Amended 1 - ITB 858 - Administrative Document.docx

STATE OF IDAHO

DIVISION OF PURCHASING

FOR

DEPARTMENT OF FISH AND GAME

Invitation to Bid (ITB) #858

IDFG ATVs

AMENDED 1 – 5/8/2025

TABLE OF CONTENTS

ITB Administrative Information

ITB Lead:

Kevin Jarrett, Buyer Division of Purchasing 650 W. State St., Room 100 Kevin.Jarrett@adm.idaho.gov 208-332-1615

IPRO LOGIN

PURPOSE

The Idaho Department of Fish and Game (IDFG) through the Idaho Division of Purchasing (DOP), is requesting Bids from qualified Vendors for the purchase of new, 2025 or current model year ATVs in accordance with the specifications provided below.

GENERAL INFORMATION, solicitation instructions and standard terms and conditions This Solicitation is issued by the state of Idaho (the “State”) via IPRO: (IPRO LOGIN). The ITB Lead is the only contact for this Solicitation. All correspondence regarding this ITB shall be in writing. In the event that it becomes necessary to revise any part of this ITB, amendments will be posted at IPRO. It is the responsibility of the Bidder to monitor IPRO for any updates or amendments. Any oral interpretations or clarifications of this ITB shall not be relied upon. All changes to this ITB must be in writing and posted at IPRO to be valid. Alternate Bids are not allowed.

INQUIRIES

Questions or other correspondence must be submitted in writing to the ITB Lead listed below. QUESTIONS MUST BE RECEIVED BY 11:59:59 P.M. Mountain Time ON THE DATE LISTED IN THE ITB ADMINISTRATIVE INFORMATION. Written questions must be submitted using Attachment 1 – Bidder Questions. Official answers to all written questions will be posted on IPRO as an amendment to this ITB.

ITB Lead: Kevin Jarrett, Buyer Phone: 208-332-1615 E-mail: Kevin.Jarrett@adm.idaho.gov

Any questions regarding the State of Idaho Standard Contract Terms and Conditions (found in the event in LUMA) must also be submitted in writing, using Attachment 1 – Bidder Questions, by the deadline identified in the ITB Administrative Information. The State will not consider proposed modifications to these requirements after the date and time set for receiving questions. Questions regarding these requirements must contain the following:

1. The rationale for the specific requirement being unacceptable to the party submitting the question (define the deficiency).

2. Recommended verbiage for the State’s consideration that is consistent in content, context, and form with the State’s requirement that is being questioned.

3. Explanation of how the State’s acceptance of the recommended verbiage is fair and equitable to both the State and to the party submitting the question.

Bids which condition the Bid based upon the State accepting other terms and conditions not found in the ITB, or which take exception to the State’s terms and conditions, will be found non-responsive, and no further consideration of the Bid will be given.

BACKGROUND

The IDFG is replacing older ATVs as part of the IDFG Fleet Management Program.

QUANTITY

Forty (40) ATVs as specified on Attachment 2 – Specifications below.

COST

Provide your Total Cost on Attachment 3 – Bid Schedule. Your Total Cost must be fully burdened to include all costs and fees required to deliver the ATVs to IDFG as specified and ready to be utilized, including but not limited to:

Price of the ATV’s Dealer Doc Fees Application for Title Fees (Dealer to submit application for title) Delivery (FOB Dest.)

All Governmental Rebates, Incentives, Etc.

BILLING PROCEDURE

The invoice and respective reports must be submitted no later thirty (30) calendar days after delivery. No invoice will be accepted or paid without receipt of required documentation. Invoices submitted without the required documentation will be returned to the Contractor for resubmission.

The Contractor must provide the following information with each invoice:

Invoices and reports are to be submitted via email to:

Agency Contact Person: Briana Elison Agency Name: Idaho Department of Fish and Game Address: 600 S Walnut Street, Boise, Idaho 83712 Email Address: accounts_payable@idfg.idaho.gov

Required Bid Submission Items

Your Bid Submission must consist of the following:

Bid Schedule Provide your cost information on Attachment 3 – Bid Schedule, below. Do not submit your Bid on any other form. Submitting your Bid on a form different than the Bid Schedule may cause your Bid to be rejected as non-responsive.

Product Documentation for any “equal” offered items.

State of Idaho Signature Page The State of Idaho Signature Page must be completed and submitted as part of your Bid. The State of Idaho Signature Page is attached in IPRO.

Bid Submission Methods Bids must be submitted electronically via IPRO. Do not fax or e-mail your Bid. Your Bid must be received by the Division of Purchasing by the date and time specified on the IPRO header document. The official time, for bid closing purposes, is the Division of Purchasing’s time clock.

8.2.1 Electronic Submission Via IPRO

When submitting electronically via IPRO, upload all of the Required Bid Submission Items (See Section 8.1) and enter your cost in IPRO for each line item; as the “Total Cost” on the Bid Schedule OR $0.01 as your cost in IPRO.

Upload all Required Bid Submission Items using Microsoft products such as Word and Excel. Do not submit items in .pdf format, unless provided otherwise in this ITB.

When submitting via IPRO, be advised that that the Bidder for Bid evaluation and award purposes is the entity profile under which submit in IPRO, which must be the same legal entity presented in your uploaded response materials. If the entity identified on the state supplied Signature Page differs from the entity under which you submit your Bid in IPRO, the information provided on the Signature Page prevails.

All Bidders participating in a Solicitation issued through IPRO must establish an account in the IPRO system as it is necessary in order to process and/or award the resulting Contract(s). It is free to establish an account and only takes a few minutes.

Bidders are further advised to upload response materials with descriptive file names, organized and consolidated in a manner which allows the State to efficiently navigate the Bidder’s response; as the State will print uploaded documents for evaluation in the manner received via IPRO.

Trade Secrets If your Bid contains trade secret information which you have identified, you must also submit a redacted copy of the Bid (in electronic format, with the word “redacted” in the file name) with all trade secret information removed or blacked out; as well as a separate document containing a complete list (per the instructions in the three (3) paragraphs directly below) of all trade secret information which was removed or blacked out in the redacted copy.

Paragraph 28 of the Solicitation Instructions to Vendors describes trade secrets to “include a formula, pattern, compilation, program, computer program, device, method, technique or process that derives economic value, actual or potential, from not being generally known to, and not being readily ascertainable by proper means by other persons and is subject to the efforts that are reasonable under the circumstances to maintain its secrecy.” In addition to marking each page of the document with a trade secret notation (as applicable; and as provided in Paragraph 28 of the Solicitation Instructions to Vendors), Bidders must also:

Identify with particularity the precise text, illustration, or other information contained within each page marked “trade secret” (it is not sufficient to simply mark the entire page). The specific information you deem “trade secret” within each noted page must be highlighted, italicized, identified by asterisks, contained within a text border, or otherwise clearly delineated from other text/information and specifically identified as a “trade secret.”

Provide a separate document entitled “List of Redacted Trade Secret Information” which provides a succinct list of all trade secret information noted in your Bid; listed in the order it appears in your submittal documents, identified by Page #, Section #/Paragraph #, Title of Section/Paragraph, specific portions of text/illustrations; or in a manner otherwise sufficient to allow the State’s procurement personnel to determine the precise text/material subject to the notation. Additionally, this list must identify with each notation the specific basis for your position that the material be treated as exempt from disclosure.

AWARD

Award will be made to the responsive responsible Bidder with the lowest Total Cost by line item or all to one, as provided on the Bid Schedule and in the best interest to the State.

Warranty, Service and Support, Maintenance, etc.

Manufacturer’s Standard warranty must be included for all ATVs purchased on the resulting contract.

Delivery All ATV’s must be delivered FOB Destination to the following:

IDFG REGION 3 HQ 15950 NORTH GATE BLVD. NAMPA, ID 83687

Attention Michael Tompkins @ 208-287-2767 M-F from 8:00 am – 4:00 pm (MT)

· Twenty-four (24) hour notice before delivery

· One (1) owner’s manual must be supplied with each ATV.

· Two (2) keys for the ATVs

· ATV’s must be prepped and ready for use when delivered.

· Each machine shall have at least two (2) gallons of gas in the gas tank

· Dealer is responsible for offloading machines to ground level at IDFG Warehouse.

· Any delivery materials/trash must be disposed of by dealer.

Contractor must give an estimated delivery on Attachment 3 – Bid Schedule when submitting a bid.

ACCEPTANCE

Upon receipt, the ATVs shall be inspected to ensure the requirements and specifications are met. The Acceptance period shall be for fourteen (14) calendar days from the delivery date of the ATVs. If the ATVs do not meet the requirements, specifications, or have discrepancies that cannot be fixed by the Contractor during the training period, the ATVs shall be rejected by IDFG, via email notification. The Contractor must pick-up, correct any discrepancies, and re-deliver within thirty (30) calendar days after notification from IDFG, at no additional cost to IDFG. The Acceptance period shall start over for any rejection, upon re-delivery of the ATVs. The ATVs shall not be accepted by IDFG until they meet all of the Contract requirements and specifications.

Insurance Requirements See Insurance Requirements under the Questions section in IPRO.

Records Maintenance Contractor shall maintain or supervise the maintenance of all records necessary to properly account for all payments made to the Contractor pursuant to the Contract. These records shall be retained by the Contractor for at least three (3) years after the Contract terminates, or until all audits initiated within the three (3) years have been completed, whichever is later.

Audit Rights The Contractor agrees to allow State and Federal auditors and State purchasing staff access to all the records relating to this Contract, for audit, inspection, and monitoring of services or performance. Such access will be during normal business hours or by appointment.

ATTACHMENT 1 – BIDDER QUESTIONS

ITB 858 – IDFG ATV’s

PLEASE DO NOT IDENTIFY YOUR NAME OR YOUR COMPANY’S NAME OR PRODUCT NAMES OF INTELLECTUAL PROPERTY IN YOUR QUESTIONS.

ADD ROWS BY HITTING THE TAB KEY WHILE WITHIN THE TABLE AND WITHIN THE FINAL ROW.

The following instructions must be followed when submitting questions using the question format on the following page.

1. DO NOT CHANGE THE FORMAT OR FONT. Do not bold your questions or change the color of the font.

2. Enter the ITB section number that the question is for in the “ITB Section” field (column 2). If the question is a general question not related to a specific ITB section, enter “General” in column 2. If the question is in regards to a State Term or Condition or a Special Term or Condition, state the clause number in column 2. If the question is in regard to an attachment, enter the attachment identifier (example “Attachment A”) in the “ITB Section” (column 2), and the attachment page number in the “ITB page” field (column 3).

3. Do not enter text in the “Response” field (column 5). This is for the State’s use only.

4. Once completed, this form is to be e-mailed per the instructions in the ITB. The e-mail subject line is to state the ITB number followed by “Questions.”

ITB # 858 IDFG ATVs Page 12

ITB 858 – ATVs

ATTACHMENT 2 – SPECIFICATIONS

ITB 858 – IDFG ATVs

The brand names and specifications specified in this solicitation are intended to be descriptive, but not restrictive; indicative of the quality and characteristics of items that meet the minimum requirements. Bidders offering an “equal” must include documentation which demonstrates, to the IDFG’s satisfaction, that the offered item(s) meets the requirement of the solicitation. In the event documentation is not satisfactory, IDFG reserves the right to seek clarification from the Bidder. Failure to provide satisfactory documentation or a clarifying response may eliminate the Bidder from further consideration.

All parts not specifically listed or mentioned in the Specifications must be manufactured standard, making a complete, fully functional ATV.

Brighter colors such as yellow, red, and orange are not desirable in wildlife management areas. These colors will not disqualify the vendor from bidding if that is all they have in available inventory. Earth Tones are preferable.

1. ATV Specifications

0. Single Rider ATV to be used in extremely dusty terrain over very long distances with little or no radio/cell coverage. The ATV is used at wildlife management areas to repair fencing, deliver depredation feedings, general farming tasks and to run patrols. Because of the conditions, shaft or chain driven ATVs have proven over the years to be more reliable, have less downtime for repairs and no need of belt replacement out in the field.

Nineteen (19) each ATVs - Honda Foreman 4x4, Polaris Sportsman 570, Can-Am 570, or equal ATV Offered Must:

0. Shaft or chain driven.

0. Engine must be a minimum of 500cc and not exceed 699cc.

0. Electric starter.

0. Transmission must have reverse and on demand two (2) wheel drive and four (4) wheel drive options.

0. Lockable parking brake.

0. Electronic power steering.

0. Model specific front and rear brush guards and underbody shields (protection from deep vegetation and rocky or steep terrain).

0. Include standard instrumentation of speedometer, digital odometer, tachometer, trip meter, hour meter, clock, service indicator, fuel gauge, 4WD indicator, thermometer, low battery indication.

0. High/Low beam headlights and brake/taillights.

0. Fit in a six (6’) foot long bed of a standard pick-up truck with the tailgate down. ATV width must be less than forty-nine and a half inches (49.5”). ATV must not exceed seventy-seven (77”) inches eighty-six (86”) inches in total length.

0. Have a hitch receiver between one and a quarter (1.25”) inches and two (2”) inches capable of pulling up to thirteen hundred (1300 lbs.) pounds.

0. Have front and rear steel racks to handle up to two hundred pounds (200 lbs.) of equipment. Composite racks will be accepted.

0. Heated grips.

0. Front mounted electric winch with two thousand (2,000 lbs.) pound pulling capacity.

0. Durable weather cover that is water-resistant and fade resistant. Must have a shock cord or full elastic hem to ensure snug fit.

0. Single Rider ATV to be used in extremely dusty terrain over very long distances with little or no radio/cell coverage. The ATV is used at wildlife management areas to repair fencing, deliver depredation feedings, general farming tasks and to run patrols. Because of the conditions, shaft driven ATVs have proven over the years to be more reliable, have less down time for repairs and no need for belt replacement out in the field.

Twelve (12) each ATVs – Yamaha Grizzly 700, or equal ATV Offered Must:

1. Shaft driven.

1. Minimum of 700cc 675cc and not exceed 750cc.

1. Electric starter.

1. Transmission must have reverse and on demand two (2) wheel drive and four (4) wheel drive options.

1. Lockable parking brake.

1. Electronic power steering.

1. Model specific front and rear brush guards and underbody shields (protection from deep vegetation and rocky or steep terrain).

1. Standard instrumentation of speedometer, digital odometer, tachometer, trip meter, hour meter, clock, service indicator, fuel gauge, 4WD indicator, thermometer, low battery indication.

1. High/Low beam headlights and brake/taillights.

1. Fit in a six (6’) foot long bed of a standard pick-up truck with the tailgate down. ATV width must be less than forty-nine and a half inches (49.5”). ATV must not exceed seventy-seven (77”) inches eighty-six (86”) inches in total length

1. A hitch receiver between one and a quarter (1.25”) inches and two (2”) inches capable of pulling up to thirteen hundred (1300 lbs.) pounds.

1. Have front and rear steel racks to handle up to two hundred pounds (200 lbs.) of equipment. Composite racks will be accepted.

1. Have heated grips.

1. Include a front mounted electric winch with two thousand (2,000 lbs.) pound pulling capacity.

1. A durable weather cover that is water-resistant and fade resistant. Must have a shock cord or full elastic hem to ensure snug fit.

0. Single Rider ATV to be used in extremely dusty terrain over very long distances with little or no radio/cell coverage. The ATV is used at wildlife management areas to repair fencing, deliver depredation feedings, general farming tasks and to run patrols. Because of the conditions, shaft driven ATVs have proven over the years to be more reliable, have less down time for repairs and no need for belt replacement out in the field. This ATV may also need to be fitted with a track system during the winter months to provide access for depredation feedings and patrols.

Five (5) each ATVs – Polaris 850 Sportsman, Can-Am Outlander 850, or equal All ATVs offered Must:

2. Shaft driven.

2. A minimum of 800cc and not exceed 880cc.

2. Electric starter.

2. Transmission must have reverse and on demand two (2) wheel drive and four (4) wheel drive options.

2. Lockable parking brake.

2. Electronic power steering.

2. Model specific front and rear brush guards and underbody shields (protection from deep vegetation and rocky or steep terrain).

2. Standard instrumentation of speedometer, digital odometer, tachometer, trip meter, hour meter, clock, service indicator, fuel gauge, 4WD indicator, thermometer, low battery indication.

2. High/Low beam headlights and brake/taillights.

2. Fit in a six (6’) foot long bed of a standard pick-up truck with the tailgate down. ATV width must be less than forty-nine and a half inches (49.5”). ATVs must not exceed seventy-seven (77”) inches eighty-six (86”) inches in total length

2. Hitch receiver between one and a quarter (1.25”) inches and two (2”) inches capable of pulling up to thirteen hundred (1300 lbs.) pounds.

2. Front and rear steel racks to handle up to two hundred (200 lbs.) pounds of equipment. Composite racks will be accepted.

2. Heated grips.

2. Front mounted electric winch with two thousand (2,000 lbs.) pound pulling capacity.

2. Durable weather cover that is water-resistant and fade resistant. Must have a shock cord or full elastic hem to ensure snug fit.

2. Accommodate a track system.

0. Single Rider ATV to be used in extremely steep terrain over very long distances with little or no radio/cell coverage. The ATV is used by enforcement officers to run patrols. Because of the conditions, shaft driven ATVs have proven over the years to be more reliable, have less down time for repairs and no need for belt replacement out in the field. This ATV may also need to be fitted with a track system during the winter months to provide patrols at higher speeds.

Four (4) each ATVs - Can-Am Outlander XT 1000, or equal ATVs Offered Must:

3. Shaft driven.

3. Minimum of 950cc and not exceed 1000cc.

3. Electric starter.

3. Transmission must have reverse and on demand two (2) wheel drive and four (4) wheel drive options.

3. Lockable parking brake.

3. Electronic power steering.

3. Model specific front and rear brush guards and underbody shields (protection from deep vegetation and rocky or steep terrain).

3. Standard instrumentation of speedometer, digital odometer, tachometer, trip meter, hour meter, clock, service indicator, fuel gauge, 4WD indicator, thermometer, low battery indication.

3. High/Low beam headlights and brake/taillights.

3. Fit in a six (6’) foot long bed of a standard pick-up truck with the tailgate down. ATV width must be less than forty-nine and a half inches (49.5”). ATVs Must not exceed seventy-seven (77”) inches eighty-six (86”) inches in total length

3. Hitch receiver between one and a quarter (1.25”) inches and two (2”) inches capable of pulling up to thirteen hundred (1300 lbs.) pounds.

3. Front and rear steel racks to handle up to two hundred (200 lbs.) pounds of equipment. Composite racks will be accepted.

3. Heated grips.

3. A front mounted electric winch with two thousand (2,000 lbs.) pound pulling capacity.

3. Durable weather cover that is water-resistant and fade resistant. Must have a shock cord or full elastic hem to ensure snug fit.

3. Accommodate a track system.

Attachment 3 – BID SCHEDULE ITB 858 – IDFG ATVs

This completed Bid Schedule must be submitted with your response. Specifications for each line item in the table below can be found in Attachment 2 – Specifications. You are not required to bid on all line items to be considered for an award.

(Brand, Model Number, etc.)

Delivery within days ARO

Do the products you are offering meet the specifications listed in Attachment 2 – Specifications? ☐ Yes ☐ No

If no, your bid must include documentation of how your offered products deviate and why those deviations should be considered “minor deviations”.

Company Name of Bidder:

Contact Name/Phone:

Contact E-mail:

image1.png