Amendment 1 - Questions and Answers.pdf

DEPARTMENT OF THE AIR FORCE

2D CONTRACTING SQUADRON (AFGSC)

BARKSDALE AIR FORCE BASE LOUISIANA

FA460826QC060, ISU, Amendment Page 1 of 3

09 June 2026

MEMORANDUM FOR Vendors/Offerors

FROM: 2d Contracting Squadron/PKP 801 Kenney Avenue, Building 4400, Suite 2300 Barksdale Air Force Base, Louisiana 71110

SUBJECT: Amendment 1, FA460826QC060, ISU

1. The purpose of issuing Amendment 1 is to extend the deadline for quotes from 12 June 2026, until 2:00 PM, 17 June 2026, and provide supplemental information in the form of a Question and Answers document. The following questions were submitted to 2 CONS and the answers to each are highlighted below in red:

Question 1: Can you please clarify what “compartments on the front and back, totaling 4 total sections” means?

Answer 1: By front and back, we need to be able to put toolboxes in the front and back with doors on both sides.

Question 2: What type of adjustable shelving is required?

Answer 2: Just flat adjustable shelves that we can place toolboxes on. They need to be able to hold several toolboxes.

Question 3: Is a 20 ft or 40 ft container needed?

Answer 3: Not that size. Height max – 8FT Question 4: Confirming no vents for airflow? Answer 4:

Must be airtight, no vents

Question 5: Would you want us to add locks to the container, or would the end user prefer to add their own?

Answer 5: We can use our own locks if needed. We can use padlocks

Question 6: would you prefer single doors to each side?

Answer 6: It needs to be a secure divider. These need to be packed tight and during flight must not be able to roll around

FA460826QC060, ISU, Amendment Page 2 of 3

Question 7: What kind of compartments?

Answer 7: The compartments need to be large enough to hold several large toolboxes. There can also be one large section in the front and one in the back.

Question 8: What dimensions would they like for the shelving and what dimensions for the trays?

Answer 8: The shelves must be able to extend from one side of the compartment to the other

Question 9: How many adjustable shelves are required in each container?

Answer 9: 8 Each

Question 10: How many trays are required in each container?

Answer 10: 8 Each

Question 11: Should pricing include a specific configuration for all six containers, or should vendors propose a recommended configuration that meets the Government's needs?

Answer 11: Must meet configuration that matches salient characteristics.

Question 12: Can you confirm the attached data sheet is the required container?

Answer 12: As long as containers match salient characteristics

Question 13: How many shelves are required?

Answer 13: 8 each

Question 14: How many and what size trays are required?

Answer 14: 8 each

FA460826QC060, ISU, Amendment Page 3 of 3

2. Any further questions are due by 11 June 2026, 2:00 PM CDT. Answers to these questions will be provided no later than 15 June 2026.

3. The due date and time for quotes is 2:00 PM CDT on 17 June 2026 for Solicitation FA460826QC060.

4. If you have any questions or concerns regarding this amendment, please contact Amn MoisesDiaz, Contract Specialist, by telephone at (318) 456-5205 or by email atmoises.diaz.1@us.af.mil.

RONNIE L. BUSHUE, GS-13, DAF

Contracting Officer mailto:atmoises.diaz.1@us.af.mil