AK14889655.pdf

PDF 289 KB Posted Aug 20, 2025

Attached to: COMBINED SYNOPSIS & SOLICITATION: RECOVERY CHARGER NSN:4210-01-488-9655
Solicitation number: W912CH25R0134
Issued by: Department of the Army

About this file

Written by GovTribe AI · Aug 20, 2025

This document is a Special Packaging Instruction (DD Form 2169) for a Dry Powder Support Unit (Part Number 12988444), dated August 25, 2021. The document provides detailed packaging, preservation, and shipping instructions for a complex military equipment assembly that consists of four primary components: a Main Assembly Unit, Canister Assembly, Sprayer Assembly, and Mounting Kit. The National Stock Number is 4210-01-488-9655, with a Revision B status.

The packaging instructions specify precise steps for preparing each assembly for shipment, including how to arrange components within specified containers, use of cushioning materials, securing hardware, and segregating smaller parts into labeled bags. The document includes a comprehensive Bill of Materials listing 25 different items with specifications ranging from plywood base and bolts to specialized containers and cushioning materials. The packaging follows multiple military standards including MIL-STD-2073-1, MIL-STD-129, and various ASTM specifications, ensuring consistent and protective preparation of the equipment for transportation and storage.

View the file

Other files

File	Type	Posted
W912CH25R0134-0001.pdf	PDF	Aug 20, 2025
W912CH25R0134.pdf	PDF	Aug 20, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

8DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 8 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

5. DATE OF DRAWING

AUG 25, 2021 B

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 291.0 24.306 50.0 X 24.0 X 35.0

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

SEE THE NOTES

15. PACKING

a. LEVEL A

MIL-STD-2073-1 AND NOTE K

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE J

17. NOTES / DRAWING

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED. REFER TO THE BILL OF MATERIALS FOR ALL OF THE CIRCLED NUMBERS AND THE REFERENCED ITEM NUMBERS ON THE ACCOMPANYING PAGES.

B. THE DRY POWDER SERVICE UNIT, P/N 12988444, CONSISTS OF THE FOLLOWING 3 ASSEMBLIES AND A

MOUNTING KIT:

SEGREGATED

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY.

1 12988450 19200 MAIN ASSEMBLY UNIT 1

2 12988467 19200 CANISTER ASSEMBLY 1

3 12988471 19200 SPRAYER ASSEMBLY 1

4 12988261 19207 MOUNTING KIT 1

C. THE SPRAYER ASSEMBLY, P/N 12988471, CONSISTS OF THE FOLLOWING ITEMS:

SEGREGATED

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY.

5 CT-535 NYLON WASHER 4

6 UR-300 80756 SNAP RING 1

7 12988468 19200 SPRAYER HOUSING 1

8 12988469 19200 VENT 1

9 12988470 19200 HOUSING CONNECTOR 1

10 12988472 19200 RETAINER 1

11 12988474 19200 SPRAYER MACHINED 1

12 3237K66 3A054 WASH GUN 1

13 54635K1 3A054 AIR SUPPLY LINE 1

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 8 Pages

D. THE INSTALLATION KIT, P/N 12988261, CONSISTS OF THE FOLLOWING ITEMS:

SEGREGATED

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY.

14 MIL-DTL-45913C NUT, SELF LOCKING 12

15 ANSI B18.22.1 FLAT WASHER 20

16 S-7R4-PM6-PM4-120 THERMOPLASTIC HOSE 1

17 12988521 19200 HANGER, SPRAYER WAND 2

18 6448K46 3A054 CAP, RUBBER 2

19 NSN: 4820-01-035-6274 VALVE, REGULATING 1

20 ASME B-18.2.1 SCREW, HEX HEAD 8

21 12500653 19207 RESET TOOL 1

22 NSN: 5120-01-428-7911 HEX KEY WRENCH 1

23 NSN: 5120-00-228-9506 COMBINATION WRENCH 1

24 NSN: 4730-01-276-6942 QUICK DISCONNECT 1

E. 12988450, MAIN ASSEMBLY UNIT, QUANTITY 1.

1. PLACE THE MAIN ASSEMBLY UNIT ON THE PLYWOOD BASE, ITEM 1, AS IT IS ILLUSTRATED ON PAGE 6.

FASTEN THE MAIN ASSEMBLY UNIT TO THE PLYWOOD BASE WITH THE ATTACHING HARDWARE, ITEMS

2, 3, 4, AND 5.

2. POSITION AND LOCK THE BASE CLAMP (P/N 12988458) SO THAT THE ARM ASSEMBLIES (P/N 12988456 AND P/N 12988457) ARE ORIENTED IN THE VERTICAL POSITION, AS IT IS ILLUSTRATED ON PAGE 6.

3. CLAMP THE WOOD BLOCKING, ITEM 11, BETWEEN THE RIGHT AND LEFT ARM ASSEMBLIES OF THE

BASE CLAMP.

F. 12988467, CANISTER ASSEMBLY, QUANTITY 1.

1. PLACE THE CANISTER ASSEMBLY IN CONTAINER, ITEM 7A.

2. COIL THE HOSE AND BAG ON TOP OF THE CANISTER UNIT.

3. CLOSE THE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

G. 12988471, SPRAYER ASSEMBLY, QUANTITY 1.

1. PLACE ONE CUSHIONING, ITEM 9, ON THE BOTTOM OF THE CONTAINER, ITEM 7B.

2. PLACE THE SPRAYER ASSEMBLY AND SEGREGATED PACKAGES 5 THROUGH 13 INTO THE CONTAINER.

3. PLACE THE SECOND CUSHIONING, ITEM 9, ON TOP OF THE SPRAYER ASSEMBLY AND THE ACCESSORY

ITEMS.

4. CLOSE THE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

5. DATE OF DRAWING

AUG 25, 2021 B

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 8 Pages

H. 12988261, MOUNTING KIT, QUANTITY 1.

1. PLACE THE TOTAL QUANTITY OF NUT, SELF LOCKING, P/N MIL-DTL-45913C, INTO A BAG, ITEM 15B.

CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 14.

2. PLACE THE TOTAL QUANTITY OF FLAT WASHER, P/N ANSI B18.22.1, INTO A BAG, ITEM 15B. CLOSE THE

BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 15.

3. COIL THE THERMOPLASTIC HOSE, P/N S-7R4-PM6-PM4-120, TO 10 X 10. PLACE THE COILED THERMOPLASTIC HOSE INTO A BAG, ITEM 15F. CLOSE THE BAG BY HEAT SEALING, TAPING, OR

STAPLING TO FORM SEGREGATED PACKAGE 16.

4. PLACE THE TOTAL QUANTITY OF HANGER, SPRAYER WAND, P/N 12988521, INTO A BAG, ITEM 15D.

CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 17.

5. DUST THE TOTAL QUANTITY OF CAP, RUBBER, P/N 6448K46 WITH TALC, ITEM 13. PLACE THE TOTAL QUANTITY INTO A BAG, ITEM 15B. CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM

SEGREGATED PACKAGE 18.

6. WRAP THE VALVE, REGULATOR, P/N NSN: 4820-01-035-627, WITH CUSHIONING, ITEM 14. SECURE THE CUSHIONING WITH TAPE. PLACE THE PREPARED VALVE, REGULATOR INTO A BAG, ITEM 15G. CLOSE

THE BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 19.

7. PLACE THE TOTAL QUANTITY OF SCREW, HEX HEAD, P/N ASME B-18.2.1, INTO A BAG, ITEM 15D. CLOSE

THE BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 20.

8. PLACE THE RESET TOOL, P/N 12500653, INTO A BAG, ITEM 15E. CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 21.

9. PLACE THE HEX KEY WRENCH, P/N NSN: 5120-01-428-7911 INTO A BAG, ITEM 15C. CLOSE THE BAG BY

HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 22.

10. PLACE THE COMBINATION WRENCH, P/N NSN: 5120-00-228-9506 INTO A BAG, ITEM 15A. CLOSE THE

BAG BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 23.

11. PLACE THE QUICK DISCONNECT, P/N NSN: 4730-01-276-6942 INTO A BAG, ITEM 15B. CLOSE THE BAG

BY HEAT SEALING, TAPING, OR STAPLING TO FORM SEGREGATED PACKAGE 24.

12. PLACE SEGREGATED PACKAGES 14 THROUGH 24 INTO A BAG, ITEM 15H, TO FORM THE MOUNTING KIT.

CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING.

I. PACKAGE THE COMPONENTS FROM NOTES E, F, G, AND H AS FOLLOWS:

1. PLACE EMPTY CONTAINER, ITEM 7C, INTO BAG, ITEM 10.

2. PLACE THE BAGGED CONTAINER FROM STEP I.1. INTO CONTAINER, ITEM 8.

3. PLACE THE CONTAINER/BAG/CONTAINER FROM STEP I.2. INTO CONTAINER, ITEM 12.

4. HOIST AND LOWER THE MAIN ASSEMBLY INTO THE PREPARED

CONTAINER/BAG/CONTAINER/CONTAINER FROM STEP I.3.

5. PLACE THE PREPARED CANISTER ASSEMBLY ALONG SIDE OF THE MAIN ASSEMBLY, AS IT IS

ILLUSTRATED ON PAGE 7.

6. ASSEMBLE THE SLEEVE, ITEM 6, AS IT IS SHOW ON PAGE 6. SECURE THE SLEEVE IN PLACE WITH

TAPE. PLACE THE SLEEVE AROUND THE MAIN ASSEMBLY UNIT.

7. INSERT THE ACCESSORY CONTAINER, ITEM 7B, INTO SLOT 1.

8. DETACH THE UPPER HOSE AND PLACE IT THROUGH SLOT 2.

9. PLACE THE BAGGED INSTALLATION KIT, FROM NOTE H, IN THE CONTAINER.

10. CLOSE THE CONTAINER, ITEM 7C, IN ACCORDANCE WITH ASTM-D1974 METHOD 2B6.

11. CLOSE THE BAG, ITEM 10, BY HEAT SEALING.

12. CLOSE THE CONTAINER, ITEM 8, IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

13. CLOSE THE CONTAINER, ITEM 12, USING SCREWS.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 8 Pages

J. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 IDENTIFYING THE ITEMS WITHIN THE DRY POWDER SERVICE UNIT. ON THE SEGREGATED PACKING LIST, IDENTIFY THE

ITEMS WITHIN EACH SEGREGATED PACK TOGETHER WITH THEIR SEGREGATED PACK NUMBER.

K. THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A AND LEVEL B SHIPPING CONTAINER.

L. INSPECT THE PRESERVATION, THE UNIT PACK, AND THE PACKAGING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 8 Pages

PLYWOOD BASE1

45-3/8

1 RAD., 4 PLACES

6-1/2

WOOD BLOCKING11

5-1/2

DIAMETER

** PLYWOOD THICKNESS TO BE 3/4 INCHES

9/32 DIA., THRU 9 PLACES

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 8 Pages

SLEEVE6

2-1/2

27-1/4

54-3/4

90-1/2

91-1/2

98-1/2

109-1/2

34-3/4

38-3/4

39-1/2

46-3/4

53-3/4

REVERSE

SLIT SCORE

SCORE LINESFLUTE DIRECTION

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 8 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 8 Pages

*COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING OR PRESERVATIVE COATING

TO MIL-PRF-16173, GRADE 4.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12988444 (19207) DRY PWD SUPPORT UNI 19207 AK14889655

4. NATIONAL STOCK NUMBER 6. REVISION

4210-01-488-9655

5. DATE OF DRAWING

AUG 25, 2021 B

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 PLYWOOD BASE SEE PAGE 5 A-A-55057, TYPE A 1

2* BOLT, CARRIAGE 1/4 X 3 COMMERCIAL GRADE 9

3* WASHER, FLAT 1/4 COMMERCIAL GRADE 9

4* WASHER 1/4 COMMERCIAL GRADE 9

5* NUT, HEXAGON 1/4 COMMERCIAL GRADE 9

6 SLEEVE SEE PAGE 7 ASTM-D4727, TYPE CF, CLASS D,

VARIETY TW, GRADE 1100.

7 CONTAINER ASTM-D5118, TYPE CF, CLASS D,

STYLE RSC, VARIETY SW, GRADE

2OO.

7A 19 X 8-3/4 X 24-1/4 1

7B 36-1/8 X 6-5/8 X 9-1/8 1

7C 45-3/4 X 20-3/8 X 28-1/4 1

8 CONTAINER 46-5/8 X 21 X 29-1/4 ASTM-D5118, TYPE CF, CLASS WR,

STYLE RSC, VARIETY SW, GRADE W5c.

9 CUSHIONING 36 X 6-1/2 X 2 MIL-PRF-26514, CLASS 2, GRADE A. 2

10 BAG 60 X 71 MIL-DTL-117, TYPE I, CLASS E, STYLE

11 WOOD BLOCKING SEE PAGE 5 ASTM-D6199, CLASS 2, GROUP II OR III. 1

12 CONTAINER 47-1/2 X 21-1/2 X 30-1/2 ASTM-D6251, STYLE I, CLASS 2. 1

13 TALC A-A-59303, TYPE T1. A/R

14 CUSHIONING 27 X 15 X 1/4 A-A-59135, CLASS 1. 1

15 BAG MIL-DTL-117, TYPE III, CLASS B, STYLE

15A 2 X 8 1

15B 3 X 5 4

15C 4 X 6 1

15D 4 X 8 2

15E 6 X 6 1

15F 14 X 15 1

15G 16 X 18 1

15H 23 X 26 1

File details come from the government source that posted it. Updated Aug 20, 2025.