Attachment_3_NCSC_Lead_Paint_Results.pdf

EMC LABS, INC.

9830 South 51st Street, Suite B-109 / PHOENIX, ARIZONA 85044 / 480-940-5294 or 800-362-3373 / FAX 480-893-1726 emclab@emclabs.com

ANALYST: QA COORDINATOR:

Jason Thompson Kurt Kettler

Rev. 11/30/08

LEAD (Pb) IN PAINT CHIP SAMPLES

EMC SOP METHOD #L01/1 EPA SW-846 METHOD 7420

EMC LAB #: L48288 DATE RECEIVED: 03/11/13

CLIENT: Shasta Trinity National Forest-US Forest Service REPORT DATE: 03/12/13

DATE OF ANALYSIS: 03/12/13

CLIENT ADDRESS: 3644 Avtech Parkway

Redding, CA 96002

P.O. NO.:

PROJECT NAME: NCSC Hanger Roof PROJECT NO.:

EMC #

L48288-

SAMPLE

DATE /13

CLIENT

SAMPLE #

DESCRIPTION

REPORTING

LIMIT

(%Pb by weight)

%Pb BY

WEIGHT

1 03/07 #1 Hanger Roof 0.010 1.07

2 03/07 #2 Hanger Roof 0.010 0.180

3 03/07 #3 Hanger Roof 0.010 0.052 ^ = Dilution Factor Changed * = Excessive Substrate May Bias Sample Results BRL = Below Reportable Limits # = Very Small Amount Of Sample Submitted, May Affect Result

This report applies to the standards or procedures identified and to the samples tested only. The test results are not necessarily indicative or representative of the qualities of the lot from which the sample was taken or of apparently identical or similar products, nor do they represent an ongoing quality assurance program unless so noted. Unless otherwise noted, all quality control analyses for the samples noted above were within acceptable limits.

Where it is noted that a sample with excessive substrate was submitted for laboratory analysis, such analysis may be biased. The lead content of such sample may, in actuality, be greater than reported. EMC makes no warranty, express or implied, as to the accuracy of the analysis of samples noted to have been submitted with excessive substrate. Resampling is recommended in such situations to verify original laboratory results.

These reports are for the exclusive use of the addressed client and are rendered upon the condition that they will not be reproduced wholly or in part for advertising or other purposes over our signature or in connection with our name without special written permission. Samples not destroyed in testing are retained a maximum of sixty (60) days.