AK06794495.pdf

PDF 282 KB Posted May 20, 2026

Attached to: Band Assy-Low and Reverse
Solicitation number: SPRDL1-25-R-0257
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · May 20, 2026

This is a DD Form 2169 Special Packaging Instruction for a Band Assembly - Low and Reverse component (Part Number 8350561, CAGE 19207, National Stock Number 2530-00-679-4495). The document specifies detailed packaging and preservation requirements for a single unit assembly weighing 34.7 pounds with dimensions of 20.1 x 17.0 x 3.9 inches.

The packaging procedure follows a six-step process utilizing MIL-STD-2073-1 standards. Preservation includes application of MIL-PRF-32033 preservative to bare ferrous surfaces, followed by wrapping with MIL-PRF-121 Type I wrap (24 x 48 inches) using weather-resistant tape. Cushioning must be fabricated as a "V" brace per ASTM-D4727 (Corrugated Fiberboard, Type CF, Class DOM, Grade 350, Variety DW, 1 Required) and placed within a primary container (ASTM-D 5118, Type CF, Class DOM, 16-1/4 x 3-1/8 x 18-3/4 inches). The item is then placed in a heat-sealed MIL-DTL-117 Type II Class E bag (21 x 25 inches) and subsequently placed in a secondary container (ASTM-D 5118, Type CF, Class WR, Grade W5c, 16-3/4 x 3-5/8 x 19-1/2 inches). Final packing utilizes either Level A (wood-cleated panelboard or nailed wood boxes per ASTM-D 6251 or ASTM-D 6880) or Level B (weather-resistant fiberboard boxes per ASTM-D 5118 or ASTM-D 5168) containers. All inspection and closure procedures must comply with referenced military and ASTM standards. The form is dated 29 AUG 2024, Revision K, with SPI Number AK06794495.

View the file

Other files

File	Type	Posted
SPRDL125R0257.pdf	PDF	May 20, 2026
SPRDL125R0257-0001.pdf	PDF	May 20, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved

OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

8350561 (19207) BAND ASSY - LOW AND REVERSE 19207 AK06794495

4. NATIONAL STOCK NUMBER 6. REVISION

2530-00-679-4495

5. DATE OF DRAWING

29 AUG 2024 K

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 34.7 0.771 20.1 X 17.0 X 3.9

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 42 1-B PRESERVATIVE: MIL-PRF-32033

13. CLEANING 2-C 1 WRAP: MIL-PRF-121, TYPE I, SIZE: 24 X 48

MIL-STD-2073-1 3-D 1 CUSHIONING: SEE PAGE 2 FOR DETAILS

14. DRYING 4-E 1 CONTAINER:ASTM-D 5118, TY. CF, CL. DOM, VAR. SW,

MIL-STD-2073-1 GR. 200, ST. RSC, SIZE: 16-1/4 X 3-1/8 X 18-3/4

5-F 1 BAG: MIL-DTL-117, TY. II, CL. E, ST. 1, SIZE: 21 X 25

15. PACKING 6-G 1 CONTAINER:ASTM-D 5118, TY. CF, CL. WR, GR. W5c,

a. LEVEL A ST. RSC, SIZE: 16-3/4 x 3-5/8 x 19-1/2

MIL-STD-2073-1 AND NOTE H

b. LEVEL B

MIL-STD-2073-1 AND NOTE H

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. APPLY PRESERVATIVE TO ANY BARE FERROUS SURFACES.

C. WRAP ITEM AND SECURE WRAP USING WEATHER RESISITANT TAPE.

D. FOR FABRICATION AND PLACEMENT OF CUSHIONING SEE ILLUSTRATION ON PAGE 2.

E. PLACE PREPARED PART AND CUSHIONING IN CONTAINER AND CLOSE CONTAINER IN ACCORDANCE

WITH ASTM D1974, METHOD 2B6.

F. PLACE CONTAINER FROM NOTE E IN BAG AND CLOSE BAG BY HEAT SEALING.

G. PLACE ITEM FROM NOTE F IN CONTAINER AND CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

H. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

GUIDANCE ON PALLETIZED UNIT LOADS FOR MILITARY/GOVERNMENT SHIPPERS IS SHOWN IN MIL-

STD-147.

A/R

D FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

NOTES:

1. FABRICATE CUSHIONING PAD AS SHOWN BELOW