AK11943216_B.pdf
PDF 60 KB Posted
- Attached to
- Cylinder Outrigger
- Solicitation number
- SPRDL1-24-R-0083
About this file
This document is a Special Packaging Instruction (SPI) for a Cylinder Outrigger with NSN 2590-01-194-3216 and manufacturer part number 6-372-002205. The SPI provides detailed requirements for the preservation, packaging, and marking of this item in accordance with military standards. Key details include:
The item requires inspection of the preservation and unit packing per MIL-STD-2073-1, filling with preservative, sealing of all openings, and single wrapping of the item in accordance with specified materials. The unit container is the shipping container, constructed using 1-inch nominal lumber with 2-inch nominal ends. The item has a unit pack size of 8.2 x 9.2 x 87.5 inches and a unit pack weight of 3.82 pounds.
The related federal contract opportunity is a solicitation (SPRDL1-24-R-0083) for the Cylinder Outrigger, with a base quantity of 20 and an option for 100% increase. The solicitation closes on July 27, 2024 at 1PM EST. The contracting agency is the Defense Logistics Agency Land and Maritime.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL124R0083.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
2590-01-1943216 02/25/09
AK11943216
B
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
6-372-002205 (12361) CYLINDER 19207
A. QUALITY ASSURANCE PROVISIONS, PRESERVATION: INSPECT THE PRESERVATION AND UNIT PACK IN
ACCORDANCE WITH MIL-STD-2073-1.
B. WITH RODS FULLY RETRACTED, FILL WITH PRESERVATIVE USING MANUFACTURER'S RECOMMENDED LUBRICANT.
THOUROUGHLY DRAIN EXCESS.
C. CAPS/PLUGS: SEAL ALL OPENINGS WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.
D. PRESERVATIVE: APPLY TO BARE, UNPLATED, UNPAINTED METALLIC SURFACES.
E. WRAP: SINGLE WRAP REQUIRED. COMPUTE SIZE IN ACCORDANCE WITH MIL-STD-2073-1. SECURE WRAP WITH
TAPE.
F. CONTAINER: CONSTRUCT USING 1" NOMINAL LUMBER WITH 2" NOMINAL ENDS AND NO END CLEATS REQUIRED.
G. PACKING: THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
1 EACH NONE 0125.0 0003.820
MIL-STD-2073-1D, METHOD 20
MIL-STD-2073-1D
MIL-STD-2073-1D
10. UNIT PACK CU. (CU. FT.) 11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1D AND NOTE G
NOT APPLICABLE
MIL-STD-129
087.5 009.2 008.2X X
b. LEVEL B
16. MARKING
a. LEVEL A
1B 2C 3D 4E
6F
PRESERVATIVE: SEE NOTES
CAPS/PLUGS: NAS847
PRESERVATIVE: MIL-PRF-16173, GR 4
WRAP: MIL-PRF-121, TY I, SIZE A/R.
BLOCKING AND BRACING: ASTM-D6199, SEE PG 2
CONTAINER: ASTM-D6880, ST 1, CL 2,
SIZE: 84-1/2 X 6-5/8 X 4-3/4
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
2590-01-1943216 02/25/09
AK11943216
B
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
6-372-002205 (12361) CYLINDER 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
File details come from the government source that posted it. Updated .