AK10168472.pdf
PDF 343 KB Posted
- Attached to
- Electrical End Bell
- Solicitation number
- SPRDL1-26-Q-0038
About this file
This is a Special Packaging Instruction form (DD Form 2169) dated October 4, 2016, Revision B, for the Cover, End, Generator (Assembly), National Stock Number 2920-01-016-8472, CAGE Code 19207. The part number is 1549879-1 with CAGE code 64547, and the SPI Number is AK10168472. The unit pack weighs 3.4 pounds with a cubic volume of 0.314 cubic feet and dimensions of 9.6 x 9.6 x 5.9 inches.
The packaging requirements specify military preservation using MIL-STD-2073-1, Method 41, with cleaning and drying per MIL-STD-2073-1. Preservation shall use Grade PE-30 applied to bare ferrous surfaces only. The item must be wrapped with two pieces of PPP-C-1797 cushioning material (each 25 x 13 inches), taped with A-A-883, and rotated 90 degrees between wrappings. Packing options include Level A (cleated-plywood boxes per ASTM D6251 or nailed wood boxes per ASTM D6880, both Class 2) or Level B (fibreboard boxes per ASTM D5118 or triplewall corrugated fibreboard per ASTM D5168 Class CGWR, or pallet base consolidation containers per MIL-B-43666, Type III). The container specifications call for ASTM D5118 Style RSC, Grade W5c boxes measuring 9-1/4 x 9-1/4 x 5-1/2 inches with ASTM D1974 closure per Method 2B6. When total shipment quantity to the same destination exceeds 125 pounds, exterior packs without skids must be palletized per MIL-STD-147. Quality assurance requires inspection of preservation and unit packing per MIL-STD-2073-1 and packing inspection per MIL-STD-1186. Marking shall conform to MIL-STD-129.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126Q0038.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-CC
JS
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.
. 1549879-1 (64547) COVER, END, GENERATOR (ASSY) 19207 AK10168472
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2920-01-016-8472 October 4, 2016 B
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 3.4 0.314 9.6 X 9.6 X 5.9
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 41
13. CLEANING 1-B PRESERVATIVE: MIL-PRF-21260
MIL-STD-2073-1 2 INTIMATE WRAP: MIL-PRF-121, TYPE II
14. DRYING SIZE: 25 IN X 13 IN
MIL-STD-2073-1 3-C CUSHIONING: PPP-C-1797, TYPE 1
15. PACKING
SIZE: 25 IN X 13 IN X 1/4 IN.
4 BAG: MIL-DTL-117, TYPE I, CLASS E, SIZE 17 IN X 18 IN
a. LEVEL A
MIL-STD-2073-1 AND NOTE D 5 CONTAINER: ASTM D5118, STYLE RSC, GRADE W5c
b. LEVEL B
SIZE: 9-1/4 X 9-1/4 X 5-1/2 INCHES
MIL-STD-2073-1 AND NOTE D 6 CLOSURE: ASTM D1974, METHOD 2B6
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT PACKING IN ACCORDANCE WITH MIL-STD-1186 AND APPLICABLE CONTAINER
SPECIFICATIONS.
B. APPLY PRESERVATIVE, GRADE PE-30, TO BARE FERROUS SURFACES ONLY.
C. WRAP COVER WITH ONE PIECE OF PPP-C-1797. TAPE SECURELY WITH A-A-883, THEN ROTATE COVER 90
DEGREES AND WRAP WITH SECOND PIECE OF PPP-C-1797.
D. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING CLEATED-PLYWOOD BOXES, CLASS 2,
CONFORMING TO ASTM D6251; OR NAILED WOOD BOXES CONFORMING TO ASTM D6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBREBOARD BOXES, CLASS WEATHER
RESISTANT, CONFORMING TO ASTM D5118; OR TRIPLEWALL, CORRUGATED FIBREBOARD BOXES
CONFORMING TO CLASS CGWR OF ASTM D5168, OR PALLET BASE CONSOLIDATION CONTAINER IN
ACCORDANCE WITH MIL-B-43666, TYPE III.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, LEVEL A AND LEVEL B EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE
WITH MIL-STD-147.
File details come from the government source that posted it. Updated .