contractor’s policy of maintaining a drug free workplace; available drug counseling, rehabilitation, and employee assistance programs; and the penalties that may be imposed upon employees for drug abuse violations occurring in the workplace.

3.1.5 Conflict of Interest. The contractor shall not employ any person who is an employee of the United States Government without the consent of the COR. The Contracting Officer will determine if the employment of that person would create a conflict of interest.

3.1.6 Discipline and Standards. The contractor shall maintain satisfactory standards of employee competency, conduct, appearance and integrity and shall be responsible for taking such disciplinary action with respect to their employees as may be necessary

3.1.7 Removal. The contractor shall remove from the site any individual whose continued employment is deemed by the Contracting Officer, upon recommendation from the COR, or contractor to be contrary to the public interest or inconsistent with the best interest of the government.

3.1.8 Continuity of Operations. The contractor shall ensure efficient continuation of all operations by providing adequate numbers of trained relief personnel to substitute for absent employee(s).

3.1.9 Continued Eligibility. If a prospective employee or current employee is found to be ineligible for access to government facilities or information, the COR will advise the contractor that the employee shall not continue to work or to be assigned to work under the contract.

3.1.10 Employment Eligibility. The contractor must agree that each employee working on this contract will have a Social Security Number issued and approved by the Social Security Administration.

3.1.11 Interface with Other Facility Personnel. Attention is invited to the fact that government personnel or other contractors may be engaged in similar and supporting work, requiring close cooperation. However, only the contractor’s Project Management team can direct its contractor employees’ work. Conflicts in directions or instructions from others must be directed to the Contracting Officer and/or COR for resolution.

3.1.12 Subcontracting. The Contracting Officer must consent to and approve changes to any subcontracts and subcontractors.

3.1.13 Employee Training. The contractor shall ensure that contractor personnel have the skills to adapt to changing technology and to efficiently carry out this statement of work. The contractor shall perform annual reviews of each employee position to identify required skills and compare them with the skills of assigned personnel. Staff shortages and training deficiencies shall be identified by the contractor and actions are taken to correct them. These reviews shall address all phases of services, including administrative skills, personal interaction skills, and use of computers. The government is not responsible for training contractor personnel. The contractor shall maintain a record of all training completed by contracted personnel and shall facilitate access to these records for inspection purposes by the CO, COR, or designated Government employee and/or inspections by outside regulatory agencies.

3.1.14 Contractor Licensing, Certification. Any person providing armed security services under this contract must hold an applicable unencumbered license, registration, or certification perpetually during the contract term, from the State of Alabama Security Regulatory Board. For the entire term of the contract, the Contractor shall maintain primary source documentation of each license, registration, or certification of each person providing armed security services under this contract and shall ensure that all licenses, registrations, and certifications remain active and unencumbered while the person is providing armed security services under the contract.

3.1.14.2 Licenses required to conduct business and perform work shall be obtained prior to beginning work at the contractor’s expense. All license and certification renewal costs (to include required training) shall be borne by the contractor.

Personnel licensing and certification shall be in strict compliance with federal, state and local regulations, before performing any work under this contract. The contractor shall provide personnel who possess the necessary qualifications, training, and technical knowledge for their position.

3.2 Key Personnel

The following Contractor personnel are designated as Key for this requirement.

3.2.1 Project Manager. The contractor shall provide an onsite Project Manager who shall be responsible for all contractor work performed under the resulting contract. The Project Manager is further designated as Key Personnel by the Government as set forth in the contract clause HSAR 3052.215-70, Key Personnel or Facilities.

3.2.1.2 The Project Manager shall be a single point of contact for the Contracting Officer (CO) and the Contracting Officer’s Representative (COR). It is anticipated that the Project Manager shall be one of the senior level employees provided by the contractor for this work effort. The name of the Project Manager, and the name(s) of any alternate(s) who shall act for the contractor in the absence of the Project Manager, shall be provided as part of the contractor's proposal. During any absence of the Project Manager, only one alternate shall have full authority to act for the contractor on all matters relating to work performed under the resulting contract. The Project Manager shall have the authority to speak for and act for the contractor in all matters related to required services under this contract. The contractor shall include in the designation letter any limitations on the Project Manager's ability to bind the contractor to changes or adjustments. During normal duty hours, the Project Manager or Deputy shall be on site and available within thirty (30) minutes notice to meet at the facility with government personnel. After normal duty hours, the Project Manager or Deputy must be available within two (2) hours after notification to respond to emergencies within the CDP enclaves.

3.2.1.3 The Project Manager shall have a four year college degree or previous experience in providing law enforcement, criminal justice, or security program management of a project comparable to the size and scope of this contract.

3.2.1.4 Must meet Interagency Security Committee (ISC) medical and training standards.

3.2.2 Deputy Project Manager The contractor shall provide a Deputy Project Manager to fulfill the Project Manager’s duties in the absence of the Project Manager. The Deputy Project Manager is further designated as Key Personnel by the Government as set forth in the contract clause HSAR 3052.215-70, Key Personnel or Facilities.

3.2.2.2 The Deputy Project Manager shall meet all requirements outlined above for the Project Manager in section 3.2.1.

3.2.3 Training Manager:

3.2.3.2 The Training Manager shall have a two-year degree, or comparable education and specialized experience in law enforcement/criminal justice/security program management.

3.2.3.3 Have a minimum of three (3) years of experience in teaching security and law enforcement subjects at the adult education level.

3.2.3.4 Must meet Interagency Security Committee (ISC) medical and training standards.

3.2.3.5 Must be licensed as a Certified Trainer Level 2 by the State of Alabama Security Regulatory Board.

3.2.4 Key Control/Administrative Officer

3.2.4.2 Shall have a minimum of a high school diploma or equivalent; two (2) years technical or university education is preferred.

Two years of experience in administrative office work, asset management or key control type accountability required.

3.2.5 Before replacing any individual designated as Key by the Government, the Contractor shall notify the Contracting Officer no less than 15 business days in advance, submit written justification for replacement, and provide the name and qualifications of any proposed substitute(s). All proposed substitutes shall possess qualifications equal to or superior to those of the Key person being replaced, unless otherwise approved by the Contracting Officer. The Contractor shall not replace Key Contractor personnel without approval from the Contracting Officer. Note: The Government may designate additional Contractor personnel as Key at the time of award.

3.2.6 No Key personnel shall be assigned to any other Key personnel position (No one is to be dual-hatted for Key positions).

3.3 Employee Qualifications

3.3.1 Armed Security Officer (ASO).

3.3.1.2 High school diploma or equivalent.

3.3.1.3 2 years prior military, law enforcement or armed security experience preferred.

3.3.1.4 This position is covered by the Lautenberg Amendment to the Gun Control Act of 1968. Individuals convicted of a misdemeanor or felony crime of domestic violence are not eligible for the position.

3.3.1.5 Required to carry firearms or other weapons authorized for use must qualify with assigned weapons semi-annually to demonstrate proficiency and safe handling. Before beginning work under the contract, personnel must show skill and safe handling with both a semi-automatic service pistol and a 12-gauge shotgun.

3.3.1.6 As a precondition and continuing condition of employment, the incumbent is required to submit to urinalysis testing under the Drug Testing Program in Accordance with (IAW) FEMA Manual 123-20-1, Drug Free Workplace Program.

3.3.1.7 Must pass a pre-employment physical examination, meet and maintain Medical and Physical Fitness Standards.

3.3.1.8 Must be able to obtain and maintain a valid state issued driver's license.

3.3.1.9 May be required to work overtime.

3.3.1.10 May be required to work nights, weekends, and holidays in accordance with assigned schedule.

3.3.1.11 Will be exposed to pepper spray during new hire training.

3.3.1.12 Must successfully obtain and maintain Basic Life Support (CPR) Certification.

3.3.1.13 Assumes essential personnel status during inclement weather / emergencies.

3.3.1.14 Ability to meet and deal with the general public.

3.3.1.15 Ability to read, understand and apply printed rules, detailed orders, instructions and training materials.

3.3.1.16 Must be able to maintain poise and self-control in stressful situations.

3.3.1.17 Ability to construct and write clear, concise, and accurate detailed reports.

3.3.1.18 Proficiency and knowledge in reviewing technical schematics/blueprints/floor plans, electronic equipment operator/technician manuals and instructions, and implementing troubleshooting activities for various electronic security equipment and software;

3.3.1.19 An ability to comprehend rules, detailed orders, instructions, and training materials.

3.3.1.20 Ability and willingness to work in a continuously recorded CCTV audio/video monitored work environment.

3.3.2 Alarm Monitoring Dispatch Officer (AMDO).

3.3.2.2 High school diploma or equivalent.

3.3.2.3 One year of experience related to dispatching, call center operations or customer service responsibilities preferred.

3.3.2.4 Ability to perform and function as a dispatcher in a 911 call center type environment.

3.3.2.5 Ability to maintain poise and self-control under stress.

3.3.2.6 As a precondition and continuing condition of employment, the incumbent is required to submit to urinalysis testing under the Drug Testing Program in Accordance with (IAW) FEMA Manual 123-20-1, Drug Free Workplace Program.

3.3.2.7 Proficiency in using standard word processing and spreadsheet programs and various proprietary security and fire alarm systems software.

3.3.2.8 Proficiency in reviewing technical schematics/blueprints/floor plans, electronic equipment operator/technician manuals and instructions, and implementing troubleshooting activities for various electronic security equipment and software.

3.3.2.9 Ability to comprehend rules, detailed orders, instructions, and training materials.

3.3.2.10 Ability to effectively communicate orally with the public and all management levels up to and including executive staff.

3.3.2.11 Assumes essential personnel status during inclement weather / emergencies.

3.3.2.12 May be required to work nights, weekends, and holidays in accordance with assigned schedule.

3.3.2.13 Ability and willingness to work in a continuously recorded CCTV audio/video monitored work environment.

3.3.3 Shift Supervisor

In addition to meeting all Armed Security Officer (ASO) qualifications, the shift supervisor must:

3.3.3.2 Be a person of integrity, maturity, and good judgment. Each supervisor must have experience in law enforcement, military service, or security, preferably with successful field supervisory experience.

3.3.3.3 Resumes for each supervisor must be submitted to the COR who will review and forward the request to the Contracting Officer who will approve or reject the recommendation.

3.3.3.4 Supervisors must complete supervisory training, in addition to basic officer training, before starting duty as a supervisor. The contractor is responsible for providing this training, which must cover key management areas.

3.3.3.5 Supervisory Training will include the following topics:

• Supervisory duties and responsibilities.

• Effective leadership.

• Disciplinary methods and procedures.

• Effective written and verbal communications and orders.

• Motivating employees and problem-solving methods.

• Scheduling employee work periods.

• Uniform clothing and grooming standards.

• Post inspection procedures.

• The contractor must maintain documentation of this training and must forward copies of training documents to the COR.

3.4 Firearms Qualification Standards

3.4.1 Each employee must receive the amount of firearms training necessary to qualify in firearms proficiency in accordance with the Alabama Peace Officer Standards and Training Commission (APOSTC) firearms standards (See Appendix B for course of fire specifics.).

3.4.2 Sidearm. A score of 70% or higher on the APOSTC prescribed course of fire is required to pass. The FBI Q target will be utilized for sidearm qualifications.

3.4.3 Shotgun. A score of 70% or higher on the APOSTC prescribed course of fire is required to pass. The NRA B-27 target will be utilized for shotgun qualifications.

3.4.4 Firearms qualification shall be valid for six (6) months from the date of qualification.

3.4.5 All contract guard employees must pass a written test and a firearms qualification test prior to assignment as a guard under this contract. Guard employees will be provided with three (3) opportunities to successfully qualify with their assigned weapon. Employees who do not achieve a passing score in three (3) opportunities at either the initial qualification or during a required requalification will be released from the contract.

3.4.6 Firearms instructors must be licensed as a Certified Trainer Level 2 by the State of Alabama Security Regulatory Board.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .