AK12090933.pdf
PDF 111 KB Posted
- Attached to
- Pump Fuel Meteringa
- Solicitation number
- SPRDL126Q0060
About this file
This is a DD Form 2169, Special Packaging Instruction, dated October 30, 2020, for a fuel pump (PUMP, FUEL, MET) with National Stock Number 2910-01-209-0933. The item, identified by part number 2W0256 under CAGE 11083, has dimensions of 21.5 x 13.2 x 10.0 inches and weighs 55.1 pounds per unit. The unit pack weight is 105.1 pounds with a cubic footage of 5.261 and dimensions of 29.0 x 19.0 x 16.50 inches.
The packaging requirements specify Level A packing using military preservation standards (MIL-STD-2073-1, Method 42) and include detailed procedures for cleaning, drying, and packing the item. The process involves capping and plugging open ports, wrapping with cushioning materials (PPP-C-1797 and A-A-59136), placing the item in a corrugated container lined with 1-inch plank foam, heat-sealing in a moisture barrier bag (MIL-DTL-117), wrapping to prevent barrier contact with wood, and constructing an exterior wooden container (ASTM-D6880, Class 2) conforming to specifications. For shipments exceeding 125 pounds to the same destination, exterior packs without skids must be palletized in accordance with MIL-STD-147. All preservation and packaging must be inspected per MIL-STD-2073-1D, and marking shall follow MIL-STD-129.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126Q0060.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
17. NOTES/ DRAWING
A. PRESERVATION AND PACKAGING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1D AND ANY
APPLICABLE CONTAINER SPECIFIATIONS.
B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PRESERVATIVE AND PACKAGING
MATERIALS.
C. CAP AND PLUG OPEN PORTS.
D. WRAP ITEM WITH CUSHIONING, SECURE WITH TAPE. ADDITIONALLY DOUBLE WRAP ANY PROTRUDING PARTS AS
REQUIRED, SECURING WITH TAPE.
E. CONSTRUCT INTERIOR CONTAINER.
F. USE 1 INCH PLANK FOAM TO FULLY LINE EACH WALL OF CORRUGATED CONTAINER WITH TO ACHIEVE FULL ENCAPSULATION. PLACE CUSHIONED ITEM INTO CONTAINER, AND CLOSE CONTAINER IN ACCORDANCE WITH
CONTAINER SPECIFICATION.
G. PLACE CUSHIONED CONTAINER INTO BAG, CLOSE BY HEAT SEAL.
H. WRAP BAGGED CONTAINER TO PREVENT BARRIER CONTACT WITH WOOD. SECURE WITH TAPE.
I. CONSTRUCT EXTERIOR WOODEN CONTAINER, CLOSE IN ACCORDANCE WITH CONTAINER SPECIFICATION.
J. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR
PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
Item Dimensions (IN) 21.5 X 13.2 X 10.0 Item Weight 55.1.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188 XAF
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
2W0256 (11083) PUMP,FUEL,MET 19207 AK12090933
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2910-01-209-0933 10/30/2020 -
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH 000 105.1 5.261 29.0 X 19.0 X 16.50 IN
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 42
13. CLEANING 1-C A/R CAPS/PLUGS: NAS847
MIL-STD-2073-1 AND NOTE B 2-D 1 CUSHIONING: PPP-C-1797, 1/4 IN THK, SIZE: 50 X 35 IN.
14. DRYING 3-E 1 CONTAINER : ASTM-D5118, TY CF, CL DOM, STY FOL,
MIL-STD-2073-1 AND NOTE B GR 275, SIZE: 25 X 16-1/2 X 13-1/2 IN
15. PACKING 2-F 6 CUSHIONING: A-A-59136, CL1, GR A, 1 IN THK, SIZE: A/R
4-G 1 BAG : MIL-DTL-117, TY I, CL E, ST 1, SIZE: 65 X 43 IN.
a. LEVEL A 5-H 1 WRAP: MIL-PRF-121, TY II, SIZE: 66 X 44 IN
MIL-STD-2073-1 6-J 1 CONTAINER : ASTM-D6880, CL 2, STY 2,
b. LEVEL B SIZE: 26 X 17-1/2 X 15 IN.
NOT APPLICABLE
16. MARKING
MIL-STD-129
File details come from the government source that posted it. Updated .