AK11174344- Special Packaging Instruction (1).pdf

PDF 4 MB Posted Dec 15, 2025

Attached to: W912CH26R0015 AUTOMATIC STAND MAINTENANCE
Solicitation number: W912CH26R0015
Issued by: Department of the Army

About this file

Written by GovTribe AI · Dec 15, 2025

This document is a Special Packaging Instruction (DD Form 2169) for a Maintenance, Automotive Engine Stand (NSN 4910-01-117-4344). The document provides detailed packaging and preservation instructions for a complex automotive maintenance stand with 22 individual components, including a toolbox, various pins, screws, retaining rings, a handle assembly, wheels, a jack, adapter plates, side plates, gear housing, and an engine stand base.

The packaging instructions specify precise wrapping, bagging, and cushioning requirements for each component using military standards (MIL-STD-2073-1, MIL-STD-129), with specific guidelines for preserving metallic surfaces, securing items, and consolidating components into a modified ASTM-D6256 Type II, Class 2, Style A container. The container will be secured with lag screws and includes detailed orientation diagrams for component placement, cushioning, and bracing. The packaging is dated 19 OCT 22 and is designed to protect the automotive engine stand during shipping and storage.

View the file

Other files

File	Type	Posted
W912CH26R0015FINAL.pdf	PDF	Dec 15, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 12 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE, FA

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

.1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 1050.0 65.267 58.3 X 53.0 X 36.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, SEE NOTES C – Z

13. CLEANING 1 A/R ITEM PREPERATION: SEE NOTES C – V & X – Y

MIL-STD-2073-1 2 A/R CONSOLIDATION: SEE NOTES W & Z

14. DRYING

MIL-STD-2073-1

15. PACKING

a. LEVEL A

MIL-STD-2073-1 & NOTE BB

b. LEVEL B

NONE

16. MARKING

MIL-STD-129 & NOTE AA

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PART NUMBER 1U5750 STAND, MAINTENANCE, AUTOMOTIVE ENGINE, QUANTITY: 1, CONSISTS OF THE

FOLLOWING:

SEGREGATED PACK

NUMBER (SPN)

PART

NUMBER

QUANTITY DESCRIPTION

1 4490 1 TOOLBOX

2 12365 4 RETAINING RING

3 12306 4 NUT

4 204525 1 PIN

5 204521 1 PIN

6 16469 2 HEX HD CAP SCREW

7 204522 2 LOCKING SCREW ASSEMBLY

8 10247 2 LOCKWASHER

9 205029 4 SPACER

10 12334 3 SOCKET HEAD CAP SCREW

11 19654 4 CAP SCREW

12 MB990607-01 1 SOCKET

13 19656 4 CAP SCREW

14 11902 4 RETAINING RING

15 302889 1 HANDLE ASSEMBLY

16 17786 2 WHEEL

17 24512 2 PIN

18 53780 1 12-TON JACK

19 61103 1 ADAPTER PLATE

20 52083 2 SIDE PLATE

http://www.dlis.dla.mil/webflis/pub/pub_search.aspx?niin=4910015673917&newpage=1

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 A11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

17.17. NOTES/DRAWING

21 60551 1 GEAR HOUSING

22 60539BL2 1 ENGINE STAND BASE

C. PREPARE SPN 1, PART NUMBER 4490, TOOLBOX, QUANTITY: 1, AS FOLLOWS:

1. WRAP: MIL-PRF-121, TY II, SIZE: 24 X 38, WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH

TAPE ASTM-D6123.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEG GREGATED PACK NUMBER 1”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

D. PREPARE SPN 2, PART NUMBER 12365, RETAINING RING, QUANTITY: 4, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 3 X 5, PLAACE ALL ITEMS (4) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 2”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 20.

E. PREPARE SPN 3, PART NUMBER 12306, NUT, QUANTITY: 4, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 3 X 5, PLACE ALL ITEMS (4) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 3”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 20.

F. PREPARE SPN 4, PART NUMBER 204525, PIN, QUANTITY: 1, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 6 X 8, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 4”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 20.

G. PREPARE SPN 5, PART NUMBER 204521, PIN, QUANTITY: 1, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 4 X 6, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 5”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 20.

H. PREPARE SPN 6, PART NUMBER 16469, HEX HD CAP SCREW, QUANTITY: 2, AS FOLLOWS:

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 5, PLACE ALL ITEMS (2) INTO ONE BAG. CLOSE

BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 6”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

2. CAGE 3. SPI NO.1. PART OR DRAWING NO. (CAGE) NOMENCLATURE

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

18.17. NOTES/DRAWING

,� PREPARE SPN 7, PART NUMBER 204522, LOCK ING SCREW ASSEMBLY, QUANTITY: 2, AS FOLLOWS:

�� BAG: MIL-DTL-22020, CL 1, SIZE: 10 X 12, PLACE ALL ITEMS (2) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

�� IDENTIFICATION: IDENTIFY ITEM AS “SEG GREGATED PACK NUMBER 7”.

�� INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

,,� PREPARE SPN 8, PART NUMBER 10247, LOCKWASHER, QUANTITY: 2, AS FOLLOWS:

�� BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 5, PLACE ALL ITEMS (2) INTO ONE BAG. CLOSE

BAG BY HEAT SEAL OR TAPE.

�� IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 8”.

�� INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 10.

,,,� PREPARE SPN 9, PART NUMBER 205029, SPACER, QUANTITY: 4, AS FOLLOWS:

�� BAG: MIL-DTL-22020, CL 1, SIZE: 4 X 6, PLACE ALL ITEMS (4) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

�� IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 9”.

�� INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

,9� PREPARE SPN 10, PART NUMBER 12334, SOCKET HEAD CAP SCREW, QUANTITY: 3, AS FOLLOWS:

�� BAG: MIL-DTL-22020, CL 1, SIZE: 6 X 8, PLACE ALL ITEMS (3) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

�� IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 10”.

�� INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

9� PREPARE SPN 11, PART NUMBER 19654, CAP SCREW, QUANTITY: 4, AS FOLLOWS:

�� BAG: MIL-DTL-22020, CL 1, SIZE: 6 X 8, PLACE ALL ITEMS (4) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

�� IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 11”.

�� INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

9,� PREPARE SPN 12, PART NUMBER MB990607-01, SOCKET, QUANTITY: 1, AS FOLLOWS:

�� BAG: MIL-DTL-22020, CL 1, SIZE: 4 X 6, CLOSE BAG BY HEAT SEAL OR TAPE.

�� IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 12”.

�� INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

2. CAGE 3. SPI NO.1. PART OR DRAWING NO. (CAGE) NOMENCLATURE

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

19.17. NOTES/DRAWING

O. PREPARE SPN 13, PART NUMBER 19656, CAP SCREW, QUANTITY: 4, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 6 X 8, PLAACE ALL ITEMS (4) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 13”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

P. PREPARE SPN 14, PART NUMBER 11902, RETA INING RING, QUANTITY: 4, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 3 X 5, PLAACE ALL ITEMS (4) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 14”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

Q. PREPARE SPN 15, PART NUMBER 302889, HANDLE ASSEMBLY, QUANTITY: 1, AS FOLLOWS:

1. BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 3 X 24, CLOSE BAG BY HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 15”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 10.

R. PREPARE SPN 16, PART NUMBER 17786, WHEELS, QUANTITY: 2, AS FOLLOWS:

1. WRAP: MIL-PRF-121, TY II, SIZE: 16 X 16, WRAP INDIVIDUAL ITEMS ENTIRELY WITH PAPER, SECURE WITH TAPE ASTM-D6123.

2. IDENTIFICATION: IDENTIFY ITEMS AS “SEGREGATED PACK NUMBER 16”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 10.

S. PREPARE SPN 17, PART NUMBER 24512, PIN, QUANTITY: 2, AS FOLLOWS:

1. BAG: MIL-DTL-22020, CL 1, SIZE: 3 X 5, PLACE ALL ITEMS (2) INTO ONE BAG. CLOSE BAG BY

HEAT SEAL OR TAPE.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 17”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 20.

T. PREPARE SPN 18, PART NUMBER 53780, 12-TON JACK, QUANTITY: 1, AS FOLLOWS:

1. WRAP: MIL-PRF-121, TY II, SIZE: 20 X 24, WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH

TAPE ASTM-D6123.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 18”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR

PRESERVATION METHOD 10.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collect ion of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

20.17. NOTES/DRAWING

U. PREPARE SPN 19, PART NUMBER 61103, ADAPT ER PLATE, QUANTITY: 1, AS FOLLOWS:

1. WRAP: MIL-PRF-121, TY II, SIZE: 24 X 36 , WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH

TAPE ASTM-D6123.

2. IDENTIFICATION: IDENTIFY ITEM AS “SEGREGATED PACK NUMBER 19”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

V. PREPARE SPN 20, PART NUMBER 52083, SIDE PLATE, QUANTITY: 2, AS FOLLOWS:

1. WRAP: MIL-PRF-121, TY II, SIZE: 18 X 18, WRAP INDIVIDUAL ITEMS ENTIRELY WITH PAPER, SECURE WITH TAPE ASTM-D6123.

2. IDENTIFICATION: IDENTIFY ITEMS AS “SE GREGATED PACK NUMBER 20”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

W. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES C – V (SPNS 1 – 20) AS FOLLOWS:

1. CONTAINER: ASTM-D6251, TY III, CL 2, ST I, SEE PAGES 6 – 10 FOR CONTAINER SIZES AND

ITEM LOCATION.

2. IDENTIFY CONTAINER AS “MISCELLANIOUS CONTAINER A”

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

X. PREPARE SPN 21, PART NUMBER 60551, GEAR HOUSING, QUANTITY: 1, AS FOLLOWS:

1. PRESERVATIVE: MIL-PRF-16173, GR 4. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED

METALLIC SURFACES.

2. WRAP: MIL-PRF-121, TY II, QUANTITY: 3, SIZE: 24 X 24, PLACE WRAP ON BOTTOM AND TOP OF

GEAR HOUSING AND END OF SHAFT ASSEMBLY, SECURE PAPER WITH TAPE ASTM-D6123.

3. IDENTIFICATION: IDENTIFY ITEMS AS “SEGREGATED PACK NUMBER 21”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 20.

Y. PREPARE SPN 22, PART NUMBER 60539BL2, ENGINE STAND BASE, QUANTITY 1, AS FOLLOWS,

1. CUSHIONING: ASTM-D4727, TY CF, CL WR, GR V11c, VR DW, SEE PAGES 7 & 11 FOR SIZES AND

ORIENTATION.

2. WRAP: MIL-PRF-121, TY II, QUANTITY: 2, SIZE: 12 X 18, SECURE PAPER WITH TAPE ASTM-

D6123. SEE PAGE 11 FOR PAPER PLACEMENT.

3. TAPE JACK PLATFORM TO UPRIGHT AFTER APPLYING CUSHIONING (ITEM BB), SEE PAGE 11

FOR CLARIFICATION.

4. IDENTIFICATION: IDENTIFY ITEMS AS “SEGREGATED PACK NUMBER 22”.

5. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

21.17. NOTES/DRAWING

Z. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES W – Y AS FOLLOWS:

1. PLACE “MISCELLANIOUS CONTAINER A” INTO CRATE, SEE PAGE 10 FOR ORIENTATION.

2. PLACE SPNS 21 & 22 IN CONTAINER. SE E PAGE 10 FOR ITEM ORIENTAION.

3. CONTAINER: ASTM-D6256, TY II, CL 2, ST A, MODIFIED – FRONT PANEL AND LID ARE TO BE

ATTACHED USING LAG SCREWS, SEE PA GES 7 – 11 FOR CONTAINER SIZES AND ITEM

LOCATION.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION

METHOD 10.

AA. PACKING LISTS: PROVIDE PACKING LISTS IN ACCORDANCE WITH MIL-STD-129 AND AS IDENTIFIED

WITHIN NOTE B OF THIS INSTRUCTION.

BB. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

ITEM SIZE QTY REFERENCE

A 2 X 4 X 18-1/2 8 ASTM-D6199

B 1 X 8 X 56 2 ASTM-D6199

C 2 X 4 X 56 2 ASTM-D6199

D 2 X 4 X 50-3/4 4 ASTM-D6199

E 4 X 4 X 13-1/2 3 ASTM-D6199

2 X 4 X 24 CHAMFER ONE END

45°

2 ASTM-D6199

G 4 X 4 X 13-1/2 2 ASTM-D6199

H 4 X 4 X 5-1/8 3 ASTM-D6199

I 2 X 4 X 20-1/2 2 ASTM-D6199

J 1 X 8 X 40-3/4 1 ASTM-D6199

K 2 X 8 X 16-3/4 2 ASTM-D6199

2 X 4 X 50-1/2 CHAMFER BOTH

ENDS 45°

2 ASTM-D6199

2 X 4 X 8-3/4 CHAMFER ONE

END 45°

2 ASTM-D6199

N 2 X 4 X 8-3/4 2 ASTM-D6199

O 35-3/4 X 13 X 6-1/2 1 ASTM-D6251, TY III, CL 2, ST I

P 2 X 2-3/4 X 13 1 ASTM-D6199

Q 1 X 6-1/2 X 13 1 ASTM-D6199

R 2 X 4 X 6-1/2 4 ASTM-D6199

S 25 X 9-3/4 X 3/8 PLYWOOD 1 A-A-55057, TY A

T 2 X 4 X 8-1/4 2 ASTM-D6199

U 1 X 4 X 25 2 ASTM-D6199

V 10 X 6-1/2 X 1” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

22.17. NOTES/DRAWING

W 12 X 8 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

X 12 X 6-1/2 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

Y 2 X 4 X 55-3/4 2 ASTM-D6199

Z 2 X 4 X 43-5/8 1 ASTM-D6199

AA 2 X 4 X 18-1/2 2 ASTM-D6199

BB 12 X 18 1 ASTM-D4727, TY CF, CL WR, GR V11c, VR DW

CC 12 X 18 2 MIL-PRF-121, TY II

DD 24 X 24 3 MIL-PRF-121, TY II

EE 10 X 56 2 MIL-PRF-121, TY II, COVERS ITEM C

FF 10 X 50-1/2 2 MIL-PRF-121, TY II, COVERS ITEM L

GG LAG SCREW SET 24

LAG SCREW SET CONSISTS OF: 1PC 3/8” X 3-1/2” LAG SCREW

& 1PC 3/8” WASHER

HH 56 X 50-3/4 X 30-3/4 1

ASTM-D6256, TY II, CL 2, ST A, MODIFIED – FRONT

PANEL AND LID ARE TO BE ATTACHED USING LAG

SCREWS

LOCATION OF BLOCKING – SIDE PANEL (INSIDE VIEW)

FRONT OF CRATE

NOTE: OTHER SIDE OF CRATE IS A MIRROR IMAGE

NOTE: FOR CLARITY ITEM EE NOT SHOWN COVERING ITEM C.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

23.17. NOTES/DRAWING

ASSEMBLY #1 ASSEMBLY #2

LOCATION OF BLOCKING – CRATE BASE (TOP VIEW)

FRONT OF CRATE

NOTE: FOR CLARITY ITEM FF IS NOT SHOWN COVERING ITEM L

ITEM N

ITEM D

ITEM F ITEM I

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 9 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

24.17. NOTES/DRAWING

LOCATION OF BLOCKING – CONTAINER, ITEM O (TOP VIEW) CUSHIONING IDENTIFICATION

ASSEMBLY #3 (ITEMS S, T & U) ORIENTATION IN CONTAINER (ITEM O)

ITEM V

ITEM X

ITEM W

ITEM S

ITEM U

ITEM T

ITEM P ITEM Q

ITEM R

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 10 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

25.17. NOTES/DRAWING

ORIENTATION OF ITEMS IN CONTAINER (ITEM O)

LOCATION OF ASSEMBLIES #1 & #2

ASSEMBLY #2 ASSEMBLY #1

FRONT OF CRATE

ASSEMBLY #3 SPN 19 SPN 20 SPN 18

SPN 15

SPNS 1 – 17

SPN 22

SPN 21

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 11 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if i t does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

26.17. NOTES/DRAWING

LID BRACING (BOTTOM VIEW)

LOCATION OF ITEMS BB & CC (SPN 22)

ITEM BB

ITEM CC

TAPE

ITEM AA

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 12 of 12

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 NE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

1750A (45225) STAND,MAINTENANCE,AUTOMOTIVE ENGINE 19207 AK11174344

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4910-01-117-4344 19 OCT 22

27.17. NOTES/DRAWING

LAG SCREW (ITEM GG) LOCATIONS (FRONT VIEW)

LAG SCREW (ITEM GG) LOCATIONS (REAR VIEW)

FRONT OF CRATE

ITEM GG

FRONT PANEL

CONTAINER LID

File details come from the government source that posted it. Updated Dec 15, 2025.