AK13705458 REV C.pdf

PDF 460 KB Posted

Attached to
Solicitation for the Parts Kit, Pressure NSN: 4810-01-370-5458
Solicitation number
W912CH25R0039
Issued by

About this file

Written by GovTribe AI ·

This DD Form 2169C is a Special Packaging Instruction (SPI) for a Parts Kit, Pressure with National Stock Number 4810-01-370-5458, Revision C, dated 30 JUL 2024. The document provides detailed packaging and preservation instructions for a kit containing a valve (12336770-1), two different O-rings (M83248/1-033 and M83248/1-906), and three hex head screws (B1821BH025C050L). The packaging requires specific preparation steps for each component, including use of stiffeners, bags, caps, and wrapping, with segregated packaging and precise positioning within a container.

The kit is part of a sole-source solicitation (W912CH25R0039) by the Army Contracting Command - Detroit, awarded to Honeywell International under NAICS code 332911 for Industrial Valve Manufacturing. The packaging must comply with military standards MIL-STD-2073-1 and MIL-STD-129, with options for Level A (wood-cleated panelboard or nailed wood boxes) and Level B (fiberboard boxes) packaging. Quality assurance provisions include inspection of preservation, unit pack, and packing in accordance with specified military standards.

View the file

Other files

File Type Posted
W912CH25R0039.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169C, JUN 1997 (EG) wct 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

5705519 (19207) PARTS KIT,PRESSURE 19207 AK13705458

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4810-01-370-5458 30 JUL 2024 C

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

001 NONE 11.2 1.238 14.8 X 14.6 X 9.9

12. MILITARY PRESERVATION

MIL-STD-2073-1, SEE BLOCK 17

18.

STEPS

19.

REQD

20.

DESCRIPTION

13. CLEANING

MIL-STD-2073-1

14. DRYING

MIL-STD-2073-1

15. PACKING

SEE NOTES

a. LEVEL A

MIL-STD-2073-1 AND NOTE L

b. LEVEL B

MIL-STD-2073-1 AND NOTE L

16. MARKING

MIL-STD-129 AND NOTE K

17. NOTES/ DRAWING

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED. REFER TO THE BILL OF MATERIALS FOR

REFERENCED ITEM NUMBERS ON ACCOMPANYING PAGES.

B. THIS KIT CONTAINS THE FOLLOWING ITEMS SEGREGATED AS SHOWN BELOW: (NOTE, THE KIT CONTENTS

ARE BASED ON REVISION C OF DRAWING 5705519).

SEGREGATED

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY

1 12336770-1 19207 VALVE 1

2 M83248/1-033 0U583 O-RING 1

3 B1821BH025C050L 05047 SCREW, HEX HD, 1/4 -20 X 1/2 3

4 M83248/1-906 0U583 O-RING, 3/8 TUBE OD 1

C. PREPARE ONE 12336770-1 VALVE IN ACCORDANCE WITH THE FOLLOWING STEPS:

1. CAP (ITEM 3): NAS OR EQUIVALENT. PLACE CAPS ON CONNECTORS OF VALVE. IF VALVE IS

RECEIVED WITH CAPS INSTALLED THEN THIS STEP MAY BE ELIMINATED.

2. WRAP (ITEM 4): A-A-3174, POLYETHYLENE, THICKNESS 4 MIL. SECURE WITH TAPE.

2. IDENTIFICATION: IDENTIFY THE PREPARED PART WITH “SEGREGATED PACKAGE 1.”

3. INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

DD FORM 2169C, JUN 1997 (EG) wct 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

D. PREPARE ONE M83248/1-033 O-RING IN ACCORDANCE WITH THE FOLLOWING STEPS:

1. STIFFENER (ITEM 1): ASTM-D4727, TYPE SF, CLASS D, THICKNESS 0.040, SIZE: 2-3/4 X 2-3/4. POSITION

PART BETWEEN SPECIFIED STIFFENERS AND SECURE WITH TAPE IN SUCH A MANNER THAT THE

TAPE WILL NOT TOUCH OR EXCERT PRESSURE THAT WOULD SUBJECT THE PART TO SET OR

DISTORTION.

2. BAG (ITEM 2): MIL-DTL-117, TYPE II, CLASS C, SIZE: 4 X 6. CLOSE BY HEAT SEALING.

3. IDENTIFICATION: IDENTIFY THE PREPARED PART WITH “SEGREGATED PACKAGE 2.”

4. INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

E. PREPARE THREE B1821BH025C050L SCREW, HEX HD, 1/4 -20 X 1/2 IN ACCORDANCE WITH THE FOLLOWING

STEPS:

1. BAG (ITEM 2): MIL-DTL-117, TYPE II, CLASS C, SIZE: 4 X 6. CLOSE BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE PREPARED PART WITH “SEGREGATED PACKAGE 3.”

3. INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

F. PREPARE ONE M83248/1-906 O-RING, 3/8 TUBE OD IN ACCORDANCE WITH THE FOLLOWING STEPS:

1. BAG (ITEM 2): MIL-DTL-117, TYPE II, CLASS C, SIZE: 4 X 6. CLOSE BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE PREPARED PART WITH “SEGREGATED PACKAGE 4.”

3. INSPECT THE SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

G. TAPE SEGREGATED PACKAGES 2 THRU 4 FROM NOTES C THRU F TO A FLAT SURFACE OF SEGREGATED

PACKAGE NUMBER 1.

H. PLACE PREPARED PARTS FROM NOTE G INTO BAG (ITEM 5). CLOSE BY HEAT SEALING.

I. PREPARE CUSHIONING (ITEMS 6A, 6B, AND 6C). POSITION PREPARED CUSHIONING IN CONTAINER (ITEM 7), AS SHOWN IN FIGURE 1.

J. PLACE BAGGED PARTS FROM NOTE H INSIDE PREPARED CUSHIONING. CLOSE CONTAINER IN

ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

K. MARKING.

MARK THE UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. IN ADDITION, PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 IDENTIFYING THE ITEMS WITHIN THE KIT. ON THE PACKING LIST, IDENTIFY THE ITEMS WITHIN EACH SEGREGATED PACKAGE TOGETHER WITH THEIR

SEGREGATED PACKAGE NUMBER.

L. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D6880, CLASS 2.

LEVEL B: PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION. WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR

PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

M. QUALITY ASSURANCE PROVISION

1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH TM 38-701 AND THE APPLICABLE CONTAINER

SPECIFICATIONS.

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

5705519 (19207) PARTS KIT,PRESSURE 19207 AK13705458

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4810-01-370-5458 30 JUL 2024 C

DD FORM 2169C, JUN 1997 (EG) wct 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

FIGURE 1:

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

5705519 (19207) PARTS KIT,PRESSURE 19207 AK13705458

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4810-01-370-5458 30 JUL 2024 C

DD FORM 2169C, JUN 1997 (EG) wct 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

5705519 (19207) PARTS KIT,PRESSURE 19207 AK13705458

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4810-01-370-5458 30 JUL 2024 C

BILL OF MATERIALS

ITEM

NUMBER

DESCRIPTION

SIZE

SPECIFICATION DATA

QTY.

STIFFENER

BAG

2-3/4 X 2-3/4 X 0.040 4 X 6

ASTM-D4727, TYPE SF, CLASS D

MIL-DTL-117, TYPE II, CLASS C

3 CAP A/R NAS831 OR EQUIVALENT 4

4 WRAP 30 X 15 A-A-3174, POLYTEHYLENE, 1

THICKNESS 4 MIL.

5 BAG 17 X 18 MIL-DTL-117, TYPE I, CLASS E 1

CUSHIONING A-A-59136, CLASS 1, GRADE A, TYPE I

6A 10-1/4 X 9-1/2 X 2 2

6B 14 X 9-1/2 X 2 2

6C 10-1/4 X 10 X 2 2

7 CONTAINER 14-1/4 X 9-1/2 X 14 ASTM-D5118, TYPE CF, CLASS WR, 1

STYLE RSC, VARIETY SW, GRADE W5c

File details come from the government source that posted it. Updated .