AK16159744.pdf
PDF 2 MB Posted
- Attached to
- Cylinder Assembly, Actuating, Linear
- Solicitation number
- SPRDL1-26-Q-0090
About this file
This is a DD Form 2169, Special Packaging Instruction (SPI), dated June 1997, providing detailed packaging and preservation requirements for a Linear Reacting Cylinder (Part No. 100DL0039, CAGE 0LVS7, NSN 3040-01-615-9744).
The form specifies preservation and packaging procedures following MIL-STD-2073-1, Method 20. The cylinder must be filled with operational oil, all interior openings sealed with NAS-847 caps/plugs, and wrapped in MIL-PRF-121 Type II Grade A paper (10 X 32 inches). Cushioning material conforming to ASTM-D4727 Type CF Class WR Grade W5c must be applied in specified quantities: two pieces of 3 X 70 inches, one piece of 9 X 11 inches, and eight pieces of 4 X 4 inches. Level A packing requires wood-cleated panelboard or nailed wood boxes per ASTM-D 6251 or ASTM-D 6880 (Class 2); Level B packing allows fiberboard boxes per ASTM-D 5118 or triplewall corrugated fiberboard per ASTM-D 5168 (Class 2). Containers must be closed per ASTM-D1974 Method 2B3. Marking must comply with MIL-STD-129. When total shipment weight to the same destination exceeds 125 pounds, exterior packs without skids shall be palletized per MIL-STD-147. Page 2 includes detailed visual diagrams demonstrating proper wrapping techniques and final packing configuration for the cylinder assembly.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL1-26-Q-0090.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
1BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
AF
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
100DL0039 (0LVS7) CYLINDER, LINEAR, REACTING 19207 AK16159744
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-615-9744 2-4-2020 -
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 12.2 0.359 29.4 X 4.4 X 4.8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL OIL
MIL-STD-2073-1 2-C A/R CAPS/PLUGS: NAS-847
14. DRYING 3-D 1 WRAP: MIL-PRF-121, TY II, GR A, SIZE: 10 X 32
MIL-STD-2073-1 4-E (11) CUSHIONING: ASTM-D4727, TY CF, CL WR,
15. PACKING
GR W5c, VR SW 2 3 X 70
a. LEVEL A
1 9 X 11
MIL-STD-2073-1 & NOTE G 8 4 X 4
b. LEVEL B
5-F 1 CONTAINER: ASTM-D5118, TY CF, ST FOL, CL WR,
MIL-STD-2073-1 & NOTE G GR W5c, VR SW, SIZE: 29 X 4 X 4
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL WITH OPERATIONAL OIL.
C. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
D. WRAP CYLINDER IN PAPER AND SECURE WITH TAPE.
E. PLACE CUSHIONING AS SHOWN ON PAGE 2.
F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
G. LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D
6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,
CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,
CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,
EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI OMB No. 0704-0188 AF
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
100DL0039 (0LVS7) CYLINDER, LINEAR, REACTING 19207 AK16159744
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-615-9744 2-4-2020
17. NOTES/DRAWING
WRAP 3 X 70 CORRUGATED
AROUND CYLINDER BODY,
SECURE WITH TAPE
2 PLACES
4 X 4
QTY 8
WRAP 9 X 11 CORRUGATED
AROUND CYLINDER SHAFT,
SECURE WITH TAPE
FLUTE DIRECTION
11 INCHES
9 IN
C
H
ES
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .