AGSU_AWC_Tech_Data_Womens_GL PD-19027A.pdf

INTERIM CHANGES GL-PD-19027A | (AGSU)) COAT, ALL WEATHER, WOMAN’S 4/18/2022

COAT, ALL WEATHER, WOMEN'S ARMY Heritage Green 564 for shade, SHALL BE MADE IN

ACCORDANCE WITH (ARMY) GL-PD-19027A

PATTERN DATE: 13 Mar 2020

SAMPLE SIZE: 12R

PGC: 00180

STANDARD SAMPLE FOR CLOTH, polyester/cotton poplin cloth, Heritage Green 564 (WATER REPELLENT), CONFORMING TO A-A-50531A

IS AVAILABLE ON ROLL NO. 3965 FOR SHADE, FINISH & COLORFASTNESS.

THE CONTRACTOR SHALL STAMP LEGIBLY WITH INDELIBLE INK THE LOT NUMBER ON EACH END ITEM

AND OUTER CONTAINER IN THE LOT.

LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

A. THIS SOLICITATION/AWARD CONSISTS OF THE FOLLOWING DOCUMENTS, EXHIBITS, AND OTHER

ATTACHMENTS.

B. DLA TROOP SUPPORT CLOTHING AND TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREEMENTS DATED AUGUST 1, 2021, SUPERSEDES DLA TROOP SUPPORT CLOTHING AND TEXTILES ADDITIONAL

QUALITY ASSURANCE REQUIREEMENTS DATED OCTOBER 2018.

THE FOLLOWING LIST OF TEST METHODS WITH NEW TITLES SHALL REPLACE THE OLD NAMES WITHIN

DOCUMENT GL-PD-19027A

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

AATCC EP8 - Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale AATCC EP9 - Evaluation Procedure for Visual Assessment of Color Difference of Textiles AATCC TM8 - Test Method for Colorfastness to Crocking: Crock meter AATCC TM15

- Test Method for Colorfastness to Perspiration AATCC TM16.3 - Test Method for Colorfastness to Light: Xenon Arc AATCC TM20 - Test Method for Fiber Analysis: Qualitative AATCC TM20A - Test Method for Fiber Analysis: Quantitative AATCC TM22 - Test Method for Water Repellency: Spray AATCC TM61 - Test Method for Colorfastness to Laundering: Accelerated AATCC TM70 - Test Method for Water Repellency: Tumble Jar Dynamic Absorption AATCC TM81 - Test Method for pH of the Water-Extract from Wet Processed Textiles AATCC TM118 - Test Method for Oil Repellency: Hydrocarbon Resistance

INTERIM CHANGES TO GL-PD 19027A:

PAGE 1, AFTER FSC, DELETE 8405 AND SUBSTITUTE WITH 8410

PAGE 4, PARAGRAPH 3.2.3 BUTTONS.

LINE 9, DELETE FOUR AND SUBSTITUTE THREE

LINE 10, DELETE, ONE (1) SHALL BE POSITIONED ON THE BELT TO CORRESPOND TO BELT ANCHOR

BUTTONHOLE AND ONE

PAGE 8 TABLE II DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING NEW TABLE:

Button Placement Style 1/

Size Diameter Lignes

Compression strength, lbs., Min. 2/

Thickness 3/ Lignes, Min.

Total Quantity per coat

Front & Inside anchor

20 or

45 800 7 8

Sleeve & Shoulder Strap

20 or

30 800 5 4

Sleeve Liner & Back Vent

20 or

24 800 5 3

Stay Buttons & Belt 15 18 800 4 7 Extra Buttons 20 or

45 800 7 1

20 or

30 800 5 1

20 or

24 800 5 1

15 18 800 4 1

PAGE 9, PARA.3.4 LABELS, ADD NEW PARAGRAPH

"3.4.1.1 DLA TROOP SUPPORT EXCLUSIVE LABEL. EACH COAT

SHALL HAVE THE DLA TROOP SUPPORT EXCLUSIVE LABEL SEWN

TO THE LEFT INSIDE FRONT FACING ABOVE THE

SIZE/INSTRUCTION LABELS. THE LABEL SHALL BE

APPROXIMATELY 2 INCHES WIDE AND BE SEWN

ON ALL FOUR SIDES."

Page 10 3.4.3 DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE

FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING

A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND

DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL

BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND

PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE

LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

Page 19. 7.7 Known Sources ADD 7.7.3

LIST OF APPROVED WATER REPELLENT TREATMENTS FOR MILITARY FABRICS 1/

THE FOLLOWING FLUOROCHEMICALS ARE APPROVED "DURABLE" TYPE WATER REPELLENT TREATMENTS

FOR USE ON MILITARY FABRICS. THEY MAY BE USED ALONE OR COMBINED WITH AN APPROVED

EXTENDER COMPONENT TO PRODUCE A "QUARPEL" TYPE OF WATER REPELLENT TREATMENT REPELLENT

TREATMENTS:

TRADE NAME SUPPLIER

AURAPEL FC-340 AURALUX DIV OF SYBRON

CHEMICAL CO.

P.O. BOX 113

YANTIC, CT 06389

TEL: 860-886-2626

BARPEL 1700 APOLLO CHEMICAL CORP.

PO BOX 2176

BURLINGTON, NC 27215

TEL: 910-226-1161

CHEMSHIELD 939 CHEM-TEX INC.

WR 930 P.O. BOX 1105

1891 N. COLUMBIA ST.

BLDG 106, MILLEDGEVILLE, GA 31061

TEL: 336-578-5476

FABRIC GUARD ML TANNER CHEMICAL CO., INC.

PO BOX 1967, FURMAN HALL

COURT, GREENVILLE, NC 29602

TEL: NO LISTING IN NC ON 800#

ZONYL B CIBA-GEIGY CORP.

ZONYL D P.O. BOX 11422

ZONYL RN 2/ HIGHPOINT, NC 27409

ZONY 6700 TEL: 888-396-2488

ZONYL 6700 GF

ZONYL 7040

ZONYL 8300

ZONYL 8070

ZONYL DWR

ZONYL MIL

FC-232 3M CORPORATION,

FC-251 PROTECTIVE PRODUCTS DIV.

FC-461 ST. PAUL, MN. 02895

FC-831 TEL: 612-737-0098

REPEARL F-14N MITSUBISHI INTERNATIONAL

REPEARL F-35 520 MADISON AVE.

REPEARL F-31 NEW YORK, NY 10022

TEL: 212-605-2440

800-851-5765

NK GUARD FG-280 NICCA USA, INC.

P.O. BOX 1600

5000 NELSON ROAD

FOUNTAIN INN, SC 29644

TEL: 864-862-1426

SEQUAPEL CQR SEQUA CHEMICAL CORP.

SEQUAPEL NRL ONE SEQUA DRIVE

SEQUAPEL WOR CHESTER, SC 29807-0070

SEQUAPEL WOR-46 TEL: 803-385-5181

TEX-TEL NI-40 AUTO CHEMICAL CO.

THREE PARKWAY

PHILADELPHIA, PA 19102

TEL: 215-419-7000

UNIGUARD-5061 UNICHEM INC.

P.O. BOX 612

916 W. MAIN ST.

HAW RIVER, NC 27258

TEL: 336-578-5476

FLUOROGARD 1700 PUTNAM INDUSTRIES, INC

197 RIDGEWOOD AVE.

GLEN RIDGE, NJ 07028

TEL: NOT LISTED

FLO CHEM EXTRA 17-4 EMCO SERVICES INC.

P.O. BOX 2191

TAUNTON, MA 02780

TEL: 508-823-8852

1/ A SEPARATE LIST OF APPROVED WATER REPELLENT TREATMENTS EXISTS FOR FABRICS

CONFORMING TO CLOTH, CAMOUFLAGE PATTERN; WOODLAND, COTTON AND NYLON, CLASS 2, MIL-C- 44031 AND CLOTH, TWILL, CAMOUFLAGE PATTERN, COTTON AND NYLON FOR DESERT UNIFORM, CLASS

1A, MIL-C-44034.

2/ FOR POLYESTER, NYLON AND BLENDS OF MANMADE FIBERS ONLY.

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL

STANDARDS ISO 9001:2008

OR AMERICAN SOCIETY FOR QUALITY ASQ 2008 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR

BID PROPOSAL FOR EVALUATION AND APPROVAL BY DLA TROOP

SUPPORT'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT

LIMITED TO THE INTERNATIONAL STANDARDS ISO 9001

OR ASQ 2008 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION.

(ref. T1286 )

PACKAGING AND MARKING INSTRUCTIONS:

TEN (10) ALL WEATHER COATS ONE SIZE ONLY SHALL

BE PACKED IN A SNUG FITTING FIBERBOARD SHIPPING

CONTAINER CONFORMING TO ASTM-D5118, TYPE CF,

STYLE RSC,GRADE 275, VARIETY SW, CLASS DOMESTIC

WITH A DW LINER. THE DIMENSIONS OF THE CONTAINER

SHALL APPROXIMATE 20-H X 16-W X 24-L. METHOD OF

CLOSURE SHALL BE IN ACCORDANCE WITH ASTM-D-1974,

2A2, FIGURE 1 OR AS AND ALTERNATE 2B6 OR 2B7-

FIGURE 3.

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS

END ITEM DIMENSIONAL 2.5

VISUAL 4.0

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF SAMPLING PROCEDURES AND TABLES FOR

INSPECTION BY ATTRIBUTES, ANSI/AQSC Z1.4,

GENERAL INSPECTION LEVEL 2".

(Ref. W2850)

AQLS FOR COMMERCIAL ITEM DESCRIPTION (CIDS)

END ITEM DIMENSIONAL 2.5

VISUAL 4.0

PALLETIZATION 6.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF "SAMPLING PROCEDURES AND TABLE FOR

INSPECTION BY ATTRIBUTES". ANSI/ASQC Z1.4

GENERAL INSPECTION LEVEL II

(Ref. T7520)