AK15700617.pdf
PDF 246 KB Posted
- Attached to
- Axle Assembly, Automotive Federal contract opportunity
- Solicitation number
- SPRDL1-24-R-0164
About this file
This document is a Special Packaging Instruction (SPI) for an Axle Assembly, Automotive, Driving with National Stock Number 2520-01-570-0617. The SPI provides detailed requirements for the preservation, cleaning, drying, packing, marking, and shipping of this axle assembly. It specifies the use of various materials such as preservatives, barrier paper, blocking and bracing, and container construction. Detailed dimensions and part numbers are provided for the required packaging components. This SPI supports a federal contract opportunity with Solicitation Number SPRDL1-24-R-0164 for the Axle Assembly, Automotive, issued by the Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL1-24-R-0164 (Amendment 0001).pdf | ||
| SPRDL1-24-R-0164 Conformed.pdf | ||
| SPRDL1-24-R-0164.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 11 ooff 55 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
EW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2520-01-570-0617 01/08/2016
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 2395.0 89.882 105.3 X 40.3 X 36.6
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-16173, GRADE 4
MIL-STD-2073-1 2-C A/R PRESERVATIVE: MIL-G-10924
14. DRYING 3-D A/R CAPS/PLUGS: NAS-847
MIL-STD-2073-1 4-E A/R BARRIER: MIL-PRF-121, TYPE II
15. PACKING
5-F A/R BLOCKING AND BRACING: ASTM-D6199
6-G 2 BRACKETS
a. LEVEL A
7-H 1 HARDWARE
MIL-STD-2073-1 & NOTE J 8-I 1 CONTAINER: ASTM-D7478, TY II, CL 2, ST A
b. LEVEL B
SIZE: 97-1/2 X 32-3/4 X 29-1/2
NOT APPLICABLE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED EXTERNAL METALLIC SURFACES. DO NOT APPLY
ANY PRESERVATIVE TO THE INTERIOR WALLS OF WHEEL HUBS.
C. APPLY PRESERVATIVE TO ALL GREASE (ZERKS) FITTINGS.
D. SEAL ALL FITTINGS AND OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. PLACE MIL-PRF-121 PAPER BETWEEN WOOD BLOCKING AND AXLE, SECURE TO BLOCKING USING TAPE.
SEE TABLE 1 FOR BARRIER SIZES AND LOCATIONS.
F. SECURE BLOCKING TOGETHER AND TO THE BASE OF THE CONTAINER USING NAILS CONFORMING TO
ASTM-F1667, SEE FIGURES 1, 3 – 5 FOR BLOCKING SIZES AND ORIENTATION.
G. BRACKETS SHALL BE FABRICATED FROM COMMERCIAL GRADE PLATE STEEL. BRACKETS SHALL BE FORMED BY BENDING AND BE PAINTED, PLATED OR PRESERVED USING MIL-PRF-16173, GR 4. ATTACH BRACKETS TO BLOCKING USING ITEM J IN TABLE 1. SEE FIGURES 2, 4 & 5 FOR BRACKET DRAWINGS
AND PLACEMENT.
H. ALL HARDWARE SHALL BE ZINC PLATED AND CONFORM TO ASTM-F2329. SEE TABLE 1 AND FIGURES 4 &
5 FOR SIZES AND LOCATIONS.
I. CONTAINER IS TO BE CONSTRUCTED WITH 3 SKIDS WITH THE MIDDLE SKID CENTERED IN THE
CONTAINER WIDTH. PLACE AXLE ASSEMBLY INTO CONTAINER AS SHOWN IN FIGURE 6. CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D7478.
J. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 22 ooff 55
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188 EW
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2520-01-570-0617 01/08/2016
TABLE 1 – BILL OF MATERIAL
ITEM SIZE QTY DESCRIPTION REFERENCE
A
2 (NOM) X 6 (NOM) X
32-3/4 OVERALL
LENGTH
10 ASTM-D6199 SEE FIGURES 4 & 5
B
2 (NOM) X 6 (NOM) X
14-1/2 OVERALL
LENGTH BEVEL ONE
END 45 DEGREES
2 ASTM-D6199 SEE FIGURES 1, 4 – 6
C BRACKET 2 COMMERCIAL GRADE PLATE
STEEL SEE FIGURES 2, 4 & 5
D
4 (NOM) X 4 (NOM) X
23-1/2 OVERALL
LENGTH
2 ASTM-D6199 SEE FIGURES 3 & 4
E 5 X 10 2 MIL-PRF-121, TYPE II
PLACE BETWEEN ITEM
D AND AXLE, NOT
PICTURED
F 8 X 12 2 MIL-PRF-121, TYPE II
PLACE BETWEEN
ITEMS A, B & C AND
AXLE, NOT PICTURED
G 3/4 X 24” HARDWARE
SET 4
HARDWARE SET CONSISTS OF:
1PC 1/2 X 20” CARRIAGE BOLT,
1PC 1/2 FLAT WASHER, 1PC 1/2
LOCK WASHER, AND 1 PC 1/2
NUT
SEE FIGURES 4 & 5
H 1/2 X 14” HARDWARE
SET 2
HARDWARE SET CONSISTS OF:
1PC 1/2 X 14” CARRIAGE BOLT,
1PC 1/2 FLAT WASHER, 1PC 1/2
LOCK WASHER, AND 1 PC 1/2
NUT
SEE FIGURES 4 & 5
I 1/2 X 15” HARDWARE
SET 2
HARDWARE SET CONSISTS OF:
1PC 1/2 X 15” CARRIAGE BOLT,
1PC 1/2 FLAT WASHER, 1PC 1/2
LOCK WASHER, AND 1 PC 1/2
NUT
SEE FIGURES 4 & 5
J 3/8 X 6” BRACKET
HARDWARE SET 4
HARDWARE SET CONSISTS OF:
1PC 3/8 X 5” LAG BOLT AND
1 PC 3/8 FLAT WASHER
ALL LAG SCREWS
LOCATIONS SHALL BE
PRE-DRILLED WITH 1/4
DIAMETER BIT, NOT
PICTURED
FIGURE 1 - ITEM B DIMENSIONS (SIDE VIEW)
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 33 ooff 55
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617
FIGURE 2 – ITEM C BRACKET DIMENSIONS
FIGURE 3 – ITEM D DIMENSIONS (TOP VIEW)
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 44 ooff 55
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617
FIGURE 4 – ITEM A – I LOCATIONS IN CONTAINER
FIGURE 5 - ITEM A - C AND HOLE LOCATIONS ON CONTAINER BASE (TOP VIEW)
A (2 STACKS OF 5)
B
C (X2)
D I (X2 AGAINST
ITEM B)
G (X4 AGAINST
ITEM D)
H (X2 AGAINST
ITEM A)
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 55 ooff 55
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617
FIGURE 6 – ORIENTATION OF AXLE IN CONTAINER
B
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .