AG-87BJ-S-16-0007.pdf

AG-87BJ-S-16-0007

Blacktail Fishing Pier Grand River Ranger District, Dakota Prairie Grasslands

Solicitation Issue Date: June 16, 2016

Method of Solicitation: Request for Quotation (RFQ).

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart

12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

The solicitation and incorporated provisions and clauses are those in effect through the most current Federal

Acquisition Circular FAC 2005-88, dated May 16, 2016.

North American Industry Classification (NAICS): 336611 (Ship Building and Repairing Rental and Leasing, Drydock, floating, building), Size Standard is 1,200 Employees.

Set Aside: 100% small business set-aside.

General Information: The intent of this solicitation is to obtain quotes for supply and install dock. See below for complete project description.

Provide quote by: 2:30 p.m., Mountain Standard Time on June 30, 2016.

DOCUMENTS TO RETURN:

The following documents shall be submitted by the offeror for evaluation to be considered responsive:

Contractors wishing to submit a quote must include the following:

Schedule of Items

Manufacture literature, design calculation and/or shop drawings for the fishing pier and gangway.

Annual Representations & Certifications

Experience Questionnaire

Acknowledge Amendments per the instructions in Block 11 on the SF-30) if applicable.

Send quote to: Forest Service, East Side Acquisition Team (ESAT)

Attn: Dana Bangart

Physical: 10 E Babcock, Bozeman, MT 59715

Mailing: P.O. Box 130, Bozeman, MT 59771

E-mail: dbangart@fs.fed.us

For solicitation questions call Dana Bangart at (406) 587-6763. For information regarding the site, please contact

Russ Walsh at 701-227-7836.

mailto:dbangart@fs.fed.us

Grand River Ranger District

Dakota Prairie Grasslands, North Dakota

Pay

Item

Description Method of

Measurement

Pay

Unit

Estimated

Quantity

Unit Price Total Price

001 Delivery/Installation LS LS xxxxxx $ $

002 Pre-Fabricated Gangway AQ EA 1 $ $

003 Floatable Fishing Pier System CQ SF 350 $ $

TOTAL $

This is a Request for Quotation (RFQ); therefore, no public opening will be held. The results will not be made public prior to award. Quotes submitted in response to this RFQ will not be returned, but will be retained by the U.S. Forest Service for official record purposes. The RFQ does not commit the Government to pay any costs incurred in the preparation or the submission of this quote, or to make any award.

There is no formal site visit scheduled for this project. Interested vendors who are in need of further information can contact Russ Walsh, Civil Engineer Technician, Medora Ranger District, Dakota Prairie Grasslands at 701-227-7836.

Vendor shall have a DUNS number and be registered in the System for Award Management (www.sam.gov) prior to award.

The Forest Service has transitioned to an electronic invoice system called Invoice Processing Platform (IPP). Vendors are required to set-up an account at www.ipp.gov in order to submit invoices.

Price Quotation furnished by:

Name: _______________________________ Phone: ____________________________

Address: ______________________________ Cell: ____________________________

______________________________ FAX: ____________________________

E-Mail: ________________________________ DUNS # ___________________________ http://www.ipp.gov/

Statement of Work

Description. The project consists of the supply and installation of new all-in-one floatable fishing pier system and an aluminum gangway with hand rails around the entire structure. All work shall be in compliance with the

American Disabilities Act, (ADA) and with the requirements, for this project. For purposes of this document the term fishing pier and dock are synonymous.

Brand Name or Equal (per FAR 11.104). The floating fishing pier system may be an EZ Dock system using

ThruFlow® panels for gangway frames and railings or an approved equal. An “equal” item shall comply with the salient physical, functional, and performance characteristics provided in the Supplemental Specifications, Section

645 & 646.

NOTE: The Forest Service Supplemental Specifications are provided to ensure commercial item solicited meets the salient characteristics. This project is not being solicited as a construction project under FAR Part 36.

Project Location. The project is located at the Blacktail Recreation Area in SW Section 4, Township 20 North, Range 16 East in Perkins County, South Dakota (see map).

Period of Performance. It is anticipated work can begin July 2016 and shall be completed by October 2016.

Submittals. Submit manufacture literature, design calculation and/or shop drawings for the fishing pier and gangway.

Permits. Contractor is responsible for all necessary permits including call before you dig.

Existing Facilities. In addition to the requirements of the Use of Premises Clause, AGAR 452.236-70, all existing facilities structures damaged by the Contractor shall be replaced or repaired by the Contractor at no additional cost to the Government. This includes any facilities inside or outside the project limits, including along any access routes.

Do not trim or damage vegetation except with specific Contracting Officers (CO) approval.

Pollution and Erosion Control. During all operations under this contract, the Contractor shall exercise reasonable measures to prevent or minimize soil erosion and pollution of water and other resources. All refuse, including garbage, rubbish, and solid or liquid wastes, from the Contractor's operations, including camps, parking areas, and equipment maintenance areas shall be stored, collected, and disposed of in a sanitary and nuisance-free manner. Refuse shall be disposed of in State-approved landfills unless otherwise approved by the Contracting

Officer (CO).

Storage and Stockpiling. The Contractor shall confine storage of equipment, materials, and vehicles to within the limits delineated by the Contracting Officer. The Contractor shall be solely responsible for the loss of or damage to materials stored on Forest Service lands or elsewhere.

Worksite Cleanliness and Final Cleanup. Maintain the project work areas in a clean and orderly condition throughout the progress of work under this contract. All refuse, including garbage, rubbish, and solid or liquid wastes from the Contractor's operations shall be stored and collected in a sanitary manner and disposed of off

Government property in a legal manner. Maintain strict control of hazardous materials to prevent contamination of the site.

Equipment Specifications. Equipment and tools shall be in good mechanical and operating condition, fully capable of performing all phases of the specified work.

Weather Conditions. Work will be suspended if, in the opinion of the Contracting Officer, weather conditions preclude effective protection of resources, site rehabilitation, or otherwise impact project end results in a significant, negative manner.

Noxious Weed Control. In order to prevent the potential spread of noxious weeds, the Contractor is required to furnish weed-free equipment. The Contractor’s equipment shall be cleaned to remove all dirt and plant parts and material that may carry noxious weed seeds into the construction area. All subsequent move-ins shall be treated the same as the initial move-in. Prior to move-in the Contractor shall make equipment available to Forest Service inspection at an agreed location.

Hauling and Diposal of Materials. All materials removed from the site shall be disposed of in a legal manner off

National Forest System lands. All fees associated with material disposal shall be paid by the Contractor.

Clean-up and Disposal. The Contractor shall at all times keep the area in an orderly condition. Upon completing the work, the Contractor shall remove from the site and premises any rubbish, tools, equipment, and materials that are not the property of the Forest Service. Upon completing the work, the Contractor shall leave the work areas in a clean, neat, and orderly condition satisfactory to the Contracting Officer.

Existing Utilities. The Contractor is responsible for location of all utilities prior to beginning work. Damaged utilities shall be repaired at the Contractor’s expense.

Fire Control. The Contractor, whether or not directed by the Forest Service, shall immediately extinguish, without expense to the Government, all fires on or in the vicinity of the project which are caused by Contractor's employees, whether set directly or indirectly as a result of Contractor operations. The Contractor may be held liable for all damages and costs of additional labor, subsistence, equipment, supplies, and transportation resulting from fires set or caused by the Contractor's employees or resulting from contract operations.

Submittals. Submittals are required as part of the response to the solicitation. Prior to award, the submittals shall either be accepted or rejected.

Salient Characteristics

645-PREFABRICATED GANGWAY

Description

Design, fabricate, deliver, and install a complete aluminum boat dock gangway system. Gangways shall be removable for winter storage. Each gangway shall weigh less than 340 pounds including decking, railing, transition piece and all appurtenances.

Construction Requirements

645.01 Provide a gangway fabricated by a commercial manufacturer with experience in boat dock gangway construction. Construct to the dimensions shown on the contract drawings. Include all incidental materials required to provide a completed structure ready for use.

645.02 Design the aluminum members to conform to the current edition of The Aluminum Association

Specification and Guidelines for Aluminum Structures. Provide aluminum welding in accordance with the

ANSI/AWS D1.2-97 gas metal arc welding process and perform all welding by experienced operators. Construct all exposed surfaces and their welded joints so they are smooth and free of sharp or jagged edges.

645.03 Design the gangway for a live load of 90 pounds per linear foot. Use deck material designed for a concentrated vertical load of 400 pounds distributed over a one square foot area. Deck material shall be composed of extruded aluminum, OR vented, interlocking virgin mineral fiber-reinforced polypropylene panels. Deck panels shall be skid resistant, UV treated, and maintenance free. Supply with light tan or maple colored deck panels.

645.04 Use only aluminum extrusions for gangway structures meeting the aluminum alloy 6061-T6, 6063-T5 and

6063-Tg requirements and extruded in accordance with requirements of applicable sections of Federal

Specification QQ-A-200. Use grade 304 stainless steel fasteners. Design all handrails for a horizontal load of 20 pounds per linear foot. Installed gangways shall meet current Americans with Disabilities Act (ADA) requirements for new construction. Construct gangway railings as a free span truss design. Handrails shall be continuous along both sides of the walking surface and shall extend 12’ past the walking surface on both ends.

The ends of the handrails shall be returned into the hand rail body or terminate with no sharp or jagged edges.

645.05 Use an aluminum transition plate where necessary to ensure a smooth transition on each end of gangway that is a minimum 0.25” thick by 48” wide by up to 30” long with a slip resistant surface.

645.06 Use a continuous kick plate or barrier along the edge of the walking surface inside the railing.

645.07 Submit manufactures literature, design calculation and/or shop drawings sufficiently in advance of the start of fabrication to allow to for review by the CO and correction of any changes.

645.08 Provide the hinged end of the gangway, designed by the gangway manufacturer, to connect to the pier.

Measurement

645.09 Measure the Section 645 item listed in the bid schedule according to Subsection 109.02.

Payment

645.10 The accepted quantities will be paid at the contract price per unit of measurement for the Section 645 pay item listed in the bid schedule. Payment will be full compensation for the work prescribed in this Section. See

Subsection 109.05

646-ALL-IN-ONE FLOATABLE FISHING PIER SYSTEM

Description

Design, fabricate, deliver, and install floatable all-in-one fishing pier comprised of light weight interchangeable modules with decking surface integral to floatation. Construct the length, width, and capacity of the dock systems, including all appurtenances as shown on the Drawings.

646.01 General. Provide a self-contained fishing pier system from a commercial manufacturer experienced in molded, all-in-one dock construction. Construct components to the dimensions shown on the contract drawings.

Include all incidental materials required to provide a completed structure ready for use. Incorporated steel products/components must comply with “Buy America” Act policies.

646.02 Design Requirements for Individual Dock Modules.

The dock system, anchorage, and connections shall be designed according to the recommendations of the

American Society of Civil Engineers Manual and Report on Engineering Practice Number 50, “Planning and

Design Guidelines for Small Craft Harbors”, the revised edition. At a minimum, conform to the live loading requirements stated herein.

Each individual dock module/section shall consist of decking surface and the float structure, which are to be constructed as a single, integrated component. Each module shall provide for the support of the module dead load plus a specified live load of 62 pounds per square foot (+/- 1%). This shall be accomplished without the use of foam for either structural integrity or floatation. The dock sections shall be manufactured by a rotational molding process. The individual dock sections shall contain a number of integral interior, air-filled pylons. These pylons shall provide for floatation in the event of a breach of an exterior wall of the dock section; as well as the structural support for the deck portion of the float. Each interior air-filled pylon shall support the dead load plus a live load of 55 pounds. The volume of each air-filled pylon shall be no less than 1540 cubic inches.

Each module/section will incorporate a hydrophobic vent to be located at least 5 inches above mean water level.

The purpose of this vent is to allow dock sections to “breath” such that they do not change shape due to air pressure fluctuations during atmospheric temperature changes. Hydrophobic vents shall not allow water to pass through.

646.03 Design Requirements for the Constructed Dock System.

The dock system shall be capable of withstanding the impact force caused by a 35 foot boat striking the end of a finger at a speed of 2 miles per hour (mph) and at an angle of 10 degrees off center. The dock system shall be designed to,” freeze in” left in the water over winter, without damage to the dock sections.

646.04 Dock Material. Individual dock modules/sections shall be rotationally molded from virgin polymer, thermoplastic, linear, low-density polyethylene (LLDPE). LLDPE for dock module construction shall be molded with beige, light brown or tan colorant and an ultraviolet (UV) light inhibitor additive. The completed modules shall be constructed to resist 8000 hours (or more) of UV exposure with less than a 7% decrease (cumulative) in the mechanical strength properties of the LLDPE.

All material used in the dock structure shall provide for resistance to rust, corrosion, and the effects of any spilled fuel or gasoline. All material designed and selected for marine environment and the conditions thereof.

646.05 Dock Properties and Strength Requirements.

(a) The dock section shall have a cold brittleness temperatures equal to (or less than) -130 degrees

Fahrenheit, per ASTM D-746:

(b) The properties of the exterior wall thickness of the dock sections shall be as follows:

(1) The mean exterior material thickness shall be no less than .310 inches.

(2) The corners shall be no less than .650 inches.

(3) The walls of the dock sections shall resist a shear of no less than 1900 pounds per square inch, per ASTM D-732, as well as having the capability of resisting a minimum impact of no less than 220 foot-pounds, per ASTM D5420.

(4) The tensile strength at failure shall be no less than 2630 pounds per square inch, per ASTM

D638.

(c) The decking surface shall be composed of a textured surface with an overlying grid pattern for added adhesion during dry conditions. Drainage of the decking surface shall be accomplished through the use of troughs, which shall extend over the width of the dock and shall be positioned at intervals of no less than 4.5 inches and no greater than 6.5 inches over the entire length of the module. Additional properties of the decking surface shall be as follows:

(1) The deck shall have an approximate coefficient of friction equal to 0.35 during dry conditions and

0.61 during wet conditions (as measured per ASTM D2394).

(2) The mean deck thickness shall be no less than 0.315 inches.

(3) The deck thickness shall be no less than 0.290 inches at any particular point.

(4) The deck shall resist a punching shear which is no less than 1900 pounds per square inch, per

ASTM D732.

(5) The deck shall resist a minimum impact of no less than 120 foot-pounds near the center, or at the point where the deck is thinnest, per ASTM D-3029.

(6) The deck shall resist a minimum impact of no less than 150 foot-pounds within 16 inches of the outside of the module edge, per ASTM D-3029.

646.06 Floating Dock Structure/System. The dock structure, as a whole, shall consist of the individual modules/sections, which are to be coupled together in the specific configurations shown on the Construction

Plans. The dock structure shall act as one unit when assembled, so that wave and/or wind action shall produce a minimum amount of motion. The securing piles shall prevent the dock from drifting, allow the structure to rise and fall freely with any water level changes and allow the structure to span waves from crest to crest, while providing a stable walking surface. The piles shall be 2.5” OD, 0.25” wall thickness aluminum pipe driven to the point of refusal but not less than 2.5’feet deep. Construct all exposed surfaces and their welded joints so they are smooth and free of sharp or jagged edges.

646.07 Connection of Dock Sections/Components. Each dock section shall have molded-in female-type pockets spaced symmetrically along the top and bottom edges, around the entire perimeter of the dock section. These pockets shall be spaced at 19.5 inch intervals, center line to center line, from each other. The molded-in female-type pockets shall accept a male-type tapered coupler which shall be secured into the female pocket with the use of a 0.5 inch x 13 inch coupler bolt and nut. The purpose of such connections is to provide for simple assembly and disassembly, as well as providing for the securing of one section to another. The connection will also provide for the ability to attach accessories to the dock sections. Each connection point shall allow for some slippage in the event that an extreme stress is applied. This slippage will allow for disconnection without causing damage either to the male-type couplers or the female-type pockets.

Male-type couplers shall be constructed of no less than 90% post/pre-consumer recycled tire rubber. Each male-type coupler shall withstand a pullout force of no less than 2500 pounds before failure of coupler occurs. Each of the molded in female connection pocket shall provide for a pullout strength of no less than 3500 pounds, before damage is caused to the dock section.

The tops of adjacent connected dock modules shall have an elevation difference of no more than 0.125 inches. In addition, the deck surface of each individual dock module may not slope at a rate of more than 0.45% over the length and width each individual dock section.

646.08 Handrail The dock structure shall have staggered height railing around the entire fishing pier constructed to meet the standards established by the Americans with Disabilities Act (ADA), States Organization for Boating

Access (SOBA) and the National Building Code (NUBC), and manufacturer recommendations. The railing shall be constructed of 60/63 T-6 aluminum tubing 1.5” O.D. 1/8” Sidewall. Handrails shall be connected to the dock system through the use of molded in coupler pockets. Use grade 304 stainless steel fasteners to attach hand rails to dock structure.

Measurement

646.09 Measure the Section 646 item listed in the bid schedule according to Subsection 109.02.

Payment

646.10 The accepted quantities will be paid at the contract price per unit of measurement for the Section 646 pay item listed in the bid schedule. Payment will be full compensation for the work prescribed in this Section. See

Subsection 109.05

Commercial Items Terms and Conditions

FAR 52.212-4 Contract Terms and Conditions - Commercial Items. (May 2015)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -

Commercial Items. (Mar 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C.

3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995)

(41 U.S.C. 4704 and 10 U.S.C. 2402).

_x__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun

2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009).

___ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub.

L. 111-117, section 743 of Div. C).

___ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41

U.S.C. 2313).

___ (10) [Reserved]

___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014)

(if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved]

_x__ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Oct 2001) of 52.219-9.

___ (iii) Alternate II (Oct 2001) of 52.219-9.

___ (iv) Alternate III (Oct 2015) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C.

657f).

_x__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns

Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_x__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_x__ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126).

_x__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

___ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

___ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

___ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

___ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

_x__ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May

2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and

13514

___ (ii) Alternate I (Oct 2015) of 52.223-13.

___ (37) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (39) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015) (E.O.s

13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

_x__ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O.

13513).

_x__ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

___ (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter

83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-

77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (43) 52.225-5, Trade Agreements (Feb 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___ (44) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

___ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10

U.S.C. 2307(f)).

___ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

_x__ (50) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul 2013) (31

U.S.C. 3332).

___ (51) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul

2013) (31 U.S.C. 3332).

___ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)

_x__ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

_x__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

Employee Class Monetary Wage--Fringe Benefits 4607 Wage Grade 7 $20.29 + fringe

___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple

Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C. chapter 67).

___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May

2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (May 2014) (41 U.S.C. chapter 67).

_x__ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

___ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).

___ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xi) _x___ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section

862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).

Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx

1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

Attachments

Attachment 1: Experience Questionnaire

Attachment 2: Service Contract Act Wage Determination No. 2005-2407, Rev. No. 17, dated 12/29/2015

Attachment 3: Vicinity Maps and Pier Drawing

Commercial Item Provisions

52.204-16 --Commercial and Government Entity Code Reporting (Jul 2015)

52.212-1 - Instructions to Offerors - Commercial Items (Oct 2015)

52.211-6 Brand Name or Equal (Aug 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must—

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by—

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Apr 2016) The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C.

395(c).

http://www.acquisition.gov/

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan

Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers

Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women;

or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women;

and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at

FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (r) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the

United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.

https://www.acquisition.gov/

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph…