ANNUAL_154_DIVE_INSP.doc
DOC document 71 KB Posted
- Attached to
- USCGC OLIVER BERRY UNERWATER HULL CLEANING
- Solicitation number
- 52000QR240003664
About this file
This solicitation requests proposals for underwater hull cleaning services for a Coast Guard cutter. The solicitation seeks a contractor to clean the underwater body and renew zinc anodes of USCGC Oliver Berry while moored in Honolulu, Hawaii from April 1-27, 2024. The contractor must submit video highlights before and after cleaning, clean hull surfaces of marine growth and debris according to standards, and ensure transducer surfaces are cleaned by hand without power tools. The solicitation is a firm fixed-price contract awarded to the responsible offeror providing the best value based on specification, price, past performance, and quality. Proposals are due by April 1, 2024 and shall include cost breakdown, unit costs, payment terms, and UEI/Cage Code. The solicitation is issued by the Department of Homeland Security Coast Guard.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
11001_JLW_0220_154WPC
WORK ITEM 1: U/W Body (waterborne), Clean and Inspect
1. Scope
1.1 Intent. This work item describes the requirements for the Contractor to clean the vessel’s U/W body and to renew zinc anodes (if required), while the vessel is moored pier side.
1.2 Government-furnished property. (IF REQUIRED)
| MTI |
| ITEM DESCRIPTION |
| NSN/PN |
| QTY |
| ESTIMATED COST |
($/UNIT)
| N |
| Anode, stern tube |
| P/N: Z0020202H3 |
NIIN: 016445483
| 16 ea |
| 50 |
| N |
| Nut, Self-Locking |
| P/N: 90715A145 |
NIIN: 015085774
| 36 ea |
| 5 |
| N |
| Anode, Sea Chest Grate |
| P/N: GA-4 |
NIIN: 016476179
| 4 ea |
| 30 |
| N |
| Screw, Prop zinc plate |
| P/N: 950756 |
NIIN: 016340210
| 8 ea |
| 5 |
| N |
| Screw, Sea Chest Grate Anode, |
| P/N: 93190A634, |
NIIN: 016197182
| 4 ea |
| 5 |
| N |
| Screw, stern tube covers |
| P/N: 90585A626 |
NIIN: 016161107
| 42 ea |
| 5 |
| N |
| Zinc plate, propeller |
| P/N: 950733 |
NIIN: 016278941
| 2 ea |
| 50 |
2. REFERENCES
MPC B10015.D
MPC B10018.D
Other References
None
3. REQUIREMENTS
3.1 General.
3.1.1 CIR.
None.
3.1.2 Tech Rep.
Not Applicable.
3.1.3 Protective measures. The Contractor shall furnish and install all protective coverings to seal off and protect all non-affected vessel's components, equipment, and spaces near the work area against contamination during the performance of work. Upon completion of work, the Contractor shall remove all installed protective measures, inspect for the presence of contamination, and return all contaminated equipment, components, and spaces to original condition of cleanliness.
3.2 Requirements. The Contractor shall submit video highlights of underwater body surfaces (e.g. bow thruster, propellers, rudders, transducers, heavily fouled hull areas, etc.) before and after cleaning. The Contractor shall clean the U/W body surfaces free of all marine growth, debris, and all other surface contaminants in accordance with MPC B10015.D. If required, Renew Government-furnished components listed below paragraph 1.2. in accordance with MPC B10018.D. Ensure all transducer surfaces are cleaned with only hand held brushes, without the use of power attachments. Ensure that existing u/w body coating system or non-coated surfaces do not incur any damage during cleaning process.
4. NOTES
Period of Performance (POP) is from 01APR24-27APR24
Work to be completed at Cutter homeport USCG BASE HONOLULU, 400 Sand Island Parkway, Honolulu, HI, 96819
Point of Contact is CPO Gary Menge, EPO USCGC OLIVER BERRY, (808) 842-2860, gary.m.menge@uscg.mil
File details come from the government source that posted it. Updated .