Amendment 0004-PID PACK.pdf

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:002777341

PLUG, MACHINE THREAD

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

DRAWING: CPMX10

P/N: 453006

SQUARE COUNTERSUNK - ORDNANCE PART

STEEL: ANY STEEL ACCEPTABLE

FINISH PER SAE AMS-QQ-P-416, TYPE 1, CLASS

3 OR ASTM B633 TYPE I, CLASS FE/ZN5 .0002

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 CPMX10

REVISION NR A DTD 02/06/1961

PART PIECE NUMBER: 453006

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:XX

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:O

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

NSN:005761749

<U>ANODE, CORROSION PREVENTIVE</>

<U>0.500-14 NPT ON ONE END, THREADED AREA IS APPROXIMATELY .750 LONG</>

<U>*</>

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

INSPECTION REQUIREMENT IAW MIL-A-18001: LATEST REVISION

EXPORT CONTROL

IDENTIFFY TO:

REFERENCE NUMBER:A0003

SAMPLING:

REFERENCE NUMBER:ZD080

MERCURY FREE REQUIREMENTS:

REFERENCE NUMBER:ZD025

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 3279914

REVISION NR A DTD 12/24/1974

PART PIECE NUMBER: 3279914

IAW REFERENCE SPEC NR MIL-A-18001K(I3) NOT 1

REVISION NR 3 DTD 12/03/2013

PART PIECE NUMBER: CLASS 2 TYPE ZRN

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

PRESERVATION, PACKAGING, IAW MIL-PRF-23199 LATEST REVISION,

MARKINGS IAW MIL-STD-129.

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

IN ADDITION TO ABOVE REQUIREMENTS, CUSHIONING MATERIAL AND

UNIT/INTERMEDIATE CONTAINER SHALL CONFORM TO APPENDIX J, TABLES J-V AND

JVII, MIL-STD-2073.

NSN:008136055

ANODE,CORROSIVE PREVENTIVE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:A0003

REFERENCE NUMBER:Q0097

CRITICAL APPLICATION ITEM

IAW BASIC SPEC NR MIL-DTL-18001L(1)

REVISION NR L DTD 12/15/2015

PART PIECE NUMBER: CLASS 2 TYPE ZRN .840 6FT

PREP FOR DELIVERY

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:XX

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:C

UNIT CONT:XX OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

PACKAGING, PRESERVATION, MARKING AND LABELING IAW LATEST EDITION OF

MIL-PRF 23199. BARCODE IAW MIL-STD 129.

REFERENCE NUMBER:IP025

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

REFERENCE NUMBER A1202

Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

REFERENCE NUMBER Q0097

THIS ITEM IS USED IN A MERCURY FREE ENVIRONMENT

AND MUST ADHERE TO THE REQUIREMENTS AS SPECIFIED

IN MERCURY FREE DRAWING 13873-03-0001. A COPY OF

THIS DRAWING IS AVAILABLE AT DSCR AND CAN BE

OBTAINED VIA INTERNET AT WEBSITE:

http://www.dscr.dla.mil/userweb/dscrbat/qaps.htm (ALL LOWER

CASE).

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER A0646

REFERENCE NUMBER RD002

THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS

BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE

COVERED DEFENSE INFORMATION (CDI). CDI IS UNCLASSIFIED

CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION<(>,<)>

AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION

(CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO

DFARS 252.204-7012.

REFERENCE NUMBER RC001

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

REFERENCE NUMBER T0050

TYPE I SHELF LIFE

This material has shelf life. Products delivered under this contract shall be manufactured/cured/assembled to ensure that a minimum of 85% shelf-life is remaining at time of receipt by the first government activity. Shelf life markings shall be in accordance with the latest revision of MIL-STD-129. Shelf life for this material is as follows:

file:///orgeast/...ng%20and%20Solicitation/SF-33%20&%20Amendments/Amendment-0004_5-15-20/PID%20TEXT-0004/PID%20PACK.txt[5/15/2020 5:29:44 PM]

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER ZD003

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil