AK95945757.pdf
PDF 371 KB Posted
- Attached to
- Quick Release Manifold
- Solicitation number
- SPRDL125R0184
About this file
This is a DD Form 2169 Special Packaging Instruction dated May 29, 2024, for a Quick Release Manifold Assembly (Part No. PE24016, NSN 2590-99-594-5757). The form specifies detailed packaging requirements for military preservation and shipping of this equipment, which weighs 35.2 pounds per unit and measures 12.4 x 11.4 x 10.3 inches when packaged.
The packaging instructions require multiple levels of protection including operational fluid preservation, sealing with NAS-847 caps/plugs, and cushioning materials conforming to various military and ASTM standards. Level A packing uses wood-cleated panelboard shipping boxes or nailed wood boxes, while Level B packing uses weather-resistant fiberboard boxes. The form includes specific hardware requirements (3/8 x 7 carriage bolts with washers and nuts), blocking/bracing materials, and container specifications. When shipments exceed 125 pounds to the same destination, palletization per MIL-STD-147 is required. The document includes technical drawings showing hole dimensions and cushioning material placement (items A, B, and C) along with photographs demonstrating proper packaging configuration for the manifold assembly.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL125R0184.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved
OMB No. 0704-0188
-AI
CL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
.PE24016 (K0824) QUICK RELEASE MANIFOLD ASSEMBLY 19207 AK95945757
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-99-594-5757 29 MAY 2024
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 35.2 0.843 12.4 X 11.4 X 10.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 42
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1 2-C A/R CAPS/PLUGS: NAS-847
14. DRYING 3-D 1 BLOCKING/BRACING: A-A-55057, TY A,
MIL-STD-2073-1 SIZE: 7 X 7 X 1/2"
15. PACKING
4-E 2 3/8 X 7 HARDWARE SET
5-F 3 CUSHIONING: A-A-59136, CL 1, GR A, 2.0# DENSITY
a. LEVEL A 6-G 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, MIL-STD-2073-1 & NOTE J GR 275, VR SW, SIZE: 11 X 10 X 8-1/2
b. LEVEL B 7-H 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 24 X 24
MIL-STD-2073-1 & NOTE J 8-I 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,
16. MARKING GR W5c, VR SW, SIZE: 12 X 11 X 9-1/2
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL WITH OPERATIONAL FLUID.
C. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
D. SEE PAGES 2 AND 3 FOR HOLE DIMENSIONS AND ORIENTATION.
E. COMMERCIAL GRADE HARDWARE IS ACCEPTABLE, HARDWARE SHALL BE PLATED, PAINTED OR
PRESERVED WITH MIL-PRF-16173, GRADE 4. EACH HARDWARE SET INCLUDES: 1PC 3/8 X 7 CARRIAGE
BOLT, 1PC 3/8 FLAT WASHER, 1PC 3/8 LOCK WASHER AND 1PC 3/8 NUT.
F. SEE PAGES 2 AND 3 FOR SIZES AND ORIENTATION.
G. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
H. CLOSE BAG BY HEAT SEAL.
I. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3
J. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D
6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,
CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,
CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,
EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
A
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188 CL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collect ion of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
PE24016 (K0824) QUICK RELEASE MANIFOLD ASSEMBLY 19207 AK95945757
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-99-594-5757 29 MAY 2024
17. NOTES/DRAWING
PACKAGING MATERIALS
ITEM SIZE QTY REFERENCE
A 7 X 7 X 1/2" THICKNESS 1 A-A-55057, TY A
B 10 X 11 X 2" THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY
C 6 X 11 X 2" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY
D 3/8 X 7 HARDWARE SET 2
HARDWARE CONSISTS OF: 1PC 3/8 X 7 CARRIAGE
BOLT, 1PC 3/8 FLAT WASHER, 1PC 3/8 LOCK
WASHER AND 1PC 3/8 NUT
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -AI OMB No. 0704-0188 CL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
PE24016 (K0824) QUICK RELEASE MANIFOLD ASSEMBLY 19207 AK95945757
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-99-594-5757 29 MAY 2024
17. NOTES/DRAWING
3/8 HARDWARE
File details come from the government source that posted it. Updated .