AGSU_Mans AWC Tech data_GL-PD-19026A.pdf

INTERIM CHANGES | GL-PD-19026A 5/5/2022

COAT, ALL WEATHER, MEN'S ARMY HERITAGE GREEN 564 FOR SHADE, SHALL BE MADE IN

ACCORDANCE WITH (ARMY) GL-PD-19026A

PATTERN DATE: 13 Mar 2020

SAMPLE SIZE: 40R

PGC: 00181

STANDARD SAMPLE FOR CLOTH, POLYESTER/COTTON POPLIN CLOTH,

HERITAGE GREEN 564 (WATER REPELLENT), CONFORMING TO END ITEM GL-PD-19026A

ROLL NO. 3965 IS AVAILABLE FOR SHADE, FINISH & COLORFASTNESS.

THE CONTRACTOR SHALL STAMP LEGIBLY WITH INDELIBLE INK THE LOT NUMBER ON EACH END ITEM

AND OUTER CONTAINER IN THE LOT.

DLA TROOP SUPPORT CLOTHING AND TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREEMENTS

DATED AUGUST 1, 2021 SUPERSEDES DSCP 4155.3, QUALITY SYSTEMS REQUIREMENTS, DATED

OCTOBER, 2018.

INTERIM CHANGES TO GL-PD-19026A:

PAGE 4 3.2.3 BUTTONS: LINE 4 DELETE FOUR (4) SUBSTITUTE “ADD” THREE (3)

PAGE 4 3.2.3 BUTTONS: LINE 5 DELETE IN ITS ENTIRELY “ONE (1) SHALL BE POSITIONED ON

THE BELT TO CORRESPOND TO BELT ANCHOR BUTTONHOLE AND ONE”

PAGE 8 TABLE II DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING NEW TABLE:

Button Placement Style 1/

Size Diameter Lignes

Compression strength, lbs., Min. 2/

Thickness 3/ Lignes, Min.

Total Quantity per coat

Front & Inside anchor

20 or

45 800 7 8

Sleeve & Shoulder Strap

20 or

30 800 5 4

Sleeve Liner & Back Vent

20 or

24 800 5 3

Stay Buttons & Belt 15 18 800 4 7 Extra Buttons 20 or

45 800 7 1

20 or

30 800 5 1

20 or

24 800 5 1

15 18 800 4 1

Page 19. 7.7 Known Sources ADD 7.7.3

LIST OF APPROVED WATER REPELLENT TREATMENTS FOR MILITARY FABRICS 1/

THE FOLLOWING FLUOROCHEMICALS ARE APPROVED "DURABLE" TYPE WATER REPELLENT TREATMENTS

FOR USE ON MILITARY FABRICS. THEY MAY BE USED ALONE OR COMBINED WITH AN APPROVED

EXTENDER COMPONENT TO PRODUCE A "QUARPEL" TYPE OF WATER REPELLENT TREATMENT REPELLENT

TREATMENTS:

TRADE NAME SUPPLIER

AURAPEL FC-340 AURALUX DIV OF SYBRON

CHEMICAL CO.

P.O. BOX 113

YANTIC, CT 06389

TEL: 860-886-2626

BARPEL 1700 APOLLO CHEMICAL CORP.

PO BOX 2176

BURLINGTON, NC 27215

TEL: 910-226-1161

CHEMSHIELD 939 CHEM-TEX INC.

WR 930 P.O. BOX 1105

1891 N. COLUMBIA ST.

BLDG 106, MILLEDGEVILLE, GA 31061

TEL: 336-578-5476

FABRIC GUARD ML TANNER CHEMICAL CO., INC.

PO BOX 1967, FURMAN HALL

COURT, GREENVILLE, NC 29602

TEL: NO LISTING IN NC ON 800#

ZONYL B CIBA-GEIGY CORP.

ZONYL D P.O. BOX 11422

ZONYL RN 2/ HIGHPOINT, NC 27409

ZONY 6700 TEL: 888-396-2488

ZONYL 6700 GF

ZONYL 7040

ZONYL 8300

ZONYL 8070

ZONYL DWR

ZONYL MIL

FC-232 3M CORPORATION,

FC-251 PROTECTIVE PRODUCTS DIV.

FC-461 ST. PAUL, MN. 02895

FC-831 TEL: 612-737-0098

REPEARL F-14N MITSUBISHI INTERNATIONAL

REPEARL F-35 520 MADISON AVE.

REPEARL F-31 NEW YORK, NY 10022

TEL: 212-605-2440

800-851-5765

NK GUARD FG-280 NICCA USA, INC.

P.O. BOX 1600

5000 NELSON ROAD

FOUNTAIN INN, SC 29644

TEL: 864-862-1426

SEQUAPEL CQR SEQUA CHEMICAL CORP.

SEQUAPEL NRL ONE SEQUA DRIVE

SEQUAPEL WOR CHESTER, SC 29807-0070

SEQUAPEL WOR-46 TEL: 803-385-5181

TEX-TEL NI-40 AUTO CHEMICAL CO.

THREE PARKWAYS

PHILADELPHIA, PA 19102

TEL: 215-419-7000

UNIGUARD-5061 UNICHEM INC.

P.O. BOX 612

916 W. MAIN ST.

HAW RIVER, NC 27258

TEL: 336-578-5476

FLUOROGARD 1700 PUTNAM INDUSTRIES, INC

197 RIDGEWOOD AVE.

GLEN RIDGE, NJ 07028

TEL: NOT LISTED

FLO CHEM EXTRA 17-4 EMCO SERVICES INC.

P.O. BOX 2191

TAUNTON, MA 02780

TEL: 508-823-8852

1/ A SEPARATE LIST OF APPROVED WATER REPELLENT TREATMENTS EXISTS FOR FABRICS

CONFORMING TO CLOTH, CAMOUFLAGE PATTERN; WOODLAND, COTTON AND NYLON, CLASS 2, MIL-C- 44031 AND CLOTH, TWILL, CAMOUFLAGE PATTERN, COTTON AND NYLON FOR DESERT UNIFORM, CLASS

1A, MIL-C-44034.

2/ FOR POLYESTER, NYLON AND BLENDS OF MANMADE FIBERS ONLY.

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL

STANDARDS ISO 9001:2008

OR AMERICAN SOCIETY FOR QUALITY ASQ 2008 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR

BID PROPOSAL FOR EVALUATION AND APPROVAL BY DLA TROOP

SUPPORT'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT

LIMITED TO THE INTERNATIONAL STANDARDS ISO 9001

OR ASQ 2008 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION.

(ref. T1286 )

PACKAGING AND MARKING INSTRUCTIONS:

TEN (10) ALL WEATHER COATS ONE SIZE ONLY SHALL

BE PACKED IN A SNUG FITTING FIBERBOARD SHIPPING

CONTAINER CONFORMING TO ASTM-D5118, TYPE CF,

STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC

WITH A DW LINER. THE DIMENSIONS OF THE CONTAINER

SHALL APPROXIMATE 20-H X 16-W X 24-L. METHOD OF

CLOSURE SHALL BE IN ACCORDANCE WITH ASTM-D-1974,

2A2, FIGURE 1 OR AS AND ALTERNATE 2B6 OR 2B7-

FIGURE 3.

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS

END ITEM DIMENSIONAL 2.5

VISUAL 4.0

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF SAMPLING PROCEDURES AND TABLES FOR

INSPECTION BY ATTRIBUTES, ANSI/AQSC Z1.4,

GENERAL INSPECTION LEVEL 2".

(Ref. W2850)

AQLS FOR COMMERCIAL ITEM DESCRIPTION (CIDS)

END ITEM DIMENSIONAL 2.5

VISUAL 4.0

PALLETIZATION 6.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF "SAMPLING PROCEDURES AND TABLE FOR

INSPECTION BY ATTRIBUTES". ANSI/ASQC Z1.4

GENERAL INSPECTION LEVEL II

(Ref. T7520)