AK16998512.pdf

PDF 624 KB Posted Feb 5, 2026

Attached to: Unmanned Vehicle Ground Federal contract opportunity
Solicitation number: SPRDL126Q0039
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Feb 5, 2026

This is a DD Form 2169 Special Packaging Instruction document dated June 29, 2022 (Revision A) for a GRIPPER component (Part Number 4524493, CAGE Code 7KJ69, National Stock Number 2360-01-699-8512, SPI Number 19207). The document specifies detailed preservation, packing, and shipping requirements for this item weighing 9.3 pounds per unit with dimensions of 26.8 x 13.0 x 9.3 inches.

The packaging instructions require military preservation using MIL-STD-2073-1 Method 41, with the item placed in a heat-sealed MIL-DTL-117 Type I, Class E bag (16 x 24 inches). Cushioning must be fabricated per specifications in Table 1, consisting of four foam pieces with cross-cutouts as detailed on page 2, then placed into an ASTM D-5118 weather-resistant corrugated fiberboard container (26½ x 12½ x 8½ inches). The container must be closed per ASTM D1974 Method 2B6. Unit packs shall be marked with shelf life markings for a 3-year extendable shelf life per MIL-STD-129. For Level A packing, wood-cleated panelboard or nailed wood boxes conforming to ASTM standards are required. For Level B packing, fiberboard or corrugated boxes per ASTM specifications are acceptable. When total shipment quantity to the same destination exceeds 125 pounds, exterior packs must be palletized per MIL-STD-147. All preservation and packing processes require inspection per MIL-STD-2073-1 and applicable container specifications.

View the file

Other files for this federal contract opportunity

Other files attached to Unmanned Vehicle Ground, newest first.
File	Type	Posted
SPRDL126Q0039.pdf	PDF	Feb 5, 2026

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved

OMB No. 0704-0188

-QT

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

4524493 (7KJ69) GRIPPER 19207

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

29 MAR 2022 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 9.3 1.875 26.8 X 13.0 X 9.3

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1 (METHOD 41) 1B 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 16 X 24

13. CLEANING

MIL-STD-2073-1 2C 1 CUSHIONING: A-A-59136, CL 1, GR A,

14. DRYING SIZE: A/R PER TABLE 1 ON PAGE 2

MIL-STD-2073-1

3D 1 CONTAINER: ASTM-D 5118, TY CF, CL WR, GR W5c,

15. PACKING ST RSC, SIZE: 26-1/2 X 12-1/2 X 8-1/2

a. LEVEL A

MIL-STD-2073-1 AND NOTE F

b. LEVEL B

MIL-STD-2073-1 AND NOTE F

16. MARKING

MIL-STD-129 AND NOTE E

17. NOTES / DRAWING

A. PRESERVATION AND PACKING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1 AND ANY APPLICABLE

CONTAINER SPECIFICATIONS.

B. PLACE ITEM IN BAG, CLOSE BY HEAT SEAL.

C. FABRICATE CUSHIONING AS SHOWN ON PAGE 2.

D. PLACE CUSHIONED ITEM INTO CONTAINER. CLOSE CONTAINER IN ACCORDANCE WITH ASTM D1974, METHOD 2B6.

E. UNIT PACK SHALL BE MARKED WITH THE APPROPRIATE SHELF LIFE MARKINGS FOR A 3-YEAR EXTENDABLE SHELF

LIFE.

F. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM D5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS

WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

AK16998512

2360-01-699-8512

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

TABLE 1 – CUSHIONING CUT LIST

ALL DIMENSIONS ARE IN INCHES AND ARE APPROXIMATE

CUSHION

NO.

SIZE QTY NOTES

1 25.5 X 12 X 2 1 BOTTOM

2 25.5 X 12 X 2 1 WITH CROSS CUTOUT AS

SHOWN

3 25.5 X 12 X 2 1 WITH CROSS CUTOUT AS